Pusat permesinan CNC 4 sumbu

FOM INDUSTRIE FMC 470

Kondisi: baik (bekas), Tahun pembuatan: 2009, Elumatec SBZ 140, Extended Length: 7.6 meters Approximate weight: 5,000 kg Automatic tool changer 2-section clamping system 2 pneumatic stops Safety enclosure Light curtains Automatic clamp detection Central lubrication Cooling spray system Chip trolley Ppedpfsx E Ahzjx Al Isr Conditioning unit Max. spindle speed: 24,000 rpm Tool holder: HSK-63F adapter, 8-position tool changer. Max. milling diameter: 80 mm Max. saw blade diameter: 200 mm Compressed air: 7 bar The SBZ 140 is a 4-axis profile machining center (axes: X, Y, Z + A). Designed for aluminum and thin-walled steel profiles. 4-axis CNC machining center (X/Y/Z + tilting/rotating A-axis) X-axis: approx. 7,900 mm travel Y-axis: approx. 850 mm travel Z-axis: approx. 650 mm travel A-axis (rotation/tilting): Freely programmable angle, –90° to +90° Axis feed rate: X-axis up to approx. 65 m/min, Y and Z axes up to approx. 60 m/min (depending on configuration) Control: 4-axis CNC system, with PC control, color display, USB & network connection. Software: eluCam. Automatic material clamps, automatic positioning via dowel pins. Pendulum/shuttle operation (two work zones), increasing production throughput. Applications include milling, drilling, tapping, sawing, and comprehensive profile processing—all with profiles clamped in a stationary position. Please note: The information on this page has been gathered and compiled to the best of our knowledge, but accuracy cannot be guaranteed. Accordingly, this does not constitute a representation or contract, and we advise you to verify all relevant details. Financial information VAT/Margin: VAT: The listed price is excluding VAT (VAT deductible for businesses).

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2024, manufacturer: Elumatec Model SA/ SAS 142 overhauled: 2024 Max. carbide saw blade: 500 mm Saw motor drive power: 4 kW Saw motor speed: 2800 rpm Saw blade cutting speed (500mm): 4400 m/min Saw height adjustment: stepless, fully electronic Working range square 90° max.: 130 x 130 mm Working range flat 90° max.: 190 x 130 mm Working range round 90° max.: 150 mm Pneumatic feeding length: 5-560, 10-1120 mm Compressed air connection (site): 6 bar Weight (saw) approx.: 800 kg Dimensions LxWxH (saw) approx.: 2900mm x 1400mm x 1500mm Footprint LxW: 2900mm x 1400mm Additional description Elumatec SA/ SAS 142 4kW Retrofit Elumatec SA 142 4kW Retrofit Fully automatic saw for non-ferrous metals and plastics The machine is in as-new technical and optical condition following completion of the retrofit. The machine will be fully overhauled in our workshop according to customer requirements. The following components, among others, have been renewed: Ppjdpeuiy Nyefx Al Isr - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operating panel - New electrical components - New pneumatic hoses - Maintenance or replacement of all pneumatic cylinders and valve terminals - Minimum lubrication system maintenance - Replacement of general wear parts - Refurbishment of safety enclosure/cabinet Warranty: Unless otherwise agreed, we provide a 6-month warranty on all parts overhauled or replaced by us. Labor costs and wear parts are excluded from the warranty. Options: - Expansion of cutting range (flat 90° max.: 300 x 120 mm) - Chip breaker expansion (for high-quality cut surfaces without return marks) - Servo-driven material feed - Servo-driven saw blade feed - Quick clamping device for rear feed stock - Delivery and installation at your location - Training of your staff

Kondisi: sangat baik (bekas), Tahun pembuatan: 2012, The Vertical Machining Centre enables drilling, milling, cutting, and notching operations within the technical capabilities specified in the manual, on workpieces made of plastic, PVC, ABS, methacrylic, polycarbonate, thermoplastic, composite, and aluminium materials. The vertical work table allows for easy loading and unloading of workpieces, while minimizing the machine footprint to the necessary minimum. Tool changes are accomplished using a 10-position tool magazine mounted on the side of the unit, which enables a variety of operations without the need to remove the workpiece from the table. Maximum workpiece dimensions: X = 4200 mm Y = 1600 mm Z = 20 mm Rapid traverse speeds (m/min): X = 30 Y = 30 Z = 15 Milling head units T1 and T2: Spindle power (kW): 3.3 Spindle speed (rpm): max 18,000 Electric spindle with clamp: ER32 Drilling head unit T3: Psdpfx Asmzbr Ssl Iopr Spindle motor power (W): 370 Spindle speed (rpm): max 2,800

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, nomor mesin/kendaraan: XZ 10480, kecepatan rotasi (maks.): 3.500 rpm, Mesin dalam kondisi beroperasi / 400 FCRO 32 mm / Mesin pemotong untuk industri busa, Tipe Panda 400, M80, 1,9 kW, Ppedjw Iwaijpfx Al Isr Tahun pembuatan 2014, Pisau gergaji 400 mm, Dimensi total 1155 x 100 x 140 cm (dengan meja rol), Dimensi tanpa meja rol: 71 x 100 x 140 cm.

