Mesin bor dan frais

Fehlmann Picomax 54

Kondisi: sangat baik (bekas), Control: Heidenhain TNC 310 With indexing head Travelling distances X/Y/Z: 500/250/160 mm W-axis travel: 480 mm Clamping surface (L x W): 885 x 320 mm Permissible table load: 250 kg Distance table - spindle nose: 0 – 605 mm Feed rate X/Y: 1 – 2000 mm/min Feed rate Z: 1 – 1200 mm/min Tool quick-change system: SF 32 Crjdpfx Anowkrn Ijzog Stepless speed range: 9200 rpm Drive power: 5 kW Required space (W x D x H): 1850 x 2550 x 2400 mm

Kondisi: bekas, 3-axle truck trailer, low-bed trailer MÜLLER MITTELTAL type AZP Curtain-sided low-bed trailer, heavy-duty trailer, low-loader for machinery transport First registration: 2001 Total mileage: approx. 350,000 km Codpfx Ajt N Antsnzjrg Gross vehicle weight: 24,000 kg Unladen weight: 5,500 kg Payload: 18,500 kg Deck height: 840 mm Loading height under curtain frame: 3,200 mm Platform length: 7,450 mm Overall length: 9,150 mm Overall width: 2,550 mm Overall height: approx. 4,050 mm Axle load front: 8,000 kg Axle load middle: 8,000 kg Axle load rear: 8,000 kg Tyres: Michelin 215 / 75 R17.5 (135/133J XTE 2+ TL) - Rear wing doors at platform height - Curtain frame with EDSCHA roof system - Curtain frame easy to dismantle (can also be used with the curtain frame removed and the tarpaulin pushed forward) - Spare wheel mounted at front bulkhead - Separate lifting and lowering of front and rear axles - Middle axle designed as lift axle - Towing drawbar – telescopic, multi-stage extension - Extremely robust lashing eyes on the outer frame and in vehicle center - ALU loading ramps, length 268 cm, width 410 mm, height 130 mm (surcharge EUR 2,000 net) The trailer was purchased new by us and is from first ownership. The trailer has been de-registered since 2025.

Kondisi: sangat baik (bekas), HEIDENHAIN TNC-310 Crodjfrbtdopfx Anzjg Travel paths: 500 x 260 x 480 mm (+ quill 160 mm) Cross table: 880 x 320 mm With manual handwheels Spindle speeds: 100–9000 rpm Various accessories MARCELS MASCHINEN CH

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 14008455, Fehlmann model Picomax 54 Heidenhain TNC 320 dalam kondisi sangat baik Data teknis: - Tahun pembuatan: 2008 - Gerak sumbu X, Y, Z: 500/260/480 mm - Gerak pinola bor: 160 mm - Ukuran meja (P x L): 880 x 320 mm - Daya angkut meja yang diizinkan: 250 kg - Jarak meja ke hidung spindle: 0 - 605 mm - Kecepatan makan sumbu X/Y: 1 - 2000 mm/menit - Kecepatan makan sumbu Z: 1 - 1200 mm/menit - Sistem quick change tool SF 32 - Rentang kecepatan putar variabel: 7100 rpm - Dimensi mesin (L x P x T): 1850 x 2550 x 2400 mm - Berat: 2150 kg Aksesoris: - Heidenhain TNC 320 - Sumbu ke-4 dengan kontra center dan Rohm 140mm 3-jaw chuck - Berbagai holder - Mikroskop Crodpfx Aezgwiyenzsg - Probe Heidenhain - Lampu mesin - Sistem pendingin

