Mesin Stamping Dingin 2-Tembakan - 14x200

FIDE EF-180

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1970, Fungsionalitas: berfungsi sepenuhnya, de-DE Fsdeulf D Njpfx Anlogg

Kondisi: bekas, LOSER chamfering machine / dowel trimmer model AA220 - USED Fgedeqpdkcjpfx Anljg - Capacity: 7500/1500 dowels per hour - Dowel diameter capacity: 6-18 mm.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1970, Fungsionalitas: berfungsi sepenuhnya, panjang poros di bawah kepala: 30 mm, panjang bagian (maks.): 52 mm, Hilgeland CH1 KHA Double-Action Press Year of manufacture: 1970 The machine is ready for immediate use! Fgedpfx Anjur N Daslog

Tahun pembuatan: 1988, Kondisi: baik (bekas), Carlo Salvi, modelo 780/SV, cabezal de una matriz y dos golpes. Diámetro máximo de corte: 6,35 mm. Longitud máxima de corte: 97 mm. Longitud máxima de expulsión (lado de la matriz): 80 mm. Velocidad máxima: 360 piezas por minuto. Fedpfx Anehrdmxslogg

Kondisi: bekas, Tahun pembuatan: 1979, Cylindrical grinding machine SKF with internal grinding attachment, hydraulic Fjdpfogt Ea Rox Anljgg

Kondisi: bekas, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Max. rolling force: 24 tons Max. tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Max. holding/tool length: 180 mm Max. workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Power supply: 400 Volt, 50 Hz, 10 kW - Swiveling roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox - Hydraulic system integrated in machine base - Operating manual with electrical schematic Space required (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Fgedpfjuz If Nsx Anleg Plunge Rolling: The thread rolling dies with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The maximum thread length corresponds to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the die width. Through-feed dies have three sections - the lead-in, the calibration zone, and the lead-out. Groove rolls have no pitch and are swiveled according to the thread pitch angle to be rolled. Pitch rolls differ from groove rolls by having a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2021, jam operasional: 435 h, tinggi total: 1.065 mm, lebar total: 645 mm, berat keseluruhan: 114 kg, jarak pergerakan sumbu X: 165 mm, panjang produk (maks.): 685 mm, jumlah sumbu: 3, Plastic 3D Printer, manufactured in 2021. This FORMLABS Fuse 1 features a build volume of 165 x 165 x 300 mm and a hopper capacity of 8.5 kg for PA12 nylon. It operates with a ytterbium fiber laser and can produce parts up to a maximum size of 15.9 x 15.9 x 29.5 cm. If you are looking for high-quality 3D printing capabilities, you should consider the FORMLABS Fuse 1 machine we have for sale. Contact us for further details. Formlabs Fuse 1 • Build volume: 165 x 165 x 300 mm (6.5 x 6.5 x 11.8 in) • Layer thickness: 110 microns (0.004 in) • Build speed: 10 mm per hour (0.39 in/hour) • Laser type: Ytterbium fiber • Laser spot size: 200 microns (0.0079 in) • Material refresh rate: 30 to 50 percent • Hopper capacity: 8.5 kg PA12 nylon (18.7 lb) • Dimensions: 685 x 645 x 1065 mm • Maximum part size: 15.9 x 15.9 x 29.5 cm (6.3 x 6.3 x 11.6 in) • Minimum access dimensions: 125.5 x 149.5 x 187.0 cm (49.4 x 59.0 x 73.6 in) • Printer dimensions: 64.5 x 68.5 x 107 cm (165.5 cm with stand) • Weight: 114 kg • Warm-up time: 60 minutes • Operating environment: 18 to 28°C (68 to 82°F), ≤30% humidity • Internal temperature: 200°C (392°F) • Temperature control: Quartz tube heating elements, PTC cartridges • Air treatment: Pressure-controlled two-stage filtration, HEPA and carbon filters • Power requirements: EU 230 VAC 7.5A, US 120 VAC 15A • Galvanometer: Formlabs proprietary • Laser wavelength: 1065 nm • Laser power max: 10 watts • Beam divergence: 4.01 mrad • Laser class: Class 1 • Connectivity: WiFi 2.4 GHz, Ethernet 1000 Mbit, USB 2.0 • Touchscreen: 10.1" 1280 x 800 • Controller: Brand Formlabs • Note: The display is damaged, but this does not affect functionality Fuse Sift OPTIONAL: Fuse Sift (price upon request) • Fuse Sift dimensions: 99.1 × 61.0 × 188.8 cm (39.0 × 24.0 × 61.8 in) • Fuse Sift weight: 93 kg (without build chamber or powder) (205 lb) • Build chamber dimensions: 27.9 × 34.2 × 48.9 cm (11.0 × 13.5 × 19.3 in) Fgedpfx Anjy Sy Nvolsg • Build chamber weight: 11 kg (17.6 kg filled with 20% packed powder) (24.3 lb, 38.8 lb) • Build volume: 16.5 × 16.5 × 30.0 cm (6.5 × 6.5 × 11.8 in) • Fresh powder container capacity: 8.5 kg Nylon 12 (18.7 lb) • Waste powder hopper capacity: 9.1 kg Nylon 12 (20 lb) • Air filtration technology: replaceable HEPA filter • Operating environment: 18 to 26°C (68 to 80°F), ≤30% humidity • Air management: negative pressure hood with replaceable HEPA filter, independent ventilation system • Power requirements: EU 230 VAC 7.5A dedicated circuit, US 120 VAC 15A dedicated circuit • Power requirements for high-performance vacuum: EU 230 VAC 10A, US 120 VAC 20A • Vacuum requirements: auxiliary vacuum with static-dissipative, grounded components • Noise emission: max. 76.5 dB

