Mesin Penggilingan - Ponsel montante

FPT RONIN

Tahun pembuatan: 2016, Kondisi: siap digunakan (bekas), - BEKAS - MESIN FRAIS DENGAN KOLUM BERGERAK PERGERAKAN LONGITUDINAL: 6000 mm PERGERAKAN TRANSVERSAL: 1500 mm PERGERAKAN VERTIKAL: 2500 mm GERAK CEPAT L-T-V: 35 m/menit Djdpfx Ajx Ru Azec Tjkp SPINDEL: 337-5000 rpm; 42 kW; 1180 Nm MEJA KERJA: 300 x 2500 x 7000 mm KEPALA: ISO 50 ; POSISI MILLESIMAL ; SUMBU A/B OTOMATIS MAGAZIN ALAT: PICK-UP; 12 POSISI UNIT KONTROL: HEIDENHAIN TNC 640 PENDINGIN TEKANAN TINGGI: 20 Bar CATATAN: PERGANTIAN KEPALA OTOMATIS; UDARA BERTEKANAN DI DALAM ALAT; RTCP; PERANGKAT LUNAK AUTOCAL UNTUK KALIBRASI OTOMATIS

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2015, cnc-mazak-vert-langbett-hu-it-lt Dksdpfxex Ih Dmo Ac Tep

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, CNC asli (bukan hasil konversi dari konvensional ke CNC) Kontrol: Siemens 8-M Dodpfxsxyh Hve Ac Tskp Diameter piringan pelat: 3500 mm Diameter pembubutan maks.: 4000 mm Tinggi pembubutan maks.: 2500 mm Gerak vertikal stang pemotong: 1600 mm Gerak horizontal stang pemotong: 2200 mm Penampang stang pemotong: 250 x 210 mm Diameter dalam minimum: 360 mm Gerak vertikal dudukan melintang: 2000 mm/menit Daya motor chuck: 71 kW Kecepatan putar chuck: hingga 90 rpm (gearbox 2 tingkat) Kapasitas beban meja: 40 ton Feedrate: 1000 mm/menit Rapid traverse: 6000 mm/menit

Kondisi: bekas, Tahun pembuatan: 1987, x-travel 500 mm y-travel 380 mm z-travel 300 mm Control: FANUC Total power requirement: 12 kW Machine weight approx. 2300 kg Space requirement approx. ... m S T A M A (FANUC) Vertical 3-axis CNC machining center Model: MC 010 Year of manufacture: 1987 # KMH 010 1110 Work area: Longitudinal travel X-axis: 500 mm Vertical travel Z-axis: 300 mm Cross travel Y-axis: 380 mm Table size / working area: 650 x 380 mm Table load capacity approx.: 200 kg Installation height between table/spindle: 240-540 mm Distance to spindle center approx.: 350 mm Tool holder: SK 30 Spindle speeds: 1,500 - 6,000 rpm Feed rates / rapid traverse max.: up to 1,000-4,000 mm/min / 15 m/min Drilling/milling capacity in steel: 20 mm / 130 cm³ Milling in aluminium: 500 cm³ Dkedst Hw H Espfx Ac Tsp AC main drive approx. 3.7 / 5.5 kW Total power approx. 12 kW - 380 V - 50 Hz Weight approx. 2,300 kg Accessories / special equipment: • Original FANUC control with screen and all modern subroutines, error diagnosis, electronic handwheel, RS 232, easy and fast programming, directly at the machine, etc. • Vertical turret head with 10 tool stations ISO 40, fast tool change time approx. 7 seconds chip-to-chip, • CNC-controlled rotary table mounted on the table (not a CNC axis), ideal as an indexing table, hydraulic, Type RST 2 • Separate coolant system • Various tool holders with and without tools Ideal machine for productive drilling, tapping, and milling in steel and aluminium. Condition: good to very good – demonstration-ready, under power. Delivery: immediate ex stock, loaded free onto truck. Payment: strictly net – upon receipt of invoice. We look forward to your order. We always have a large selection of all types of CNC machining centers in stock – please ask for alternatives!

