Workpiece holder / workpiece fixture

EROWA EROWA UPC Palettenaufnahme

Kondisi: bekas, Gergaji BEHRINGER HBE 321 A Dynamic Blsdpfx Afsx Tvkxj Ssp

Kondisi: bekas, Tahun pembuatan: 2006, Rentang pengukuran Lebar/ Panjang/ Tinggi 1600/ 1800/ 1000 mm Dimensi Lebar/ Panjang/ Tinggi 2450/ 2940/ 3800 mm Berat benda kerja maksimum 3500 kg Berat mesin pengukuran 8500 kg Kecepatan gerak lambat 0 - 5 mm/dtk Kecepatan gerak saat penyesuaian 0 - 70 mm/dtk Mode pengukuran seri Bedpfx Afezn Iucs Sjlp Sumbu kecepatan maksimum 300 mm/dtk Vektor kecepatan maksimum 425 mm/dtk Versi perangkat lunak Calybso 2023/ Paket Layanan 2 --- Versi 7.6.08 Berbagai jenis sensor pengukuran Kepala pengukuran

Kondisi: bekas, Tahun pembuatan: 2012, Technische Details Bljdpfjy Amllox Af Sjp

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, kapasitas pendinginan: 680 kW (924,54 hp), jenis pendinginan: udara, Perlengkapan: unit pendingin, Condenser Manufacturer: Güntner GVH 090.1.D/5-M(D) Year of manufacture: 2004 Nominal capacity: 680.4 / 579.2 kW Refrigerant: R404 Refrigerant content: 218.9 + 25 liters Flow rate: Temperature range: -50°C to +100°C Maximum pressure: Operating pressure: 28 bar / -1 bar (Capacity depends on operating parameters) Number of fans: 5, diameter 900 mm Airflow rate: 162,500 / 131,000 m³/h Motor power consumption: 17.60 / 11.50 kW Heat exchanger surface area: Operating noise: 52 dB Length: mm Height: mm Width: mm Bodpfx Afevllxdj Sjlp Weight: approx. kg The cooler has been technically tested and is fully functional.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, Ayunan 806mm, Ayunan di atas cross slide 527mm, Diameter pemotongan maksimum 457mm, Jarak antara pusat 762mm, Bljdjzg Efiopfx Af Sjp Panjang pemotongan maksimum 584mm, Sumbu C 0,01 derajat, Milling 3000rpm, 3,7kW, Sumbu Y +/- 50mm, Kapasitas batang 76mm, Motor spindle 22,4kW, Spindle 3400rpm, Kecepatan rapid feed 24m/menit, Turret 24 posisi, konveyor serbuk, tailstock, pengukur alat, pendingin,

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, DMG Deckel Maho DMC 1035 V, Pusat Pemesinan Vertikal. Mesin ini dalam kondisi sangat baik, baik secara visual maupun teknis. Pemeriksaan saat mesin beroperasi dapat dilakukan kapan saja. Spesifikasi Teknis: Tahun Pembuatan: 2008 Kontrol: Heidenhain iTNC530 Rentang Gerak: X: 1.035 mm Y: 560 mm Z: 510 mm Area Penjepitan: 1.200 mm x 560 mm Kecepatan Putaran Spindel: 10.000 rpm Pengganti Alat: 20 posisi Pemasangan Alat: SK40 Bledpfx Afszun Sno Ssp Pengalihan Udara Bertekanan untuk Pendingin Roda Tangan Elektronik Mode Operasi 4 Wadah Pendingin gratis di atas truk, syarat EXW Hagen

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2026, Compact wide belt sander with combination sanding unit Special features: - Switching the sanding pad on and off from the control panel - Switching the roller on and off from the control panel - Electronic controller Fox 500 KTR - Table extension with 2 rollers for infeed and outfeed - Automatic table positioning via pushbutton Article number: 5222100A2 Suitable for smaller workshops for occasional use Combination sanding unit with sanding pad for fine sanding Standard equipped with diagonally grooved steel roller Ø 120 mm for calibration Blodpfx Afogf Sw No Sop Fine adjustment of working height Clear control panel at the front Robust monoblock steel machine frame with tubular reinforcement, robot-welded, with working units mounted high for maximum rigidity Motorized height adjustment of working table with digital display Electronically controlled sanding belt oscillation Carpet feed via gear motor with two speeds Natural rubber feed carpet with negative profile Flexible steel pressure bar in front of the first unit Rubber pressure rollers before and after each processing unit Pneumatic belt tensioning per unit with decimal correction for grit/belt thickness Universally usable for solid wood and veneer thanks to combination unit Entry-level model for smaller companies Working width 950 mm Equipment details Combination unit for calibration and sanding Diagonally grooved steel roller Ø 120 mm with fine height adjustment Hard sanding pad with graphite covering Universal version for calibration and sanding of solid wood, chipboard, and veneer Technical data Length (product) approx. 1388 mm Height (product) approx. 1668 mm Width/depth (product) approx. 1545 mm Dust extraction connection Extraction nozzle diameter 140 mm Electrical data Connection voltage 400 V Power type AC Phase(s) 3 Ph Network frequency 50 Hz Feed motor power 0.33 / 0.55 kW Table height adjustment motor power 0.25 kW Main drive motor power 7.5 kW Sanding unit Sanding belt length 1525 mm Max. sanding width 950 mm Sanding belt width 970 mm Feed unit Feed speed 4.5 / 9 m/min Workpiece Min. workpiece height 4 mm Max. workpiece height 170 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, jam operasional: 28.000 h, Fungsionalitas: berfungsi sepenuhnya, gaya penjepit: 1.300 kN, For sale is a hybrid injection molding machine, 2-component, manufactured by KraussMaffei, model KM 130-750 CX. Bjdpfx Afou Hxm Uo Selp The machine is in excellent condition, immediately operational, and has low operating hours. It features an electronic injection and dosing unit, along with a hydraulic clamping unit. Technical data: Year of manufacture: 2011 Operating hours: 28,000 h Clamping force: 130 t Cylinder Ø 30 mm / 40 mm (plus 2*50 mm additionally) Core pull: 1*Hydraulic Needle shut-off: Pneumatic Tie bar extension: 160 mm Cavity pressure sensor Selector valve Transport and loading can be organized Europe-wide upon request and for an additional charge. All prices are subject to VAT. Inspection possible by appointment. Contact us—our team will be glad to assist you. Trade-in or exchange possible! Machinery Buying & Selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE Are you looking for a high-quality yet affordable metalworking machine for your production? Or would you like to sell yours? For further information or contact options, please visit our website.

