Mesin pembengkok bulat

Faccin 4HCI3530 PLATE ROLL

Tahun pembuatan: 2002, Kondisi: diremaj di bengkel (bekas), Beam cutting, drilling, and marking line CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial No.: 122,400 Weight without accessories: 10,980kg - Circular saw with downward cutting motion. Kodpfjhzbipex Ag Rjlp - Saw unit with gear system, drive system, and saw blade mounted on a heavy-duty, wear-resistant rotary bearing. - Heavy-duty saw gear with helical, hardened, and ground gearing operating in an oil bath. - Hydraulic saw blade feed, adjustable according to cutting chart, with very rapid return stroke. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic return stroke limitation. - Vertical clamping block with self-adjusting pressure plate. - Mitre cutting device for adjusting the angle from 45° left to 35° right. - Material sensor for automatic switch from rapid to working feed. - Hydraulically liftable feed roller for optimal material transport across the saw table. - Economical lubrication system with micro-dosing unit, particularly suitable for cutting profiles. - Chip collector installed on the machine frame. Specifications: - Saw blade housing: 100x4x30x250mm - Saw blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min - Saw feed rate: 0-400mm/min - Rapid return speed: 2,000mm/min - Total power: 25KW - Working height: 640mm Cutting Capacities: 90º Cuts - Angle steel: 250mm - U steel: 400mm - Double-T beam: 600mm - Wide flange beams: 1,008x302mm - Special wide flange beams: 1,000x450mm Mitre Cuts: IPBv beam - 75º: 1,008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478x307mm IPBs beam - 75º: 1,008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial No.: 122,401 Working Capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U steel (min - max): 80x45mm - 400x110mm - Double-T beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra wide flange beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis): 1 unit - Horizontal (Z and W axes): 2 units Drilling diameter: 8 - 40mm RPM: 150 - 1100 Rapid feed - Rapid return: 3,850mm/min - 8,000mm/min Drilling spindle feed: 0-500mm/min Rapid spindle positioning: 15,000mm/min Automatic tool changer: 5 tools per drilling unit. 3x5 units = 15 total tools Total power: 45KW MARKING UNIT FEED SYSTEM: - 26 meters infeed with beam feeder + 6 side arms for parallel beam feed to roller conveyors - 30 meters with roller conveyors for outfeed + 6 side arms - 4 side arms for small parts - The majority of rollers are powered - The total length required for infeed to outfeed is approximately 60 linear meters. *Please request machine installation layout drawings.

Kondisi: hampir baru (bekas), DATI DELLA MACCHINA Kodpfxod Tm D Eo Ag Rjlp TORNI TACCHI Modello FTC 51 DIMENSIONI GENERALI Distanza tra le punte: 4.000 mm Altezza: 1.550 mm Larghezza: 1.400 mm Lunghezza: 6.200 mm Peso: 10.000 Kg Diametro tornibile sul banco: 1.120 mm Diametro tornibile sul carro: 810 mm Diametro tornibile sull’incavo: 1.350 mm Foro mandrino: 123 mm Numero velocità: 18 Gamma velocità: 7-550 giri/min Potenza motore: 25 HP Attacco conico Morse N° 6 Filettature: metriche – pollici – modulo – passo Mandrino autocentrante 3 griffe: 450 mm Piatto: 850 mm Piatto supplementare: 1.420 mm In buone condizioni

Kondisi: bekas, Tahun pembuatan: 2008, 74ff6fcf-a8ee-4841-8be3-9b14f00c6ff6 Kledpfx Aew S Nn Hjg Rjp

Kondisi: bekas, Tahun pembuatan: 2007, Control system: Siemens Sinumerik 840 D Weight: 57,000 kg Operating voltage: 400 V Gleason-PFAUTER CNC Gear Hobbing Machine P 2400/2800 Designed for hobbing cylindrical and worm gears, as well as all other regularly occurring generatable profiles and shapes on cylindrical workpieces. Gleason’s large gear hobbing machines offer maximum productivity for roughing and finishing of cylindrical gears across various industries: wind turbines, industrial gearboxes, mining and shipbuilding, gear manufacturing, and many more. The drive power range takes future tooling developments into account. Naturally, the hob head drive is backlash-free. These machines are especially well-suited for the use of state-of-the-art cutting tool materials, regardless of whether dry or wet machining is preferred. The machine can be used for dry or wet machining and comes equipped with the corresponding chip conveyor for both processing methods. The machine is fitted with an internal profile milling head as a motorized milling head. --> Working area and technical data Workpiece nominal diameter: 2,400 mm Maximum hobbable diameter approx.: 2,800 mm Minimum/maximum center distance between cutter and workpiece axis: 100/1,200 mm Maximum axial slide travel (special version): 1,300 mm Maximum clampable cutter (internal milling head): Maximum diameter: 440 mm Maximum cutter width: 90 mm Internal profile milling head swivel range/vertical axis: +/- 15° Cutter arbour taper: HSK-B160 Maximum cutter traverse: 300 mm Table diameter: 2,500 mm Dividing wheel diameter: 2,200 mm Table bore: Diameter: 800 mm Depth: 875 mm Maximum table load approx.: 40,000 kg Maximum feed and rapid traverse rates: Axial (Z-axis): 4,000 mm/min Radial (X-axis): 3,000 mm/min Tangential (Y-axis): 3,000 mm/min Cutter cooling lubrication unit/Electric centrifugal pump: approx. 150 l/min Chip conveyor discharge height (raised): 1,600 mm Raised main column: 1,300 mm axial slide travel Internal profile milling head as motorized milling head instead of standard motor milling head Kledpfjwzyp Iex Ag Rsp Maximum hobbing depth in steel with approx. 600 N/mm² tensile strength: approx. 65 mm Stepless cutter speed: 50 – 150 rpm Maximum cutter diameter: 440 mm Minimum cutter root diameter: 310 mm Maximum cutter width: 90 mm Minimum internal diameter at 0° helix angle: 800 mm+ Maximum workpiece height at 0° helix angle: 600 mm Maximum workpiece ring thickness (incl. clamping fixture): 500 mm