Kondisi: baik (bekas), Brand: Ercolina Model: CE40H3 Year of manufacture: 2006 Hydraulically driven Roller diameter: Ø 165 mm Shaft diameter: Ø 40 mm Tube capacity (thin-walled): Ø 70x1.5mm, minimum bending radius Ø 700 mm Tube capacity (thick-walled): Ø 2" x 3.2 mm, minimum bending radius Ø 450 mm Psdpsw Hx Tvsfx Al Ijpr Angle bar capacity: 50x50x6 mm, minimum bending radius Ø 400 mm Flat bar capacity: 50x10 mm, minimum bending radius Ø 250 mm Flat bar capacity (on edge): 100x15 mm, minimum bending radius Ø 250 mm Box section capacity: 50x50x3 mm, minimum bending radius Ø 500 mm Shaft capacity: Ø 35 mm, minimum bending radius Ø 250 mm Motor power: 1.85 kW Bending speed: 10 rpm

Kondisi: bekas, Tahun pembuatan: 2023, Double Glazing Bead Saw TRF 527 VIS CE 1 unit DOUBLE GLAZING BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double mitre saw for simultaneous cutting of two glazing beads positioned on top of each other. The right saw unit is fixed, the left unit is adjustable; the set cutting length can be read from a digital display. Both units are equipped with supports, enabling the simultaneous cutting of two glazing beads. For cutting larger cross-sections, the upper support can be removed. After the cutting process, the pneumatic clamping cylinders automatically swivel out of the way to simplify loading and unloading of the machine. STANDARD EQUIPMENT - Fixed right-hand aggregate - Digital measurement display - Pressure switch - 2 carbide-tipped saw blades - Electrical system with motor brake, undervoltage release, motor protection switch - Pressure switch - Tool kit - Safety devices with horizontal, swiveling clamping system - Two-hand operation - Belt drive - Pneumatic aggregate lift - Central support TECHNICAL DATA - Motor power: 2 x 1.2 kW - Saw blade diameter: Ø 220 mm - Max. cutting height without support: 80 mm - Max. cutting width at 90°: 55 mm - Max. cutting width at 45°: 40 mm - Max. cutting length: 2,800 mm (optionally 4,000 mm) - Min. cutting length: 158 mm - Weight: 217 kg - Space requirements (standard configuration): 3,000 x 850 mm Extended cutting capacity: 1 unit Max. cutting length: 4,000 mm Star stop with four positions: 1 unit Set of 2 mechanical stops for setting up to 4 intermediate angles Pedpfx Aoxnlgcsl Iopr Additional central support: 1 unit Adaptations for rebated profiles: 1 unit Adaptations for rebated profiles as per drawing: - Fitting on the clamping devices to compensate for the profile inclination - Inserts on the rear stops of the saw units and on the central support In the sketch below (in green), a beveled pressure piece is shown, following the inclined profile and pressing it against the (red) insert at the stop. Location: Garbsen

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: SÇ 901 S Pnömatik Alüminyum Köşe Presi Makinası, • Complies with CE standards • This is a corner crimping machine designed for 90-degree joining of aluminium profiles • Equipped with 2 pneumatic top clamps and pneumatic blade movement Ppsdpfx Aljrbiv Aj Isr • Features a millimeter scale system for blade height adjustment and movement • The centering square stop is automatic • Equipped with a discharge button for precise adjustment • Two pedals are used for pneumatic clamping of profiles • Includes polyamide plates to protect profile surfaces from damage • Side support arms are included