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, jam operasional: 4.500 h, Fungsionalitas: belum diuji, nomor mesin/kendaraan: 090119, Origin of manufacture: CE - Germany Voltage: 400V Net weight: 7,500 kg Dimensions: 2.9 x 2.3 x 2.3 m Operating hours: 29,731 h - Working hours: 4,500 h TECHNICAL DATA AXES Maximum travel X-axis: 400 mm Maximum travel Y-axis: 300 mm Maximum travel Z1-axis: 475 mm Maximum travel Z2-axis: 475 mm B-axis rotary range: 0.0001 – 360° C1/C2-axis rotary range: 0.0001 – 360° WORKPIECE Maximum cubic dimension: 80 x 80 x 80 mm Maximum weight: 5 kg TURRET HEAD Number of positions: 24 Number of controlled positions: 18 Number of fixed positions: 6 Maximum tool holder (round): Ø 20 mm Maximum tool holder (square): 16x16 mm (20x20) Maximum turret head trajectory over tool tip: 500 mm Rotating tool speed: 1–9,000 rpm SPINDLE Maximum speed: 6,000 rpm Maximum bar diameter: Ø 42 mm Maximum clamping chuck diameter: 140 mm BAR PROCESSING Maximum bar length for bar feeder: 1,000 mm Maximum workpiece size for bar gripper: Ø42 x length 100 mm Maximum diameter for collet gripper: 42 mm Clamping cylinder pull and push force: 20,000 N FEED FORCES Feed force X-axis: approx. 895 daN Feed force Y-axis: approx. 895 daN Feed force Z1-axis: approx. 895 daN Feed force Z2-axis: approx. 895 daN Rapid traverse axes X/Y/Z: 20 m/min Tool control motor torque: 2.4 Nm Spindle S1 / Spindle S2: 70 Nm COOLING (Flow rate) Output of immersion pump in chip conveyor: approx. 10 l/min at 4.5 bar 80 l/min at 3.2 bar 150 l/min at 0.7 bar High pressure pump flow rate in conveyor: 10 l/min at 13.2 bar 50 l/min at 9 bar 90 l/min at 1 bar Lubricant volume in chip conveyor: approx. 134 L Coolant volume in cooling unit: 45 L CONTROL: Siemens 840D WORKING ACCURACY Resolution X/Y/Z: 0.1 µm Resolution B-axis: 0.0001° Resolution C-axis: 0.0001° Positioning accuracy: 5 µm Accuracy: 0.6 µm Maximum runout error: 0.5 µm ELECTRICAL Spindle 1 / Spindle 2 (at 100%): 11 kW Spindle 1 / Spindle 2 (at 40%): 15 kW Fgsdpfx Anjht Hg Djleg Feed motor axes X/Y/Z1/Z2: 1.3 kW B-axis: 1.3 kW Tool control: 2.3 kW Hydraulic pump: 7.5 kW Hydraulics return: 0.75 kW Cooling unit fan 1 / 2: 0.18 kW Cooling unit circulation pump: 1.1 kW Cooling unit compressor: 2.2 kW Chip conveyor: 0.25 kW Emulsion pump 1: 1.1 kW Emulsion pump 2: 2.2 kW Control voltage: 400 V Network frequency: 50Hz (60Hz optional) Control circuit voltage: 24V DC Total power consumption: 35 kW Rated current: 63A Connection: Network TM / TT / IT PNEUMATICS Maximum operating pressure: 10 bar Normal operating pressure: 6 bar Minimum operating pressure: 5 bar Air output: approx. 150 L/min Solenoid voltage: 24V DC Oil mist tank capacity: 12 L Quality standard: 2 according to Pneurop 6611 NOISE LEVEL Normal operation: 78–80 dB All technical data are provided subject to errors or omissions and are non-binding. Inventory No. 2321018, Machine consisting of: Chip conveyor Prepared for bar loader connection Tool holders: 6 stationary drills ER32 8 turning tool holders 5 driven tool holders ER32 4 driven tool holders ER25 6 driven tool holders ER20

Kondisi: bekas, Tahun pembuatan: 2018, 3D printer Fsdpsvtftqefx Anljgg Laser type / power: Yb fiber laser / 250 W Wavelength: 1070 nm Lens: F-Theta precision lens Build volume: Ø 100 mm x 100 mm Reservoir volume: Ø 200 mm x 200 mm Coater: Rotationally guided coater Gas connection: Argon / Nitrogen Layer thickness: 20 – 100 μm Scan speed: Jog 20 m/s, Operation 6 m/s Spot size: min. 40 μm Chamber opening: 450 x 180 mm

Kondisi: bekas, Thread rolling machine – thread roller ORT RP18 2-roll Swivelling spindle Fjdpfxjuua H Re Anlsgg Overhauled with Siemens PLC See video The machine is powered in our warehouse Test run possible