Pukulan baris

Fasti Stanze

Kondisi: baik (bekas), Press, punching machine, punching device, hole punching machine, gang punch, punching unit, multi-head punch, punching system, - Quantity: 5x presses Gedpfx Adob A I Ibotott - Maximum width: 1000 mm - Tool installed: 8x45 mm - Punch spacing: 187 mm - Drive: electric - Weight: 280 kg

Kondisi: baik (bekas), Tahun pembuatan: 2003, Main spindle: Speed range – main spindle: max. 6,000 rpm Drive power – main spindle: 16 kW Max. torque: 155 Nm C-axis: 360° Turret: Number of tool stations: 12 pos. Number of driven tool stations: 12 pos. Speed range – driven tools: max. 5,000 rpm Drive power – driven tools: 10 kW Tool holder: (VDI 30) Tool shank: 20 x 20 mm Travel distances: X-axis: 160 mm Z-axis: 450 mm Rapid traverse: Rapid traverse X: 60 m/min Rapid traverse Z: 45 m/min Feed force X: 2.5 kN Feed force Z: 4 kN Rapid traverse C: 200 rpm Max. torque C: 155 Nm Total power requirement Machine weight approx.: 3.7 t Space requirements approx.: 4.5 x 2.5 x 2.5 m Control: Heidenhain Gedjv Drigopfx Adtett Hollow clamping cylinder C-axis and tool drive Chip conveyor Oil and emulsion mist extractor with electrostatic filter

Kondisi: baru, Mesin Tekuk Horizontal Fastech FP 30 Deskripsi: • Tekanan: 30t • Langkah: 285mm • Tinggi alat maksimum: 250mm • Plat baja sisi tinggi: 200 x 18mm • Kecepatan kerja: 10,0mm/dtk • Kecepatan balik: 10,0mm/dtk • Tinggi kerja: 930mm • Meja: 660 x 1250mm • Kebutuhan daya total: 3,0kW • Motor: 400 Volt 50Hz • Berat: 850kg • Dimensi P-L-T: 1250 x 650 x 1250mm • Kapasitas oli: 40,0l Perlengkapan: • Mesin tekuk horizontal hidrolik • Area kerja kokoh dari baja stabilisasi • Mesin dari baja tempa yang dikeraskan dan diasah • Tampilan digital untuk pengaturan langkah • 1x set perkakas Gjdpfxsfg Eu Uo Adtott • Sakelar kaki ganda

Kondisi: baru, Tahun pembuatan: 2025, Pressure: 40 t Stroke: 250 mm Table size: 625 x 1100 mm Flat bar (flat): 200 x 20 mm Maximum pipe diameter: 2" Table height: 950 mm Working speed: 9.1 - 4.7 mm/sec Gtodpfx Aevx Dwredtjt Return speed: 45 mm/sec Machine weight: approx. 750 kg Space requirement: approx. 1.25 x 0.9 x 1 m Total power requirement: 3 kW Oil capacity: 45 l New hydraulic horizontal bending press with 4 advantages over other manufacturers: 1) Infinitely variable pressure adjustment UNDER LOAD with handwheels 2) UNDERSLUNG cylinder for 360° bending! 3) Operation from the front, not the side 4) Patented tapered tool holder Additionally, immersion depth and return point can be set by handwheel, along with stepless feed adjustment. Machines also available in the following sizes: press force from 22 to 150 t, stroke from 200 to 450 mm, also optionally with 2-axis control (immersion depth + side stop). A comprehensive range of tools for a wide variety of applications available on request. SIMASV bending presses have been quality machines since 1957.

