Latihan pilar

FLOTT SB P30 ST (NEU ab Werk)

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, 5 kW air-cooled chiller for outdoor installation with axial fans. Standard equipment includes a p3 pump. Technical data upon request. The machine is available from our stock in Güglingen. We are happy to offer free, expert advice for your application. We always have a changing selection of chillers in all sizes available from stock, as demonstration units, brand new, and sometimes used. Bcjdpfx Aefqlllehwsw Additionally, we sometimes accept refrigeration systems as trade-ins or purchase them outright.

Kondisi: baik (bekas), Fungsionalitas: belum diuji, berat keseluruhan: 80 kg, lebar total: 990 mm, tinggi total: 870 mm, panjang total: 1.180 mm, tinggi tumpukan: 800 mm, kapasitas tangki: 900 l, berat kosong: 80 kg, We hereby offer you, subject to prior sale, approximately 200 used steel stacking boxes / storage containers made of galvanized sheet steel. Manufacturer: unknown Overall dimensions of the stacking box: 1180 x 990 x 870 mm (L x W x H) Bedpfxsvtckmj Ahwocw Stacking height: 800 mm Internal box height: 700 mm Box volume: approx. 0.9 m³ Weight: approx. 80 kg/piece Notes: The steel stacking boxes were previously used by the former owner on construction sites as containers for sorted construction waste. Emptying into larger transfer containers / skips was carried out by forklift with rotator. Therefore, the stacking containers have been manufactured with extra thick walls. Sale is subject to prior sale, excludes any warranty or guarantee, and is intended for commercial customers only. We would be pleased if the steel stacking containers are of interest to you. Your Service Team Mertens & Frowein GmbH

Kondisi: baru, Tahun pembuatan: 2025, New machine. Please inquire for the current daily price and delivery time. Dimensions and Weights: Length (product): approx. 2129 mm Width/Depth (product): approx. 1046 mm Height (product): approx. 1687 mm Weight (net): approx. 645 kg Electrical Data: Drive motor power: 3 kW Connection voltage: 400 V Mains frequency: 50 Hz Hydraulic pump motor power: 1.4 kW Coolant pump motor power: 100 W Total connected load: 3.8 kW Bjdpfx Aherah S Hswscw Machine Data: Saw band speed(s): 20 – 80 m/min Saw band length: 3770 mm Saw band width: 34 mm Saw band thickness: 1.1 mm Cutting angle: -45 – 60° Manual operation: hydraulic via push button Semi-automatic operation: automatic Cutting Capacities: Cutting capacity 0° round (solid material): 355 mm Cutting capacity 0° square (solid material): 300 mm Cutting capacity 0° rectangle vertical (solid material): 300 x 490 mm Cutting capacity -45° round (solid material): 290 mm Cutting capacity -45° square (solid material): 250 mm Cutting capacity -45° rectangle vertical (solid material): 250 x 250 mm Cutting capacity +45° round (solid material): 350 mm Cutting capacity +45° square (solid material): 290 mm Cutting capacity +45° rectangle vertical (solid material): 290 x 340 mm Cutting capacity +60° round (solid material): 230 mm Cutting capacity +60° square (solid material): 180 mm Cutting capacity +60° rectangle vertical (solid material): 180 x 220 mm

Kondisi: baru, Tahun pembuatan: 2026, Stepless electronic spindle speed: 40–4000 rpm Spindle taper: MT2 Table height adjustment via rack and pinion Maximum thread cutting capacity: M10 Thread cutting depth set via digital depth display Bodpoby Swhsfx Ahwscw Digital speed display Digital drilling depth display Drilling depth stop via stop ring Feed: manual Table height adjustment via rack and pinion Continuous/standard drilling capacity in steel: Ø 13 mm / 15 mm Drilling depth: 60 mm Throat: 225 mm Column diameter: 60 mm Usable table surface (W x L): 330 x 250 mm Machine dimensions (W x D x H): 420 x 450 x 860 mm Machine dimensions (with base) (W x D x H): 452 x 700 x 1130 mm Weight: 62 kg Max. distance spindle/table/base: 300 / 360 mm Motor: single-phase with frequency inverter, 230 V, 0.54 kW OPTION: Drilling package no. 2 - FELIX vice, jaw width 80 mm, max. opening 120 mm - Keyless drill chuck 1–13 mm, mount B16 - Morse taper arbor MT II/B16 - Reducing sleeve MT II/MT I Price: €320 Factory warranty: 3 years Free delivery including packaging (Germany only) NOT THE RIGHT MACHINE? WE ARE AN AUTHORIZED FLOTT SERVICE PARTNER AND CAN SUPPLY ANY PRODUCT FROM THE FLOTT RANGE! PLEASE REQUEST AN OFFER!

Kondisi: baru, Tahun pembuatan: 2025, 2-driven-roll profile bending machine Hydraulically adjustable top roll Shaft diameter: 40 mm Roller diameter: 152–162 mm Rotational speed: 8.5 rpm Top roll adjustment: 120 mm Capacity chart: see attachment Bcedpfehgiuhsx Ahwow Machine available in various versions: Manual adjustment, 3-roll drive, etc.

