Trailer low loader

FAYMONVILLE MAX Trailer MAX100 Semi-Tieflader Hebebett

You will find our complete vehicle inventory, including immediately and short-term available vehicles, on our website.

The following is an excerpt from the specification. Full specification available upon request.

Gooseneck:
- Gooseneck with beveled front corners approx. 45°, rear taper approx. 750 mm x 10°
- 3 pairs of lashing rings (LC 5,000 daN)
- Hardwood flooring approx. 30 mm thick

Loading Platform:
- Platform hydraulically liftable and lowerable after the gooseneck, approx. 2,800 mm long
- Rear taper approx. 1,000 mm x 8°
- 6 pairs of folding external lashing rings (LC 5,000 daN)
- 2 pairs of folding external lashing rings (LC 10,000 daN)
- 1 pair of internal folding lashing rings at the front center beam (LC 10,000 daN)
- Cutouts in the outer frame for attaching tie-down straps (LC 2,000 daN)
- Grating floor C40/4 (point load approx. 2.3 t on approx. 20 x 20 cm)
- Over axles checker plate covering

Two-piece steel ramps:
- One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm
- With gratings C40/4 (point load approx. 2.2 t on approx. 20 x 20 cm)
- Ramp with hydraulically foldable ramp sections
- Hydraulic lifting frame, hydraulically repositionable
- Max. load per pair: approx. 40,000 kg
- In accordance with Regulation 1230/2012/EU, ramps shorter than 300 mm do not have to be included in the vehicle length in driving position

Landing Gear:
- JOST landing gear

Axles:
- BPW axles and suspension
- 2 rigid axles, 1 self-steering trailing axle
- Technical axle load: 12,000 kg each
- Electromagnetic reverse lock activated by reverse gear and manual switch
- Air suspension with lifting and lowering valve
- Axle tool kit

Brake System:
- WABCO braking system in accordance with EU regulations, with EBS-E (2S2M), without connecting lines to the tractor unit

Tyres:
- 235/75 R 17.5 3PMSF tyres – make at our discretion
- TPMS tyre pressure monitoring system compliant with ECE R 141. Data transmission to the towing vehicle via standard EBS interface acc. to ISO 11992. To display the data correctly, the towing vehicle must be able to process and show this data.

Steel Construction:
- High-strength fine-grain steel construction
- Steel grades: S355J2+N / S355MC

Electrical System:
- Electrical system in accordance with EU requirements
- 24 volt lighting, ASPÖCK-NORDIK (ASS3)
- All LED side marker lights flash with the indicator
- ASPÖCK-UNIBOX at the front connector rail with 24N, 24S & 15-pin sockets

Paintwork:
- Complete steel structure is automatically shot-blasted after welding via turbine blasting machine
- Second round of blasting with corundum for optimum coating adhesion
- HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection
Fjdjw Tprnspfx Adqjpn
- Final coating with 2 layers of 2K topcoat, single color RAL 3002 carmine red
- Rims painted silver grey
- Rear section metallized and painted in RAL 9010 pure white
- Metallic paint not available
- Paint system tested in salt spray test according to ISO 9227-NSS
- Cavity sealing with special wax

Included accessories:
- 2 inch king pin
- One galvanized steel front wall, approx. 400 mm high
- Galvanized folding supports under the loading platform taper
- Rear mounting bracket for beacon light
- Grating covering in the gooseneck ramp taper C30/3 (point load approx. 2 t on ...

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.