Kondisi: baru, Tahun pembuatan: 2026, Vollautomatisches Schneiden von mittelgroßen bis großen Aluminiumprofilen mit benutzerfreundlicher Automatisierung. Legen Sie einfach ein beliebiges Aluminiumprofil ein – die Maschine erkennt es automatisch und schneidet es mithilfe hochpräziser Servomotor-Positionsregelung entsprechend der im Auftrag festgelegten Maße. Excel-Auftragslisten können bequem per WLAN eingelesen werden, wodurch große Schnittlisten effizient verarbeitet werden. Für jedes auf das Förderband gelegte Aluminiumprofil, unabhängig von der Länge, misst ein Lasersensor die tatsächliche Profilänge. Unser leistungsstarker Optimierungsalgorithmus berechnet in Echtzeit die produktionsoptimale Schnittreihenfolge, um Verschnitt auf ein Minimum zu reduzieren. Der Zuschnitt erfolgt vollautomatisch entsprechend der berechneten Schnittliste – ohne Unterbrechung. Kein zusätzlicher Bedienereingriff notwendig, legen Sie einfach fortlaufend weitere Aluminiumstangen zu. Die Maschine ist eine schnelle und unkomplizierte Alternative zu Doppelgehrungssägen: Geben Sie einfach die gewünschten Längen und Winkel manuell ein oder importieren Sie diese und starten Sie den Prozess. Die Maschine fertigt Ihre winkeligen Zuschnitte hochpräzise und in kurzer Zeit. • Vollautomatischer Schneidbetrieb mit Profilzuführung und Längenzuschnitt • Einfache Benutzeroberfläche für automatische Bedienung – Auftrag eingeben und innerhalb von Sekunden starten • Vereinfachter Zuschnitt von Einzelteilen, Serienaufträgen oder umfangreichen Excel-Auftragslisten Ppsdpfxof Ekn De Al Isr • Bündel-/Mehrfachstab-Zuschnitt und Stückzählung • Fernübertragung von Excel-Arbeitslisten via WLAN mit umfassender Datenzuordnung • Flexibel einstellbare Schnitt- und Vorschubgeschwindigkeit für maximale Prozessproduktivität • Automatischer Optimiermodus inklusive laserbasierter Längenmessung und Restholzoptimierung für minimalen Verschnitt (optional) • Automatisches Etikettendrucken für Zuschnitte basierend auf Auftragsdaten (manuelles Applizieren der Etiketten, optional) • Direktdruck auf das Material inline – keine Bedienhandlung notwendig (optional) • Barcodelabel- oder QR-Code-Druck/bzw. -Erfassung zur Auftragsübermittlung (optional) • Automatisierte Servo-Verstellung des Sägegehrungswinkels bis zu ±75° (optional) Hervorragend geeignet für: • Fenster- und Türenfertigung • Produktion von Gehrungs-Aluminiumkonstruktionen • Fertigung von Aluminiumbauteilen • Produktion von Verbundwerkstoffen • Herstellung von Jalousien, Rollos und Möbelteilen • Verkauf von Aluminiumhandel Modell: A550 Länge: 6 m Lineareinheit: ProfiStop Alpha Materiallänge: 4680 mm Schubkraft: 20 – 40 kg Software: Optimierer QUALITÄT – MASCHINEN AUS AUSTRALISCHER FERTIGUNG.

Tahun pembuatan: 2013, Kondisi: siap digunakan (bekas), - GEBRAUCHT - FASERLASERSCHNEIDMASCHINE MIT PALETTENWECHSLER UND BE- / ENTLADESYSTEM X-ACHSEN-VERFAHRWEG: 3.270 mm Y-ACHSEN-VERFAHRWEG: 1.550 mm Z-ACHSEN-VERFAHRWEG: 100 mm BEARBEITUNGSBEREICH: 3.070 x 1.550 mm ZULÄSSIGE BELADUNG AUF DEM TISCH: 920 kg LASERQUELLE: AJ2000 Fiber; 2.000 W STEUERUNG: AMADA AMNC3i Ppsdpjvhc S Hjfx Al Ier GEWICHT: 11.200 kg ABMESSUNGEN (LxBxH): 10.028 x 2.900 x 2.000 mm ANMERKUNG: MIT LADESYSTEM/ENTLADESYSTEM LKI 3015FLC-AJ BAUJAHR 2013; AUTOMATISCHER DÜSENDWECHSEL

Tahun pembuatan: 2018, Kondisi: baik (bekas), For machining aluminium and steel profiles Psdpfjx Diqwsx Al Iopr Fully functional and in very good condition Processing length: 7200mm 3-axis control with 15” screen Tool changer: 8 positions / turret 8 pneumatic horizontal material clamps Autonomous clamp positioning Two separate work zones, suitable for pendulum operation 2 pneumatic material stops 8 tool positions / BT30 turret Barcode scanner Handheld control device Safety light curtain at the front and side safety fence Minimum quantity lubrication Centralised lubrication Thread cutting without floating holder Simple programming via the control panel High-speed spindle up to 18,000 rpm Including 3 angle heads X-axis [mm]: up to 7,200 / 7,200 Y-axis [mm]: up to 485 / 310 Z-axis [mm]: up to 340 / 260 Traverse speed X-Y-Z axes [m/min]: 60/60/60 Max. milling cutter diameter: 25mm Max. saw blade diameter: 180mm Max. tool length: 200mm (tool + holder) Max. spindle speed: 6,000 rpm Spindle power: 6 kW Weight: approx. 5.5 t Total power-on hours: 30,844 h Total spindle hours: 11,583 h