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2012, Penggerak Utama Dodpfx Acjx D I Rpj Tjkp Jumlah sumbu: 5 Pusat turn-mill Mazak INTEGREX I-150 5-sumbu ini diproduksi pada tahun 2012. Pertimbangkan kesempatan untuk membeli pusat turn-mill Mazak INTEGREX I-150 ini. Hubungi kami untuk informasi lebih lanjut. Jenis Aplikasi Bubut

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2006, 01 Dkjdpfx Ajw Tir Uec Tjp

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 825 mm, jarak gerak sumbu Z: 1.100 mm, gerak cepat sumbu X: 48.000 m/menit, pergeseran cepat sumbu Y: 80.000 m/menit, pergerakan cepat sumbu Z: 48.000 m/menit, lebar meja: 835 mm, panjang meja: 3.500 mm, beban meja: 3.500 kg, MATEC 40 HV 3-Axis Machining Centre MACH-ID 9178 Manufacturer: MATEC Model: 40 HV Control: Heidenhain iTNC530 Year of manufacture: 2008 X-axis travel: 3000 mm Y-axis travel: 825 mm Z-axis travel: 1100 mm B-axis: -3° to +105° Table length: 3500 mm Table width: 835 mm Table load capacity: 3500 kg Feedrate X-axis: 48,000 mm/min Dsdpfxewyv Nzj Ac Tokp Feedrate Y-axis: 80,000 mm/min Feedrate Z-axis: 48,000 mm/min Tool holder: HSK 100 ISO/BT/MK Spindle power: 37 kW Spindle speed: 8000 rpm Tool changer: 40 positions Coolant through spindle (IKZ): 25 bar Number of controlled axes: 4 Chip conveyor: Yes Coolant system: Yes Length: 8000 mm Width: 3800 mm Height: 3800 mm