Kondisi: baik (bekas), Tahun pembuatan: 2005, jarak pergerakan sumbu X: 780 mm, jarak lintasan sumbu Y: 560 mm, produsen pengendali: Heidenhain, model controller: Mill Plus, panjang meja: 700 mm, kecepatan spindel (maks.): 12.000 rpm, 60 tool stations. 2-fold pallet changer. IKZ – spindle with 12,000 rpm, 40 bar. Operating mode 4 for working with the door open. Blum laser for tool measurement and tool breakage control. Preparation for Blum 3D probe; probe not included in the scope of delivery. Gedpfsu S A Ansx Adtott

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, Siemens control Bar capacity 32 mm 2 x 12-station turrets with driven tools Gjdswh U Edepfx Adtjtt Main / counter spindle Y-axis on upper turret Parts catcher Chip conveyor IRCO bar feeder magazine

Kondisi: baik (bekas), Tahun pembuatan: 2007, jarak pergerakan sumbu X: 750 mm, jarak lintasan sumbu Y: 750 mm, jarak gerak sumbu Z: 725 mm, CNC control Sinumerik 840D NC rotary table, B-axis Magazine for 320 tools Pallet changer unit, 2 pallets 500 mm x 500 mm Internal coolant supply ICS (80 bar) Chip conveyor Gsdpfxoq Ui Hqo Adtett Coolant system Technical data: X-travel longitudinal: 750 mm Y-travel vertical: 750 mm Z-travel cross: 725 mm B-axis: 360° Spindle taper: HSK 63A Spindle speed range: 50–10,000 rpm Tool positions in changer: 320 Feed rate: 60,000 mm/min Rapid traverse: 60 m/min Spindle drive power 40/100% duty cycle: 37/24 kW Machine weight approx.: 15,000 kg Technical data, accessories and description of the machine are not binding.

Kondisi: baru, Ostas 3-Roll Plate Rolling Machine SMR-S 2070 x 190 Technical Specifications: Gtjdpfx Adjg Nz T Ietjt Special equipment included in the price: - Motorized adjustment of lower rolls - Hardened rolls - Motorized adjustment of rear roll - Digital display Sheet width: 2070 mm Max. sheet thickness: 7.0 mm Pre-bending thickness: 6.0 mm Roll length: 2070 mm Smallest bending diameter: 285 mm Roll diameter: 190 mm Weight: 3480 kg Dimensions (L x W x H): 3750 x 920 x 1260 mm Motor: 4 kW Features: - Top and bottom rolls electrically driven - Swing-out top roll - Cone bending device - Asymmetrical roll arrangement - Self-braking main motor - Separate control and operating console - Safety cable, CE-marked

Kondisi: sangat baik (bekas), machine-description-001 Gjdpfx Aowtqnredtott

Kondisi: bekas, Tahun pembuatan: 2012, X-axis travel 630 mm Y-axis travel 800 mm Z-axis travel 750 mm Control SIN 840D sl Siemens B-axis 360 x 0.001° A-axis -200 to +25 x 0.001° Spindle speed – infinitely variable 20 - 18,000 rpm Drive power 100% duty cycle 28.00 kW Drive power 40% duty cycle 34.00 kW Torque at 40% / 100% duty cycle 110 / 84 Nm Tool holder HSK 63 Feed rate X/Y/Z axis 1 - 100,000 mm/min Rapid traverse X/Y/Z 100.00 m/min Feed force X/Y/Z 9 / 6 / 9 kN Feed rate B axis 1 - 14,400°/min Feed rate A axis 1 - 7,200°/min Gtedpfx Aovxwxvsdtet Pallet size 2x 500 x 500 mm Max. workpiece weight 400 kg Max. workpiece diameter 800 mm Max. workpiece height 800 mm Tool magazine with 63 positions Max. tool diameter 280 mm Max. tool length 550 mm Max. tool weight 15.00 kg Total power requirement 65.00 kW Machine weight approx. 14.00 t Space required approx. 5.50 x 3.50 x H3.20 m 5-axis machining center with SIEMENS SINUMERIK 840D sl control, mechanical tool breakage monitoring, emulsion mist extractor. Machine was operated in a production line, therefore supplied without chip conveyor and without coolant system.