Kompresor sekrup

FINI K-MAX 1510 VS (IE3)

Kondisi: baik (bekas), Tahun pembuatan: 2010, jam operasional: 100.000 h, tekanan (min.): 10 batang, tekanan (maks.): 10 batang, jenis pendinginan: air, Perlengkapan: Pelat tipe tersedia, dokumentasi / manual, pengering pendingin, Atlas Copco Screw Compressor GA 18 - 10 FF Fully automatic, internally completely piped and wired compact unit, single-stage oil-injected compression, air-cooled, soundproofed, with integrated refrigeration dryer (WorkPlace Air System™). Technical Data Reference Conditions: Inlet pressure 1 bar Inlet temperature 20 °C Relative humidity 0% Usable volume flow at the outlet of the compact unit at operating overpressure 9.75 bar: 49.4 l/s (2.96 m³/min) per ISO 1217-3, C Motor rated power 18 kW Motor rated speed 4,867 rpm Shaft power requirement at maximum operating pressure 24 kW Shaft power requirement at idle 5.6 kW Compressed air temperature after dryer 23 °C Dodpfx Abou Rptyehsun Cooling air flow 0.23 m³/s Oil filling quantity 12.2 l Residual oil content under reference conditions

Kondisi: baru, Cross table with rotary plate Djdpfxoupw T Rs Abhoun Table length: 430 mm Table width: 240 mm X-axis travel: 225 mm Y-axis travel: 160 mm Table height: 160 mm T-slots: 12 mm Weight: 45 kg Dimensions (L x W x H): 0.6 x 0.45 x 0.2 m

Kondisi: hampir baru (bekas), Tahun pembuatan: 2016, Gaya penutupan: 110 t Diameter sekrup: 22 mm Volume tembakan: 41 cm3 Rasio L/D sekrup: 20 Volume langkah terhitung: 41,8 cm3 Tekanan injeksi yang benar: 2.864 bar Kecepatan putaran maksimum sekrup: 500 min Torsi sekrup: 150 Nm Djdpfxeu Eki Ss Abheun Gaya kontak gerak nosel: 250/40 mm/kN Aliran injeksi luar: 76 cm3/s Daya pemanas silinder: 6,3 kW Jumlah zona pemanasan: 4 Tipe: Horisontal Penggerak: Listrik

Tahun pembuatan: 1980, Kondisi: baik (bekas), Subfloor circular saw, crosscut saw, pull saw, mitre saw, panel saw, table saw, circular saw - Handover: in as-is condition as inspected - Table extension: custom-made - Manufacturer: Ulmia, Circular Saw Type 1612SP - Motor power: 2.2 kW / 2800 rpm - Saw blade: Ø 280 mm - Max. cutting height: 70 mm Dsdpfx Asf D H Hbobhsun - Bevel cut: up to 45° - Length stop: up to approx. 800 mm - Dimensions: 1000/1340/H980 mm - Weight: 306 kg

Kondisi: baik (bekas), Tahun pembuatan: 2014, daya: 14,8 kW (20,12 hp), laju aliran volumetrik: 1,63 m³/jam, tekanan (maks.): 7,75 batang, Kompresor Udara Atlas Copco SF 15 FF Dusdpfexk U Dcsx Abhsn Produsen: Atlas Copco Tipe: SF 15 FF Tahun pembuatan: 2014 Tekanan maksimum: 7,75 bar Kapasitas aliran: 4,95 m³/menit Aliran udara terkompresi: 27,1 l/detik, 1,63 m³/menit Daya motor: 14,8 kW = 20 HP Kecepatan motor: 2885 rpm Berat: 595 kg Catu daya: 400 V, 50 Hz, 3 fase Tipe: Bebas oli Kelas ISO: 8573-1 Class 0 Perlengkapan: Sistem Udara Tempat Kerja terintegrasi™, dilengkapi dengan SMARTLINK Kontrol: Elektronikon Asal: Diproduksi di Belgia Tidak ada jaminan atas kebenaran, kelengkapan, dan aktualitas informasi ini.

Tahun pembuatan: 1986, Kondisi: siap digunakan (bekas), Clamping force: 2,700 kN, Injection volume: 20,300 cm³, Injection pressure: 1,360 bar, Total power: 418 kW. The machine was completely overhauled in 2008, receiving new pumps as well as renewed bushings and guides. In 2016, the machine was equipped with a new Siemens control system. In 2021, all pumps and valves were recalibrated and all sliding rails were replaced. Duedpfjpvkzyjx Abhjn

Kondisi: baru, Tahun pembuatan: 2024, Delivery pressure: 10.0 bar Effective delivery rate: 1,000 L/min Motor: 400 V Tank capacity: 250 liters Machine weight: approx. 410 kg Duodpfx Ajxaby Nobhjn Total power requirement: 7.5 kW Dimensions (L x W x H): 1915 x 650 x 1640 mm Exhibition machine / has not been in use New BOGE SOLID series model ~ List price: €9,450 / Special price on request Made in Germany Features: - Equipped with tank and dryer / immediately operable - Microprocessor control SOLID base control - Mains pressure sensor - Belt-driven drive system - Low compressed air temperature thanks to efficient aftercooler - Horizontally positioned built-in compressed air receiver - Includes refrigerated compressed air dryer * Fully automatic operation with pre- and after-filter (installed) (also available with 7.5 bar)

Tahun pembuatan: 1960, Kondisi: bekas, R.A.S. rotary mandrel press Model 200-20 Dodpfxoic Rn Uo Abheun Machine No. 117/6 Stroke 200 mm Pressing force 20 t Spindle diameter 60 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2001, Dijual burner bahan bakar ganda minyak/gas merek Weishaupt RGL40/1-B (2550 kW) yang berfungsi dan sangat terawat, termasuk armatur gas Dungs DN 65, tahun pembuatan 2001, dengan kabinet kontrol. Dujdpjwgk Rajfx Abhjn

Kondisi: bekas, Tahun pembuatan: 2021, de-hu-001 Dodpexrdw Isfx Abhoun