FAMUP MMV1600/65

FAMUP MMV 160/65

Kondisi: baik (bekas), Tahun pembuatan: 2000, jam operasional: 10.000 h, Fungsionalitas: berfungsi sepenuhnya, panjang pembubutan: 1.105 mm, diameter pembubutan: 610 mm, kecepatan spindel (maks.): 3.500 rpm, lubang spindel: 70 mm, jarak pergerakan sumbu X: 580 mm, jarak lintasan sumbu Y: 210 mm, jarak gerak sumbu Z: 1.137 mm, diameter pemasangan: 63 mm, kecepatan rotasi (maks.): 6.000 rpm, jenis arus masuk: AC (pendingin udara), Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, The machine is in good condition. Major maintenance work carried out in recent years: 30.04.2020 Spindle overhaul CHF 35,000 16.07.2021 Software update (Wenk AG) CHF 1,600 20.06.2022 Central lubrication pump replaced CHF 400 (All prices quoted in CHF) Known defects: · Error message during startup · Coolant leaks at the rear of the milling spindle during internal cooling · Overload warning when machine is cold and at 100% rapid traverse · Over 150 assorted tool holders included · Spare tool magazine bushings · Spare limit switches for tool changer position monitoring · 2 pcs. 3-jaw chucks, diameter 250 mm (mounted for inspection) · 1 pc. 3-jaw chuck, diameter 250 mm · 1 pc. 3-jaw chuck, diameter 300 mm · 1 pc. 4-jaw chuck, diameter 400 mm · 2 sets of hard jaws for external clamping, short version · 1 set of hard jaws for external clamping, long version · Various used sets of soft jaws · Replacement filters for Kowap high-pressure unit (5 in stock, approx. 2 at delivery – each filter approx. CHF 20–25) · Coolant cleaning unit or oil separator (custom-built) Iaodpoxp Hmasfx Aa Nsl · Cabinet adapted to fit the tool magazine for KM63 holders, numbered with 80 slots · Specific clamping accessories suitable for KM63 holders, featuring direct indexable insert clamping · Iscar disc milling cutter suitable for one holder, D160mm width 4mm · Gear milling cutter suitable for one holder (custom-built – for soft jaws, p=1.5mm) · Cleaning/deburring brush suitable for one holder We are happy to provide you with leasing and financing options for this machine. An inspection appointment can be arranged by request.

Kondisi: baik (bekas), Tahun pembuatan: 2006, jam operasional: 119.571 h, jarak pergerakan sumbu X: 650 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 500 mm, gerak cepat sumbu X: 45.000 m/menit, pergeseran cepat sumbu Y: 45.000 m/menit, pergerakan cepat sumbu Z: 45.000 m/menit, model controller: Siemens 840 D, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, hermle-c30u-en Isdpsxcp Srsfx Aa Njal

Tahun pembuatan: 1999, Kondisi: siap digunakan (bekas), Translation into English: Isdpfx Aaevnd Sue Noal Travel range X/Y/Z: 1050mm/800mm/880mm, B-axis: 360°, table dimensions X/Y: 630mm/630mm, number of pallets: 2, max. workpiece weight: 1500kg, spindle speed: 7000rpm, tool holder: SK50, power: 30kW, tool stations: 80, max. tool diameter: 135mm/260mm, max. tool weight: 30kg, rapid traverse: 40m/min. Machine dimensions X/Y/Z: approx. 6400mm/2600mm/3200mm, weight: approx. 19700kg, control: Mazatrol 640M PC-Fusion-CNC. Including 2-pallet changer for 630mm/630mm pallets. Documentation available. An on-site inspection is possible.

Tahun pembuatan: 1990, Kondisi: baik (bekas), nomor mesin/kendaraan: 92041, Table clamping surface: 410 x 900 mm Travel (X/Y/Z): 560 / 410 / 380 mm Spindle taper: SK 40 Spindle speeds: 22 - 6000 rpm Feed rates: X and Z up to 10,000 mm/min, Y up to 240 mm/min Required floor space: 2,600 x 2,000 x 2,300 mm Weight: 3,500 kg Iedpfedhhprjx Aa Njal

Kondisi: bekas, Tahun pembuatan: 2004, en-GB_001 Iasdpfotzyx Tox Aa Nsl

Kondisi: bekas, Tahun pembuatan: 2008, Vertical Turning and Grinding Center Manufacturer: EMAG Model: VSC 250 DS Year of manufacture: 2008 Control system: SIEMENS 840D Grinding spindle speed: 30,000 rpm Turning spindle speed: 3,000 rpm Turret tool stations: 12 Chiller unit for spindle and machine bed cooling Coolant lifting station (no independent coolant supply) Chip conveyor Parts handling Isdpfjia Rtdjx Aa Nsal Air through spindle Two clamping circuits through spindle (air and oil) Please note: The grinding spindle is defective but can be overhauled at a spindle repair facility. Apart from that, the machine is in very good condition and fully functional. Please contact us for further information and pictures via mail(at) or *

Kondisi: baik (bekas), Tahun pembuatan: 1988, Ibkanx9 Iedpsxmb Adjfx Aa Neal

Kondisi: bekas, Tahun pembuatan: 2001, en-001 Iaedpforw Dknox Aa Nsl

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, jarak pergerakan sumbu X: 2.600 mm, jarak lintasan sumbu Y: 700 mm, jarak gerak sumbu Z: 700 mm, gerak cepat sumbu X: 40.000 m/menit, pergeseran cepat sumbu Y: 40.000 m/menit, pergerakan cepat sumbu Z: 40.000 m/menit, lebar meja: 750 mm, panjang meja: 2.900 mm, beban meja: 2.150 kg, 5-axis machining center DMG MORI - DMF 260-7 X-axis travel: 2,600 mm Y-axis travel: 700 mm Z-axis travel: 700 mm A-axis: 360,000° B-axis: -110° to +110° Table length: 2,900 mm Table width: 750 mm Table load capacity: 2,150 kg Table diameter Ø: 750 mm Feed rate X-axis: 40,000 mm/min Feed rate Y-axis: 40,000 mm/min Iaodpfx Aasxuqv Ao Nel Feed rate Z-axis: 40,000 mm/min Tool holder: 40 ISO/BT/MK Spindle power: 35 kW Spindle speed: 18,000 rpm Tool changer: 30 positions Internal coolant supply (IKZ): 20 bar Number of controlled axes: 5 Chip conveyor: Yes Cooling unit: Yes Length: 8,400 mm Width: 3,423 mm Height: 2,620 mm Weight: 16,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Therefore, they do not constitute representations or contractual terms. We recommend verifying all important details.

Kondisi: bekas, Tahun pembuatan: 2000, X-axis travel 3,700 mm y-axis travel 3,050 mm z-axis travel 1,000 mm Control HEIDENHAIN TNC-430 PA Distance between columns 2,300 mm Spindle nose to table 1,175 mm Rapid traverse x/y/z 25,000 mm/min Feed rate 15,000 mm/min Tool holder ISO-50 - DIN 69871 Table load capacity 20,000 kg Spindle motor 37 kW Milling head - swiveling + / - 45° Milling head B axis 360,000 positions Tool changer 30 stations/tools Chip conveyor included Internal coolant supply 20 bar Table size 4,000 x 1,800 mm Machine weight approx. 42 t Iajdpswg Hrgofx Aa Nol KPU-4000 AR