Kondisi: bekas, Tahun pembuatan: 1979, Swing diameter over bed: 480 mm Swing diameter over cross slide: 200 mm Turning length: 650 mm Max. workpiece diameter over bed cover: 200 mm Centre distance: 750 mm Spindle head: Size 6 Spindle bore: 58 mm Total power requirement: 18 kW Machine weight approx.: 2.7 t Space requirements approx.: 2.70 x 1.58 x 1.68 m Bedpfx Asdmbrxshwjcw CNC path control, 2 axes, SINUMERIK 5T with threading, tailstock quill taper Morse 4, maximum quill travel 200 mm, tailstock offset 550 mm Control cabinet 80x40x230 cm, weight: 150 kg Motor control cabinet with Siemens 810T, dimensions: W/D/H 80 x 90 x 100 cm, weight: 200 kg 4x plates + Spax screws + sheet metal screws drilling machine, drill bits

Kondisi: baru, Tahun pembuatan: 2025, Bending machine press brake by Prod-Masz with lateral cutouts for bending from top to bottom. This allows you to finish your window sills easily. The machine’s design provides a 6 cm high space above and below the clamping beam for special bending operations. This is a modern sheet metal bending machine capable of bending sheet metal from three sides. Bcjdpfocntm Aex Ahwjw Press Brake RED PLUS 2200/0.8 incl. foot operation and transport castors + SPECIAL CUTOUT Technical data: - Maximum working width: 2200 mm - Bending capacity: up to 0.8 mm (steel sheet) - All non-ferrous metals: 30% higher bending capacity - Bending angle: max. 145 degrees - Cutting with rotary shear across the whole working width - Bending beam thickness: 15 mm - Lifting the upper beam in three positions - Upper beam stroke: 80 mm - Degree scale - Angle stop - Rear support for holding the sheet - Front depth stops - Weight: approx. 230 kg Rotary shear (max. cutting capacity 0.8 mm / steel) available for an additional 350 Euro The machine complies with CE standards and comes with a 12-month warranty. Delivery cost: 180.00 Euro to Germany Transport castors included. Cash on delivery! We look forward to your enquiry!

Kondisi: baru, Table height: 800 mm Dimensions (LxWxH): 1950 x 950 x 800 mm Bcsdpogrvwfofx Ahwsw Table width: 950 mm Table length: 1950 mm Approx. weight: 288 kg Special worktable systems of the SST, SFT, and SWT fix series as 3D clamping workstations for efficient production of assembly, welding, and adhesive structures, e.g. fixtures, railings, frames, etc. With the help of the comprehensive range of clamping accessories (see catalogue section "Welding Table Accessories"), these table systems can also be used as flexibly configurable fixtures, thereby enabling high-quality manufacturing of small and medium series. The special worktables feature a 16 mm (dual standard) or 25 mm (triple 24+1) thick worktop, which is equipped with a Ø28 mm hole grid. Additionally, the table top has a 100 x 100 mm grid marking for easy alignment of components or fixtures. The hole grid allows for the use of a wide variety of clamping and positioning elements. For specific applications, the table top surface can also optionally be fitted, deviating from the standard, with stainless steel 1.4301, aluminium, plastic, or high-strength materials such as ST70. The fully bolted construction of the clamping plate allows the work surface to be replaced cost-effectively in case of wear, making the table system especially sustainable in use. Price must be reconfirmed with the manufacturer before ordering!! For accessories and further information, please follow this link:

Kondisi: baru, Dimensions (LxWxH): 1480 x 980 x 65 to 105 Width: 980 mm Length: 1480 mm Approximate weight: 371 kg Bsdpfxsfk Ah Rj Ahwocw Welding and assembly tables of the SMT flex series are robust, height-adjustable, and practical workstations designed for handling heavy workpieces, working with electrically operated tools, or dealing with chemical or oily substances. The tables can be easily repositioned with a pallet truck thanks to transport bars on the base and can be quickly adjusted in height to match other work levels. The height adjustment range spans from 650 mm to 1,050 mm (lower working heights available on request). The solid steel worktop, up to 20 mm thick, can withstand even heavy impacts or blows, such as those that often occur when working with heavy hand tools or when handling very heavy metallic workpieces or tools, without suffering permanent deformation or indentations. The metal work surface allows unrestricted use of magnetic clamps to secure components. Thanks to its substantial weight, this universally applicable table also provides excellent stability against tipping, even when supporting heavy items or tools at its maximum height position. For accessories and further information, please follow this link:

Kondisi: baru, Tahun pembuatan: 2025, Thread cutting attachment OLED display LED lighting Continuous/standard drilling capacity (mm) - R1 30/35 mm - R2 27/32 mm Maximum thread cutting capacity - R1 M30x3.5 - R2 M24x3 Spindle Morse taper MK IV Drilling depth (mm) 160 Arm reach (mm) 300 Bcjdpfx Ajd Su Agshwjw Column diameter (mm) 140 Usable table surface (W x D) (mm) 590 x 450 Digital speed display Digital drilling depth display Drilling depth stop with fine adjustment Table height adjustment via rack and pinion Spindle/table distance (mm) 150-700 Machine dimensions without coolant system (mm) 610 x 900 x 1,980 mm Machine dimensions with coolant system (mm) 670 x 1,100 x 2,200 mm Motor 3-phase 400V with frequency converter (kW) 4.0 Infinitely variable spindle speeds R1 (single-stage) 0-1000 rpm R2 (single-stage) 0-1600 rpm Manual feed Weight (kg) 400 Optional Drill Package 6 (€ 890.00 plus VAT): - 2.0 150 machine vice [Felix] - MT IV/B18 arbor - MT IV/MT II reduction sleeve - MT IV/MT III reduction sleeve - B18 quick-action drill chuck 3-16 mm (accuracy 0.17 mm) Free delivery within Germany, including packaging! NOT THE RIGHT MACHINE? WE ALSO OFFER OTHER FLOTT PRODUCTS – REQUEST AN OFFER! AUTHORIZED FLOTT SALES PARTNER