Crane yang terpasang pada truk

Fassi F65A.21, 5,4m-1160kg

Kondisi: bekas, Tahun pembuatan: 2014, Drive power: 3 kW Operating pressure: 7 bar Air delivery / l Weight: 286 kg Chicago Pneumatic CPVR15 CE Screw Compressor – Year of manufacture: 2014 The CPVR15 CE impresses with its robust construction, long service life, and low operating costs. Whether in workshops, craft businesses, or industrial applications – this compressor provides reliable compressed air supply. Drive power: 3 kW Todpfx Aaoh A Sfdjtef Operating pressure: 7 bar Air flow: up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Dimensions: approx. 965 mm (L) × 620 mm (W) × 1,040 mm (H) Operating noise: approx. 50–58 dB(A) Voltage/Frequency: 415 V / 50 Hz Application: Workshops, craft businesses, industrial applications with medium compressed air demand Scope of delivery: 1x Compressor – Chicago Pneumatic CPVR15 CE 1x Refrigeration dryer – OMI ESD 108 – 0.70 kW 1x Beko Öwamat 2 – oil-water separator Technical data taken from publicly available sources.

Tahun pembuatan: 2006, Kondisi: baik (bekas), Generator, emergency power generator, power unit, genset, power generator, standby generator - Soundproofed - Output: 7.0 kVA, 50 Hz - Petrol engine: Honda - 2x Schuko 230 Volt outlets Tjdpfjcgan Aex Aatof - 1x industrial socket 380 Volt - 1x charging cable socket 12 Volt - Unit dimensions: 590/780/H750 mm - Weight: 136 kg

Kondisi: siap digunakan (bekas), The machine has been overhauled and is fully operational, complete with documentation. Todpjfw Az Uefx Aatsf

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2001, jam operasional: 4.580 h, Load capacity at 500 mm load centre: 2 t 2-stage mast Lift height: 2900 mm Fork length: 1600 mm Fork width manually adjustable: 850 mm 4 wheels, superelastic tyres Own weight: 3.25 t Overall dimensions without forks: 2350 x 1070 x 2070 mm Tsdsv Uzcdepfx Aatof

Kondisi: baru, Sheet thickness: 1.6 mm Tedpfx Ajftd Uasatof Pressing force: 4 t Blade length: 156 mm Angle adjustable: from fixed to fixed degrees Table area: 450 mm x 305 mm Total power requirement: manual operation Machine weight: approx. 95 kg Dimensions (L x W x H): 530 x 380 x 480 mm

Kondisi: bekas, jarak tempuh: 175.000 km, daya: 74 kW (100,61 hp), jenis bahan bakar: diesel, tipe perpindahan gigi: mekanis, berat keseluruhan: 2.370 kg, pendaftaran pertama: 06/2013, inspeksi berikutnya (TÜV): 01/2026, kelas emisi: Euro 5, warna: biru, jumlah tempat duduk: 2, Perlengkapan: ABS, kunci sentral, mengalami kecelakaan, pendingin udara,

Kondisi: bekas, jarak tempuh: 304.000 km, berat keseluruhan: 11.990 kg, Tahun pembuatan: 2006, Perlengkapan: derek, kunci diferensial,

Kondisi: baik (bekas), de-HAFFNER – DGS 187 – Doppelgehrungssäge mit Schwenkaggregaten für das Schneiden von Holz, Aluminium, PVC und verschiedensten Materialien – CE-Ausführung Technische Daten: Sägeblattdurchmesser: 500 mm (Aufnahmebohrung 30 mm) Anzahl der Motoren: 2 Stück, jeweils 2,2 kW – 2800 U/min Maximale Schnittlänge: 3400 mm Minimale Schnittlänge: 230 mm Sägeblattneigung: 45°–90° Elektronische Positionierung der Schnittlänge des linken Schneidaggregats Hydropneumatischer Sägeblattvorschub Todpfxsuiwqhe Aatsf Pneumatische Werkstückspannung Bedienpult mit Doppel-Taster Elektronischer Positionsgeber für Aggregatverstellung 2 Absaugstutzen, Durchmesser 120 mm Betriebsdruck: 6 bar Maschinenabmessungen (LxBxH): 4600 x 1300 x 1650 mm Gewicht: 550 kg