Kondisi: bekas, Tahun pembuatan: 1965, Maximum core drilling diameter: 50 mm Drilling depth: 2,000 mm Swing diameter: mm Maximum drilling diameter: 110 mm Total power requirement: 30 kW Machine weight: approx. 10 t Dodot Hwucepfx Ac Tjkp Year of manufacture: 1965 Overhauled: 2000 Drilling diameter: - Solid drilling approx. 2 - 50 mm - Boring approx. 100 mm Maximum drilling depth: 1,600 / optionally up to 2,000 mm (see stroke/installation length) Stroke of drilling carriage: approx. 4,000 mm Distance between the two spindle heads: 5,000 mm Centre height above guideway: 350/450 mm Drilling feed of the drilling carriage, stepless: 20 - 200 mm/min Rapid traverse of the drilling carriage: 2,500 mm/min Workpiece speeds via belt drive: 260 - 650 / 650 - 1,625 rpm Work spindle drive: 24 kW Coolant pump drives: 1 x 7.5/15 kW, 1 x 15/28 kW Total drive approx. 60 kW, 380 V - 50 Hz Total machine/guideway length: 7,500 / 5,000 mm Total weight: approx. 10,000 kg Accessories / Special configuration: - The machine consists of the following elements: The main spindle on the left, followed by a BOZA, a table unit powered by a ball screw, BOZA with increased centre height, and at the end, a spindle head of the B 16 series with drive motor approx. 7.5 kW, n = 900/2,400 and 2,400/6,000 rpm; very large and complex coolant system with filter unit, extensive accessories and drilling tools up to 100 mm Ø - Suitable for rotating workpieces/fixed drilling tools (ELB and BTA methods), as well as for stationary workpieces and rotating drilling tools. It can operate with internal oil supply (ELB) or external oil supply (BTA). - Complete coolant oil system with tank and filter, 2 high-pressure pumps by SIG, adjustable flow rate: 17/40/120 or 220/500 litres/min, tank capacity approx. 2,500 litres - Feed of the main carriage via ball screw and infinitely variable DC motor. The main carriage currently holds a cross-adjustable table (approx. 500 mm adjustment, table size approx. 800 x 800 mm) for accommodating cubic and cylindrical workpieces. Electrically controlled via a cam track (approx. 2,500 mm) and limit switches for rapid traverse, feed, and return. - 2 closed 3-point steady rests, FORKHARDT 3-jaw manual chuck, approx. 315 mm Ø - Modernised control panel with speed display, feed adjustment and display, kW display, feed/rapid traverse switching (left/right), etc. - 2 separate switch cabinets, separate BoZa, sleeves, reducers, clamping aids, and much more. Condition: Good – demonstration ready shortly. Due to the accessories, the machine is very valuable. Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice Further deep hole drilling machines always in stock – please enquire.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2000, jam operasional: 25.000 h, jarak pergerakan sumbu X: 10.300 mm, jarak lintasan sumbu Y: 2.000 mm, jarak gerak sumbu Z: 1.800 mm, kecepatan pemakanan sumbu X: 10 m/menit, laju pemakanan gandar Y: 10 m/menit, laju pemakanan sumbu Z: 10 m/menit, posisi kepala milling: 2.5 x 2.5 °, kecepatan spindel (maks.): 3.000 rpm, kecepatan spindel (min.): 60 rpm, lebar meja: 3.300 mm, panjang meja: 12.000 mm, diameter pemasangan: 50 mm, tinggi total: 48.750 mm, lebar total: 100.000 mm, panjang total: 212.000 mm, berat keseluruhan: 100.000 kg, Duplex-Fräsen bestehen aus zwei Maschinen, die sich gegenüberstehen und entweder separat oder als Einzelmaschine betrieben werden können. Das Werkstück kann mit zwei simultan arbeitenden Spindeln bearbeitet werden. Produktivitätssteigerung von bis zu 50 % im Vergleich zu konventionellen Lösungen wie einzelnen Fräsmaschinen Erhöhung der Fertigungsgenauigkeit durch Komplettbearbeitung des Werkstücks in einer Aufspannung (in den meisten Fällen) Dkodpfx Acjrx Rxte Tep Eine einzige Bedienperson kann die Duplex-Fräsmaschinen steuern Geringerer Platz- und Investitionsbedarf im Vergleich zu zwei Einzelmaschinen Schnelle Amortisation der Investition dank hoher Produktivität Die Duplex-Lösung ermöglicht verschiedene Konfigurationen: Einzelner Arbeitsbereich, Pendelbearbeitung Geeignet für die Bearbeitung von Baggerarmen und Auslegern, z.B. für CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo X-Achse: 10.300 mm Y-Achse: 2.000 mm Z-Achse: 1.800 mm Tischlänge: 12.000 mm Tischbreite: 3.300 mm Tischbelastung: 100.000 kg Antriebsleistung der Spindel: 22/30 kW Spindeldrehzahlen: 60–3.000 U/min Spindelaufnahme: 50 ISO / BT / MK Vorschub X-Achse: 10.000 mm/min Vorschub Y-Achse: 10.000 mm/min Vorschub Z-Achse: 10.000 mm/min Fräskopf-Autopositionierung: 2,5 x 2,5° Betriebsstunden: 25.000 h Länge: 21.200 mm Breite: 10.000 mm Höhe: 4.875 mm Gewicht: 100.000 kg

Kondisi: baik (bekas), Tahun pembuatan: 2012, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 2.000 mm, daya: 13 kW (17,68 hp), This is a LEVIBRETON ONE surface grinding machine. The machine is equipped with a pendulum head and a 750 mm diameter grinding plate. With the appropriate tooling, the machine can be used for polishing, satin-finishing, and bush hammering the surfaces of both hard stones and soft stones (such as marble). Dkedpfx Acorpi E Aj Tjp