Kondisi: sangat baik (bekas), Tahun pembuatan: 2024, Fungsionalitas: berfungsi sepenuhnya, tinggi total: 325 mm, lebar total: 185 mm, panjang total: 483 mm, berat keseluruhan: 16 kg, jenis pendinginan: air, sekring listrik: 16 A, arus pengelasan pada siklus tugas 100%: 175 A, arus pengelasan (min.): 5 A, arus pengelasan (maks.): 250 A, Perlengkapan: Pelat tipe tersedia, dokumentasi / manual, Set lengkap: Mesin las WIG LORCH T 250 DC Basic Plus dengan pendingin air WUK 7 dan aksesori Dijual sebuah mesin las industri profesional dari merek premium LORCH, tipe T 250 DC Basic Plus, yang dikombinasikan dengan unit pendingin sirkulasi air inovatif WUK 7. Sistem ini dirancang sebagai perangkat portabel serbaguna serta perangkat bengkel yang lengkap dan unggul dengan teknologi inverter mutakhir. Produsen: LORCH (Dibuat di Jerman) Model: T250 DC Basic Plus termasuk pendingin air WUK 7 opsional Kondisi: sangat baik, berfungsi penuh Lokasi penyimpanan: Graz _____ Isi pengiriman (Set Lengkap): • Mesin las inverter WIG LORCH T 250 DC Basic Plus • Unit pendingin sirkulasi air LORCH WUK 7 (koneksi langsung LorchNET) • Obor las WIG termasuk paket selang • Kabel arde • Unit perawatan untuk gas / regulator tekanan Harga baru sekitar 6000 € _____ Sorotan: • Solusi satu kabel inovatif: Berkat koneksi unit pendingin modern, seluruh sistem (inverter + pendingin air) hanya membutuhkan satu kabel daya. Catu daya dan kontrol cerdas yang disesuaikan untuk WUK 7 dilakukan langsung melalui bagian belakang sumber daya las. Tidak ada kabel yang berantakan saat pemasangan! • Teknologi inverter kelas atas: Kapasitas las penuh 250 A dengan desain yang ringkas. • Fungsi FastPuls (hingga 2 kHz): Sempurna untuk pengelasan lembaran tipis tanpa distorsi. • Mobilitas yang kuat: Unit dasar yang sangat ringan (hanya 16 kg), ideal untuk penggunaan berat dalam pembuatan kendaraan, bengkel, serta pembuatan tangki dan pipa. Crsdpfx Aeyxvwionzeg _____ Data teknis: • Rentang daya: 5 – 250 A • Siklus kerja (ED) pada 40°C: 60% = 200 A / 100% = 175 A • Tegangan jaringan: 400 V (sekring jaringan 16 A) • Kapasitas pendinginan (WUK 7): 0,53 kW • Berat: sekitar 16 kg • Dimensi inverter las Lorch T 250 DC: 483 x 185 x 325 mm (P x L x T) • Dimensi unit pendingin sirkulasi air Lorch WUK 7: 547 x 212 x 265 mm (P x L x T) _____ Perangkat ini dalam kondisi siap digunakan. Pemeriksaan dan uji coba dapat dilakukan setelah perjanjian.

Kondisi: sangat baik (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, panjang pemakanan sumbu X: 500 mm, panjang umpan sumbu Y: 250 mm, panjang umpan sumbu Z: 160 mm, jarak pergerakan sumbu X: 500 mm, jarak lintasan sumbu Y: 250 mm, jarak gerak sumbu Z: 480 mm, kecepatan spindel (maks.): 9.000 rpm, kecepatan pemakanan sumbu X: 2 m/menit, laju pemakanan gandar Y: 2 m/menit, laju pemakanan sumbu Z: 1 m/menit, kecepatan spindel (min.): 100 rpm, gores kuas bulu: 160 mm, lebar meja: 320 mm, panjang meja: 880 mm, X-500, Y-250, Z- quill travel 160 mm, W- machine head traverse 480 mm, table 880 x 320 mm, max. 320 kg, spindle taper SF 32, 100-9000 rpm, 5 kW, 60 Nm, Heidenhain TNC 124. Extensive accessories included. Crsdpfeq R Rb Hex Anzsg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, Fungsionalitas: berfungsi sepenuhnya, High-Precision Drilling and Milling Machine Fehlmann Model Picomax 54 Heidenhain TNC 310 Very good condition Credpfx Anjukf Ncjzsg Technical Specifications: >> Year of manufacture: 2001 >> Travel X/Y/Z: 500 / 250 / 160 mm >> W-axis travel: 480 mm >> Clamping surface (L x W): 885 x 320 mm >> Permissible table load: 250 kg >> Distance table to spindle nose: 0 – 605 mm >> Feed rate X/Y: 1 – 2000 mm/min >> Feed rate Z: 1 – 1200 mm/min >> Tool quick-change system: SF 32 >> Infinitely variable speed range: 9,200 rpm >> Drive power: 5 kW >> Required space (W x D x H): 1850 x 2550 x 2400 mm About the Machine: Offered here is a high-precision drilling and milling machine, Fehlmann model Picomax 54, in very good condition. It is equipped with a Heidenhain TNC 310 contouring control. Program creation is particularly straightforward thanks to the user-friendly Heidenhain plain language dialog. HEIDENHAIN TNC controls are workshop-oriented contouring controls that allow you to program conventional milling and drilling operations directly at the machine in easy-to-understand plain language dialog. At maximum spindle speeds, the machine runs very smoothly. Mechanically and electrically tested. Take the opportunity to inspect and test this machine under power at our facility.