Tahun pembuatan: 1990, Kondisi: bekas, x-travel 850 mm y-travel 1200 mm z-travel 600 mm Total power requirement: kW Machine weight approx.: t Space requirement approx.: m Overhauled: 2000 X-axis as longitudinally movable gantry: 850 mm Y-axis cross slide in the gantry: 1,200 mm Z-axis as measuring head quill (vertical): approx. 600 mm Clearance between gantry columns: approx. 1,000/1,080 mm Clearance height: approx. 750 mm Total table size: approx. 1,000 x 2,100 mm Table height above floor: approx. 850 mm Machine height: approx. 3,050 mm Bedpfx Aet Hwqksf Selp Weight: approx. 3,800 kg Special equipment / accessories: - Granite plate as measuring table and as crossbeam, vibration-dampened - 3D measuring probe for accommodating 5 different probe tips and for SCANNING operation for continuous data acquisition, resolution 0.1 µm - Simultaneous control of all 3 axes - HEWLETT-PACKARD computer system H 382 with color monitor, floppy disk drive, keyboard, and possibly printer - ZEISS software available as follows: UMESS 300/MFT 300 with expansion package (version 1998), plus 302 Form and Position Measurement, 303 Fit Functions, 305 Automatic Operation, 307 Parameter Control Manager, and the following options: Tools/KMG Disk Rev. 7xxx / SAM 300 / KMG Disk / Drill Pattern Program A 741 and Probe Check 99 - Mobile manual control panel with progressive control lever for continuously adjustable travel speed of all 3 axes - Probe magazine mounted on the machine, equipped with 3 probes, with automatic probe changing device - Separate electrical and control cabinet Type 608485, separate computer table, separate cabinet - Operating manuals, various measuring probes, and ball/standard measuring normal that can be fixed to the table,

Kondisi: bekas, Tahun pembuatan: 2015, Mesin Bubut CNC Tipe Swiss TSUGAMI B0206E-III Kondisi sangat baik, hanya 6.000 jam penggunaan SPESIFIKASI TEKNIS: Tahun Pembuatan: 2015 Kontrol CNC: FANUC seri 32i-B Blsdpfx Aozp D Uuof Sjp Jumlah Sumbu: 6 Kecepatan Gerakan Cepat Sumbu X1: 24.000 mm/menit Kecepatan Gerakan Cepat Sumbu X2: 24.000 mm/menit Kecepatan Gerakan Cepat Sumbu Z1: 32.000 mm/menit Kecepatan Gerakan Cepat Sumbu Z2: 32.000 mm/menit Kecepatan Gerakan Cepat Sumbu Y1: 15.000 mm/menit Kecepatan Gerakan Cepat Sumbu Y2: 15.000 mm/menit Diameter Batang Maksimum: 20 mm Kecepatan Spindel Minimum: 200 RPM Kecepatan Spindel Maksimum: 10.000 RPM Resolusi Sumbu C: 0,001° Daya Spindel: 3,7 kW Kecepatan Spindel Balik Minimum: 200 RPM Kecepatan Spindel Balik Maksimum: 12.000 RPM Resolusi Sumbu C Spindel Balik: 0,001° Daya Spindel Balik: 2,2 kW Jumlah Posisi Kepala Alat Depan: 8 Jumlah Posisi Kepala Turret 1: 5 Jumlah Posisi yang Digerakkan pada Kepala Turret 1: 3 Kecepatan Alat yang Digerakkan pada Kepala Turret 1: 8.000 RPM Jumlah Posisi Pemrosesan Sekunder: 8 Jumlah Posisi yang Digerakkan pada Pemrosesan Sekunder: 4 Kecepatan Alat yang Digerakkan pada Pemrosesan Sekunder: 8.000 RPM Penampang Maksimum Penjepit Alat: 12 x 12 mm Berat: 1.750 kg