Kompresor sekrup

GARDNER DENVER KSA18

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Kompresor ulir GARDNER DENVER KSA18, mesin di tangki 500L, setelah servis Ljdpfxjw Nilto Aahjak Data teknis: kapasitas: 2,50 m3/menit; motor berkekuatan 18,5KW; tekanan maks.: 10 bar; jam operasi: 12.632h tahun: 2011; kompresor berfungsi penuh; harga netto: 10.500 zł harga bruto: 12.915 zł Tautan ke rekaman di bawah.

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2002,

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Krauss Maffei Injection Molding Machine KM 300-1000 C2 Year of manufacture: 2006 Clamping unit: Clamping force: 3000 kN Maximum mold opening force: 160 kN Moving platen force (Opening): 86 kN Moving platen force (Closing): 68 kN Mold platen size (HxV): 995 mm x 1050 mm Distance between tie bars (HxV): 630 mm x 630 mm Mold opening stroke: 820 mm Minimum mold height: 330 mm Maximum daylight: 1150 mm Injection unit: Screw diameter: 55 mm Ls/D ratio: 20 Injection pressure: 1904 bar Shot volume: 523 ccm Shot weight, PS: 476 g Lajdpfx Aajrbhhhehok Injection rate: 428 ccm/s General data: Dimensions (m): 5.97 x 2.04 x 2.36 Weight (t): 12.5

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, jam operasional: 5.000 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: DD10059787001, berat keseluruhan: 4.000 kg, panjang total: 2.500 mm, lebar total: 1.400 mm, tinggi total: 2.000 mm, daya: 132 kW (179,47 hp), tekanan (maks.): 13 batang, jenis pendinginan: udara, As-new, frequency-controlled machine with heat recovery. Being replaced due to a change in air demand requirements. Ljdpfjwhu U Esx Aahsak

Kondisi: Pembawa suku cadang rusak (bekas), Tahun pembuatan: 2007, Fungsionalitas: tidak berfungsi, For sale is an injection molding machine from Netstal, model Synergy 1000-230. Following a transport accident, the control cabinet is completely damaged, so the machine is offered as a source of spare parts or for repair. The machine would otherwise be fully operational and is in good condition. Laodpforfbnmox Aahjk Technical data: Operating pressure: 210 bar, Injection force: 182 kN, Clamping force: 1,000 kN, Opening stroke: 0-400 mm, Mold height: 450-750 mm, Total weight: 7,200 kg, Operating hours: approx. 53,000 Available from March 2024. Initial fillings with hydraulic oil can be ordered from us. Upon request and for an additional charge, we can arrange loading and transport across Europe. All prices are plus VAT. Viewing is possible by appointment. Contact us—our team looks forward to assisting you. Trade-in or exchange possible! Machinery Purchase/Sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Kondisi: baik (bekas), Tahun pembuatan: 2006, Krauss Maffei Injection Moulding Machine KM 350 - 2700 C2 Year of manufacture: 2006 Control system: MC 4 Technical specifications Clamping unit: Clamping force: 3,500 kN Maximum mould opening force: 220 kN Moving platen travel force (Opening): 105 kN Moving platen travel force (Closing): 95 kN Mould platen size (h x v): 1,060 mm x 1,095 mm Tie bar spacing (h x v): 710 mm x 710 mm Mould opening stroke: 920 mm Minimum mould height: 380 mm Maximum daylight: 1,300 mm Hydraulic ejector – stroke: 250 mm Ejector force forward/backward: 95 / 48 kN Injection unit Screw diameter: 80 mm Ls/D ratio: 20 Injection pressure: 1,829 bar Lajdpfx Aemki Iuoahok Shot volume: 1,433 ccm Shot weight, PS: 1,304 g Injection rate: 513 ccm/s Screw speed: 218 rpm Max. plasticising rate: 108 g/s Nozzle pressure: 173 kN Electrical and hydraulic equipment Nominal pump motor output: 75 kW Installed heating capacity: 36 kW Adjustable heating zones (barrel): 7 Tank capacity: 720 litres Dimensions and weight Machine dimensions: 6.91 m x 2.20 m x 2.41 m Total machine weight: 15,300 kg Maximum mould weight: 4,780 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, Engel ES 650/175 HL-V Schließkraft 175 Tonnen Baujahr 1999 Schneckendurchmesser 45 mm Hubvolumen 318 cm³ Lajdpfx Aepdrzhjahsk Vergrößerte Aufspannplatte 820 x 750 mm Mindest-Werkzeugeinbauhöhe 250 mm

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, Wittmann Battenfeld EcoPower 110/130 Injection Moulding Machine Electric, energy-efficient machine Control system: UNILOG B6 Year of manufacture: 2011 Clamping force: 110 tons Screw diameter: 25 mm Maximum shot weight: 55.8 g (PS) Tie bar spacing: 470 x 470 mm Minimum mould height: 200 mm Maximum mould height: 450 mm Hydraulic operating pressure: 210 bar Machine weight: 4,600 kg Dimensions (L x W x H): 420 x 140 x 270 cm Ledsrn I Nrjpfx Aaheak The Battenfeld has approximately 60,000 operating hours (the computer in the machine was replaced and the hours were not transferred; currently, the counter shows fewer hours: 4,944).

Tahun pembuatan: 2003, Kondisi: siap digunakan (bekas), Clamping force: 500 kN, heating capacity: 4.9 kW, connected load: 19.9 kW, operating hours: 57,024 h, equipped with handling unit and conveyor belts, without dosing unit. Lsdpfx Asmrri Dsahsak

Kondisi: baik (bekas), Tahun pembuatan: 2001, Netstal S-2400-900 Injection Moulding Machine Year of manufacture: 2001 CLAMPING UNIT Clamping force (tons): 240 Distance between tie bars (mm): 630 x 630 Platen size (H x V) (mm): 907 x 910 Mould height (max.-min.) (mm): 460-800 Daylight between platens / Space between platens (mm): min. 460 Opening stroke / Max. opening stroke (mm): 0-510 Ejector force (kN): 59.4 Ejector stroke (mm): 175 INJECTION UNIT Screw diameter (mm): 55 Maximum shot weight (PS) (g): 456 Ledpfx Aaerbzbbehsak Injection volume (cm³): 475 Injection pressure (bar): 1890 Injection rate (cm³/s): 2375 Nozzle force (max., ton): 88 Nozzle stroke (max., mm): 200 Plasticizing rate (g/s): 70 Number of heating zones: 6+1 (cooling) Heating power (kW): 30.3 OTHER DATA Hydraulic oil tank capacity (litres): 420 Weight (kg): 15,800 Dimensions (LxWxH): 6950 x 2075 x 2480 mm