Mesin penekuk plat logam

FASTI 1000 x 4 mm

Kondisi: seperti baru (mesin pameran), Mesin las MIG/MAG dengan teknologi inverter Catu daya tiga fase, mesin las - Termasuk Master Software TERRA PME Data Teknis Fjdpjw Rm Sajfx Alyopk Catu Daya Tegangan (50/60 Hz): 3x400 ±15% Daya masukan maksimum: 22,9 kVA Arus masukan maksimum: 31,1 A Faktor daya PF: 0,73 Efisiensi: 89% Sekering lambat: 25 A Tegangan tanpa beban: 61V DC Kelas perlindungan IP: IP23S Kelas isolasi: H Kabel daya: 4x3mm2 - 5 m Pengelasan Rentang pengaturan: 3-400A Siklus kerja MIG/MAG - 40 °C: 40% - 400A, 100% - 330A Siklus kerja MIG/MAG - 25 °C: 100% - 400A Diameter kawat: 1,0-1,2 mm (opsi 0,6-1,6) Diameter kawat berinti: 0,9-2,4 mm Diameter kawat aluminium: 0,8-1,6 mm Kecepatan kawat: 0,5 - 22,0 m/menit Diameter gulungan kawat: Ø 200/300 mm Koneksi remote control: ya

Kondisi: baru, Tahun pembuatan: 2022, EN23070101 Fodpfx Alsmf T Hpeyopk

Kondisi: hampir baru (bekas), Rated load: 2,500 kN Fpjdpfx Alofpwmpsyek Threshold: Measurement starts at approx. 3% of rated load (approx. 75 kN) Resolution: 10 kN Measurement accuracy: +/-0.5% of maximum display (MD) Non-linearity: +/-0.3% MD Non-repeatability: +/-0.1% MD Temperature range: 0°C to 70°C Temperature effects On MD output: +/-0.001% MD/°C On zero-load output: no effect (automatic zero adjustment) Overload capacity: 50% of rated load (3,750 kN) Measurement speed: Three measurements per second Operating modes: Peak value or continuous measurement Strokes per minute: Single-stroke device, automatic zeroing on each stroke Power supply: Standard 9V block battery approx. 30 hours operating time in continuous use Device features a low battery indicator Dimensions: approx. 185 mm (L) x 200 mm (W), height approx. 127 mm Height (exact): 5.0000 +/-0.0002" Weight: approx. 13 kg, including carry case With analog output.

Kondisi: baru, Sheet width: 1270 mm Sheet thickness: 2.0 mm Frame width: 1300 mm Opening width: 48 mm Max. bending angle: 135° Total power requirement: manual operation Machine weight approx. 0.4 t Space requirements approx. 1.6 x 0.9 x 1.2 m Segment bending machine Fedpfxeupxcgj Alyopk Segment widths: 25, 35, 40, 50, 75, 100, 125, 150, 250 mm.

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2004, mobile circular saw for brick cutting with extraction Fpjdpfx Alov Ivx Tsysk

Kondisi: bekas, Hand-operated folding machine KRAMER Type AMS 650 x 1.5 Manual folding machine, bending bench Year of manufacture: approx. 1985 Working length: 650 mm Sheet thickness at 40 kg/mm²: 1.5 mm Upper beam opening: approx. 60 mm Bending beam adjustment: approx. 0-25 mm Bending angle: 0-180° - Upper beam adjustment via hand crank - Clamping rail for the bending beam - One-piece sharp rail 135° Space requirements (L x W x H): 1200 x 600 x 1100 mm Fpodpfx Asdzqaaslyok Weight: 160 kg Good condition

Kondisi: baru, Tahun pembuatan: 2025, New machine available for immediate delivery Capacity: 1520 x 2.25 mm, segmented upper beam rail -Tool storage compartment -Upper beam adjustment via left/right hand lever Fpedpfxeh S Uire Alyok

Kondisi: baru, Segmented finger brake with sectional upper beam PNEUMATIC CYLINDER!!! Maximum bending capacity over full working length ----- 1.5 mm Maximum working length ----- 1500 mm Maximum opening width ----- 48 mm Fpsdpfx Asga T Dlelysk Segment width (finger widths) ----- 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 200 | 2x 250 | 275 mm Maximum bending angle ----- 0 - 135° Weight ----- 430 kg Width ----- 1820 mm Depth ----- 850 mm Height ----- 1175 mm

Kondisi: sangat baik (bekas), Sheet width 1270 mm Sheet thickness 1.75 mm (steel) Sheet thickness 2.00 mm (aluminum) Sheet thickness 2.50 mm (plastic) Sheet thickness (stainless steel) 0.80 mm Frame width 1300 mm Opening width approx. 380 mm Working height 900 mm Lower beam adjustment 60.0 mm Max. bending angle 180° Weight approx. 200 kg Dimensions (LxWxH) 2000 x 520 x 1500 mm Good condition (!!) Bending bar, e.g. newly ground Equipment: - Robust, manual swing bending machine - Manual lifting mechanism via hand lever (incl. gas pressure damper) - Manual clamping of the upper beam via side handwheel - Manual adjustment of the lower beam - Bending angle stop with analog angle display - Upper beam with large opening width - Instructions / description Fpedpfx Aoxaa S Dslyok * Machine link: ?machineno=1008-9355182

Kondisi: bekas, Tahun pembuatan: 1992, Technical details: Sheet width: 1550 mm Sheet thickness: 2.5 mm Frame opening: 1630 mm Blade length: 1550 mm Stroke adjustment, upper beam: 90 mm manual / 70 mm hydraulic Stroke adjustment, lower beam/bending beam: 105 mm manual Stroke adjustment, bending beam: 40 mm Fpsdpfxsu Ib Ans Alyek Maximum bending angle: 93° (L-/Z-bending) and 180° (folding) Back gauge: no Total power requirement: 4.5 kW Machine weight approx.: 1.8 t Machine dimensions approx. (LxWxH): 2.6 x 1.1 x 1.7 m Hydraulic unit dimensions: 1400 x 700 x 1480 mm Bending capacity 2.5 mm at approx. 400 N/mm² strength Hydraulic unit OILTECH, approx. 200 liters