Kondisi: baru, Tahun pembuatan: 2026, - Capacity: 1.2 mm - Expansion: 250 mm - With 8 sets of rollers Kledogg Nrkspfx Ag Rjp

Kondisi: bekas, Hydraulic Guillotine Shear STEINER Type HTS 30/20 R Machine No. 315 Year of Manufacture: 1982 Cutting length: 3050 mm Cutting thickness: 20 mm Backgauge: 800 mm, CNC-controlled Motor power: approx. 30 kW Power supply: 400 Volt, 50 Hz - Backgauge with ELGO positioning control - Backgauge adjustment via ball screw spindles - SICK safety light curtain at the front for operator protection - 3 material support arms with ball rollers - Electric foot switch - Spare blade - Oil cooler with air heat exchanger - Very robust machine in extremely solid design Footprint of base machine (L x W x H): 4650 x 2610 x 3200 mm Weight of base machine: 27,000 kg Transport dimensions (base machine): 4650 x 2610 x 3200 mm Transport dimensions (additional): 3500 x 2450 x 1400 mm Total weight: 27,000 kg Good condition Machine can be inspected in storage at 37235 Hessisch Lichtenau, trial cuts possible. Klsdjd Hxx Aopfx Ag Rop Currently, the hold-downs are being resealed, so a corresponding price adjustment will take place in the next few days.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1991, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.500 mm, jarak lintasan sumbu Y: 2.000 mm, jarak gerak sumbu Z: 1.250 mm, beban meja: 12.000 kg, diameter spindel: 130 mm, kecepatan spindel (maks.): 1.000 rpm, panjang meja: 1.800 mm, lebar meja: 1.600 mm, Heidenheim TNC 355 Klsdpfjyf Uc Ajx Ag Rep

Kondisi: bekas, Tahun pembuatan: 2004, max. diameter pemrosesan 610 mm max. panjang pemrosesan 1.522 mm Perjalanan - x 740 mm Perjalanan - y 410 mm Ksdpfx Agsx Avr Se Rjlp Perjalanan - z 1.838 mm Kontrol MAZATROL Fusion 640M Pro Sumbu-b 240 ° Sumbu-c 360 ° Kecepatan spindle 4.000 rpm Diameter lubang spindle 88 mm Kecepatan spindle milling 12.000 rpm Jumlah tempat tool changer 80 Pusat CNC bubut dan milling | MAZAK - INTEGREX E-410H Mesin dalam kondisi terawat. Video mesin di lokasi pabrik dapat kami bagikan sesuai permintaan.

Kondisi: baik (bekas), Tahun pembuatan: 2000, 1 used 4-roll plate bending machine Manufacturer: Stöting Model: VB 322 Serial Number: 1591 Kedov Ibkbspfx Ag Rolp Year of manufacture: 2000 with Acon control system Working length: 1000 mm Max. sheet thickness: 12 mm Pre-bending capacity: 8 mm Top roll diameter: 250 mm Bottom roll diameter: 210 mm Side roll diameter: 169 mm Dimensions (L): 3200 mm (W): 1370 mm Height (without support arm): 1370 mm Drive power: 6.5 kW Weight: 3.2 t

Kondisi: bekas, Tahun pembuatan: 1970, Pressure: 63 t Throat depth: 250 mm Stroke: 8–100 mm Table depth: 710 mm Table width: 500 mm Ram dimensions: 450 x 280 mm Ram adjustment: 63 mm Stroke rate: 140 strokes/min Kljdpfx Ascxxx Hog Rsp Total power requirement: 7 kW Machine weight approx.: 3.5 t