Kondisi: baru, Tahun pembuatan: 2025, x-travel 580 mm y-travel 200 mm z-travel 340 mm Spindle speeds 115 - 1,750 rpm Table size 1000 x 240 mm Tool holder ISO 40 Total power requirement 4.5 kW Machine weight approx. 820 kg Space required approx. 1290 x 1090 x 2170 mm Universal precision drilling and milling machine for horizontal and vertical milling operations, equipped with DPA 31 Plus 3-axis digital position display Description: - Heavy, robust construction made from high-quality, vibration-absorbing cast iron - Oil-bath gearbox with ground, hardened gears Cjdpfxotv Riae Anzsrg - Coolant system - Halogen machine lamp with focused beam - Large, heavy-duty cross table, precisely ground surface with T-slots and adjustable gibs - Milling head tiltable ± 45° - Forward and reverse rotation - X-axis can be moved either by handwheel or via the table feed device - Automatic end stop for the X-axis - Height-adjustable safety screen with microswitch for protection against flying chips and parts, offering maximum operator safety Scope of delivery: - Keyed drill chuck 1 - 16 mm / B18 - Drill chuck arbor ISO40 / B18 - Horizontal milling spindle with counter bearing, disc cutter arbor Ø22 mm, Ø27 mm - Adapter ISO 40/MK3 - Adapter ISO 40/MK2 - Drawbar for vertical and horizontal operation - T-slot nuts - Drift - Operating tools

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, High-precision drilling and milling machine Fehlmann Model Picomax 54 with Heidenhain TNC 310 Very good condition Technical specifications: >> Year of manufacture: 2000 Machine no. 14000258 >> Travel X/Y/Z: 500 / 250 / 160 mm >> W-axis travel: 480 mm >> Clamping surface (L x W): 885 x 320 mm >> Permissible table load: 250 kg >> Distance table to spindle nose: 0 – 605 mm >> Feed rate X/Y: 1 – 2000 mm/min >> Feed rate Z: 1 – 1200 mm/min >> Tool quick-change system: SF 32 >> Infinitely variable speed range: 9200 rpm >> Drive power: 5 kW >> Required space (W x D x H): 1850 x 2550 x 2400 mm Accessories: >> Tool holders >> Heidenhain probe >> Operating manual, electrical diagrams, machine books Credeyu Snzepfx Anzjg About the machine: For sale is a high-precision drilling and milling machine Fehlmann model Picomax 54 in very good condition. It is equipped with a Heidenhain TNC 310 path control. Program creation is especially easy thanks to the user-friendly Heidenhain plain text dialog. HEIDENHAIN TNCs are workshop-friendly path controls that allow you to program conventional milling and drilling operations directly on the machine via an easy-to-understand plain text dialog. The machine runs very smoothly even at maximum spindle speeds. Mechanically and electrically tested. Take the opportunity to inspect and test the machine under power on site.

Tahun pembuatan: 1972, Kondisi: siap digunakan (bekas), Spindel-Tischabstand min./max.: 81mm/481mm, Gegenhalter-Spindelmittenabstand: 195mm, Spindelkopfschwenkung: 360°, Frässpindeldurchmesser: 70mm, Spindelverstellung: 100mm, Spindelstockverstellung: 300mm, Tischdimensionen X/Y: 480mm/820mm, Verfahrweg X/Y/Z: 500mm/200mm/400mm, max. Werkstücklänge: 400mm, Spindeldrehzahl: 1600U/min, Vorschub X/Y: 500mm/min, Vorschub Z: 250mm/min, Spindelkopfschwenkung: +/-30°, Maschinendimensionen X/Y/Z: ca. 1600mm/2550mm/1700mm, Gewicht: ca. 2300kg. Die Maschine wurde Ende 2025 elektrisch geprüft und ein Defekt des Notschalters wurde entdeckt. Dokumentation vorhanden. Eine Besichtigung vor Ort ist möglich. Csdpfjx S Rcmjx Anzerg