Kondisi: baik (bekas), Tahun pembuatan: 1997, RAPID DGS 200 Double Mitre Saw Year of manufacture: 1997 Drive: 2 x 2.2 kW, 400 V Swivel range: manual, 45° to 90° Tjdpfxehctt Es Aatof Saw blade diameter: 420 mm Saw feed: pneumatic Cutting length: 4000 mm Profile clamping: 2 horizontal clamping cylinders 2 vertical clamping cylinders Length adjustment: manual Digital length display Air pressure: 7 bar Profile support: fixed exterior and movable center support Dimensions (L/W/H): 5200/1200/1500 mm Weight: 800 kg

Tahun pembuatan: 2023, Kondisi: baru, PLASMA CUTTER PLOTTER MODEL MTX 2040 Construction: steel + aluminum Working area: 4000/2000/200 mm XY axis drive: dual-sided gantry drive with 4Nm stepper motors and gear racks Z axis drive: stepper motor with ball screw Travel speed: up to 25 m/min Z axis control system: THC My plasm system Linear guides: TBI Cable carrier: IGUS Automatic material sensing system Power supply: 240V Maximum load: 2000 kg Net weight: 800 kg USB port for importing projects and transferring files via external USB drives Sheet detection system Cutting height control system: THC TBI Linear Guides Dual-sided Gantry Drive: X axis: stepper motor and gear racks Y axis: stepper motor and gear racks Z axis: stepper motor and ball screw All drives mounted on TBI HGR 20 rails Table equipped with water bed (water table ensures cleaner cuts, material cooling, and reduced gas emission during processing) INCLUDED: - Water table - Removable grate - Control software in Polish - CE declaration of conformity - Technical documentation (DTR) - Warranty - Commissioning and training included in the price Latest control system available in our plotters: - Integrated THC height controller - Torch anti-dive function - Accepted file types: DXF, PLT (HPGL), G-codes (.tap) - Integrated CAM module: MyMini CAM - Automatic recognition of internal/external objects - Advanced toolpath anticipation - Cutting parameter database - Project angle correction to material orientation - Possibility to start cutting from any point - Option to cut from the end - Import of DXF, PLT, or G-CODES - Automatic path generation with offset, lead-in and lead-out - Ability to work with external CAM software - Separate speed settings for holes - Parameter database - Correction of project angle to material placement - Software and hardware limits - THC anti-dive functions - Game pad control support - Material detection system with touch probe and floating head WHY CHOOSE US WE ARE A POLISH MANUFACTURER OF PLASMA CUTTING MACHINES CLOSE COOPERATION WITH PROMA-ELEKTRONIKA (THC MANUFACTURER) Tedpfjiphrljx Aatsf PROFESSIONAL HIWIN GUIDES—FEATURES INCLUDE VERY LONG LIFESPAN, HIGH CUT QUALITY WITHOUT NEED FOR FURTHER PROCESSING COMPONENTS SUCH AS REDUCTIONS, MOUNTINGS, HOLDING BRACKETS ETC. ARE MADE IN-HOUSE USING CNC TECHNOLOGY, ENSURING HIGH QUALITY AND REPETITIVENESS OUR STRENGTHS: - HIGH-END SHIELDED CABLES - INDUCTIVE SENSORS ON ALL AXES—DUST AND JAM RESISTANT - ADVANCED MY PLASM THC SYSTEM FOR SMOOTH TORCH OPERATION - CPC INTERFACE (VOLTAGE DIVIDER SEPARATOR) FOR PLASMA CUTTERS - WE INSTALL CUSTOMER-SUPPLIED CUTTERS OR ADVISE ON CUTTER PURCHASES TO MEET CLIENT REQUIREMENTS - ASSISTANCE WITH LEASING PROCESSES We can provide a plasma cutter tailored to your business’s specific needs. Other table sizes available in our range.