Semitrailer pemuat rendah

FAYMONVILLE MAX Trailer MAX100 Semi-Tieflader Hebebett

Extract from the equipment. Complete equipment on request.

Gooseneck
* with bevelled corners at the front approx. 45° and with rear bevel approx. 750 mm x 10°
* 3 pairs of lashing rings (LC 5,000 daN)
* Hardwood flooring approx. 30 mm thick

Loading area
* in extendable version with rear bevel approx. 1,000 mm x 8°
* Can be raised and lowered hydraulically after the gooseneck, length approx. 2,800 mm
* 6 pairs of lashing rings that can be folded outwards (LC 5,000 daN)
* 2 pairs of lashing rings that can be folded outwards (LC 10,000 daN)
* 1 pair of lashing rings that can be folded inwards on the central support at the front (LC 10,000 daN)
* Cutouts in the outer frame of the loading area for hanging tensioning straps (LC 2000 daN)
* Grating flooring C40/4 (point load approx. 2.3 t on an area of approx. 20 x 20 cm)
* Checkered sheet covering above the axles

Two-part steel ramps
* A pair of galvanized two-part steel ramps, approx. 2,750 + 1,400 x 800 mm, with grating covering C40/4 (point load approx. 2.2 t on an area of approx. 20 x 20 cm)
* Ramp with hydraulically foldable and unfoldable ramp sections
* Hydraulic lifting mechanism, hydraulically movable
* Maximum load per pair: approx. 40,000 kg
* In accordance with Regulation 1230/2012/EU, ramps with a length of less than 300 mm in the driving position do not have to be taken into account in the vehicle length of 16,500 mm

Kdslhccqsvzi E Hjron
Axles
* BPW axles and Suspension
* 2 axles rigid, 1 axle with self-steering
* Technical axle load: 12,000 kg each
* Electro-magnetic reversing lock can be activated via reverse gear and manually

Air suspension
* with lifting and lowering valve

Tires
* 235/75 R 17.5

Seat supports
* JOST seat supports (mechanical) with 2-speed gearbox for approx. 24 t lifting load (approx. 50 t test load)

Brake system
* in accordance with EU regulations with EBS-E (2S2M)
* without connecting lines to the tractor unit

Paintwork
* First-class and long-lasting corrosion protection of the standard shot-blasted welded frame guaranteed by a 2-component (2K) zinc dust primer
* A high-quality 2-component (2K) top coat in a single color in RAL 3002 carmine red
* Rear section metallized and painted in RAL 9010 (pure white)

Steel construction
* made of high-strength fine-grain steel
* Steel qualities: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa)

Electrical system
* in accordance with EU regulations

Lighting
* 24 volt ASPÖCK-NORDIK (ASS3)
* ASPÖCK-UNIBOX on the front connection panel with sockets 24N, 24S & 15-pin.
* Connection according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098

Accessories included
* 2 inch kingpin
* A galvanized steel bulkhead, approx. 400 mm high
* A spare wheel holder in front of the bulkhead
* Yellow-red air couplings on the galvanized connection strip at the front
* 4 brake shoes with holder on the bulkhead
* Galvanized folding supports under the slope of the loading area
* A bracket for a rotating beacon at the rear of the trailer
* Grating in the slope of the gooseneck C30/3 (point load approx. 2 t on an area of approx. 20 x 20 cm)
* Grating in the slope of the loading area C40/4 (point load approx. 3.4 t on an area of approx. 20 x 20 cm)
* Cover plates to bridge the free space between ramps and loading area
* A painted layer of sand on the checker plates, above the kingpin and the loading area as anti-slip protection
* Yellow reflective tape in accordance with EU regulations on the side and rear of the trailer
* Elec

Iklan itu diterjemahkan secara otomatis. Kesalahan penerjemahan mungkin saja terjadi.