Robot industri

FANUC P-250iA

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2008, The wrist joint is used and has been overhauled. Two units are available. Godpjihb Axofx Aabeua

Tahun pembuatan: 2006, Kondisi: siap digunakan (bekas), A welding cell, including robot and welding unit, is available. Table dimensions X/Y: 1800mm/900mm, maximum workpiece height: 800mm, switching hours: 5250h, operating hours: 1244h. 1) Robot: Fanuc ARC Mate 100iBe, year of manufacture: 2006, payload: 6kg, maximum reach: 1373mm, repeatability: +/-0.08mm, weight: approx. 238kg. 2) Welding unit: Fronius Magic Wave 4000, year of manufacture: 2006. On-site inspection is possible. Godpfsviv Dlsx Aabjua

Kondisi: hampir baru (bekas), Tahun pembuatan: 2006, jam operasional: 39.475 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 80022, berat keseluruhan: 520 kg, kapasitas angkut: 15 kg, jangkauan lengan: 2.800 mm, rentang pivot: 320 °, produsen pengendali: FANUC, model controller: RJ3iC, produsen teach pendant: FANUC, lebar kabinet kontrol: 800 mm, tinggi kabinet kontrol: 1.360 mm, tegangan masuk: 400 V, arus masuk: 20 A, jenis arus masuk: AC (pendingin udara), akurasi pengulangan: 2 mm, This is a painting robot from Fanuc. It was previously used at BMW for clear coat application on luxury car bodies and has accumulated approximately 40,000 operating hours. At BMW, the robots operated on a rail system, which is why the controller is equipped with a large additional amplifier. The second auxiliary amplifier is intended for controlling shoulder-mounted motors for gear pumps; however, these motors are not installed. The rail motor can be connected directly to the robot. The cable length between the robot and the controller is 10m and features a plug-in connection at the controller, which is a distinctive feature. We can assist with both transportation and installation. The robot is secured together with the controller on a special pallet measuring 2500x800x1600mm and is ready for transport. Currently, it is configured as a left-arm and left-handed unit. It is equipped with line tracking functionality, but this configuration can be easily changed without any mechanical modifications. The unit remains at our customer’s location but can be powered up and demonstrated at Paintrobotics upon serious inquiry. Gusdpfx Aaetu H Hcjboa We have two units available. If necessary, we can arrange to transport the unit from Frankfurt to our location.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2007, jam operasional: 92 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 82351, berat keseluruhan: 520 kg, kapasitas angkut: 15 kg, jangkauan lengan: 2.800 mm, rentang pivot: 320 °, produsen pengendali: FANUC, model controller: RJ3iC, produsen teach pendant: FANUC, lebar kabinet kontrol: 800 mm, tinggi kabinet kontrol: 1.360 mm, tegangan masuk: 400 V, arus masuk: 20 A, jenis arus masuk: AC (pendingin udara), akurasi pengulangan: 2 mm, This is a paint robot from Fanuc featuring a very unique equipment package. It was originally intended as a replacement robot at BMW for clear coat application on luxury vehicles. It has never been used and is therefore in like-new condition. The robots at BMW operated on a linear rail. As a result, the controller is equipped with a large additional amplifier, which comes with the corresponding motor included. The motor can be connected directly to the robot, allowing direct mounting onto the carriage. Another special feature: a motor is integrated in the shoulder joint to control a gear pump, enabling precise dosing directly on the robot. The cable length between the robot and the controller is 2 x 10 meters, and is pluggable at the controller. This means you have a 10 m cable routed, e.g., through an energy chain along a rail, and then another plug-in 10 m to the controller—another notable feature. We provide a 1-year commissioning warranty. We can assist with transportation and installation. The robot is secured together with the controller, ready for transport, on a special pallet (2500 x 800 x 1600 mm). Guodetu H Avopfx Aabsa Currently, the robot is configured as a right-arm, right-handed model, but this can be easily changed without any mechanical modification. The unit is still at our customer’s site, but can be viewed under power at Paintrobotics if there is serious interest. For this, we would bring the unit from Frankfurt to our facilities.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2007, Fanuc R2000iB/210F, diskon 20% untuk pemesanan lebih dari 1 robot. PERKEMBANGAN GSG ROBOTICS Gsdpfx Aaexq Tu Hebsua GSG Robotics GmbH, didirikan pada tahun 2005 di Gütersloh, sejak 2015 telah berbasis di Marl dengan area layanan luas untuk perawatan dan perbaikan robot. Selama bertahun-tahun, kami telah berkembang menjadi mitra holistik dalam semua hal yang berkaitan dengan robot industri dan teknologi otomasi. Kami adalah penyedia layanan penuh untuk dua produsen robot terkemuka, ABB dan Fanuc.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2011, jam operasional: 2.509 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 111313, berat keseluruhan: 520 kg, kapasitas angkut: 15 kg, jangkauan lengan: 2.800 mm, rentang pivot: 320 °, produsen pengendali: FANUC, model controller: R-30iA, produsen teach pendant: FANUC, lebar kabinet kontrol: 800 mm, tinggi kabinet kontrol: 1.360 mm, tegangan masuk: 400 V, arus masuk: 20 A, jenis arus masuk: AC (pendingin udara), akurasi pengulangan: 2 mm, This is a paint robot from Fanuc, featuring a unique configuration. It was originally intended for painting wind turbine blades and was installed on a 60-meter-long rail system, which included an additional rail allowing the robot to move vertically. For this reason, the controller is equipped with two large additional amplifiers, and the encoder brake module is also installed twice. Another special feature of this robot is that motors are built into the shoulder to drive two gear pumps, enabling effortless two-component mixing directly on the robot. The robot was never truly put into operation; the logged operating hours only accumulated because the robot was powered on, as confirmed by the plant operators (Enercon). The actual servo ON time is only 0.2 hours. The robot shows minor signs of soiling but is practically in mint condition. Guedpotu Hpqsfx Aabja Unfortunately, the teach pendant and teach cable are heavily soiled, but these could be replaced if necessary. The cable length between the robot and controller is 5 meters and is pluggable at the controller, which is another special feature. We offer a one-year commissioning warranty. We can assist with transport and installation if required. The robot is securely mounted on a special pallet (dimensions 2500 x 800 x 1600 mm) together with the controller, ready for transport. We have two units available; the price is for one robot. Currently, the robot is configured as right-arm, right-handed, but this can easily be changed without mechanical modification. The device can be viewed under power at Paintrobotics.