Mesin mengasah

Gehring GR 2000 - 750 - 700

Kondisi: baru, Tahun pembuatan: 2024, Protec welding positioner with 20,000 kg load capacity. Speed steplessly adjustable from 0.05 to 0.35 rpm. Hand-held remote control included. Foot remote control available at extra cost of €390. Height: 700 mm Knodpfxoid Szke Aahsf Diameter: 2000 mm

Kondisi: baru, Table diameter 350 mm Table load capacity 0.1 t Ksdpfxjgvkk No Aahsnf Swivel range 0-90 degrees Horizontal table load 100 kg Vertical table load 50 kg Bore diameter 30 mm Table rotation speed 0.5 - 5 rpm Voltage 230 V Total power requirement 0.2 kW Machine weight approx. 0.2 t Space requirement approx. 0.5 x 0.5 x 0.5 m Welding Table with Hollow Shaft D-DWP Rotary-tilt tables with bore for rotating, tilting, and welding small workpieces up to 100 kg. - Rotary and tilt axes - Infinitely variable speed control - Compact design - Including foot pedal

Kondisi: baik (bekas), diameter penggilingan: 1.600 mm, panjang penggilingan: 6.000 mm, Manufacturer: CINCINNATI Knodpfx Aovvvw Ejahef Model: 60 x 216 Year of manufacture: 1970 Convex and concave grinding 6 steady rests included 2 steady rests hydrostatic Coolant system with magnetic filter Measuring system with 5-arm caliper: Arm 1: Working range 1300 to 1600 mm Arm 2: Working range 1000 to 1300 mm Arm 3: Working range 700 to 1000 mm Arm 4: Working range 400 to 700 mm Specifications Metric US Standard Center height: 787 mm Grinding diameter Ø: 1574 mm Grinding length: 5800 mm Grinding wheel dimensions: 914 x 101.6 x 304.50 mm Grinding wheel speed: 1800 rpm Approximate dimensions: Length: 15,100 mm Width: 5,500 mm Height: 3,550 mm Weight: 120,000 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Consequently, no representation or contractual terms will be constituted. We recommend verifying all critical details independently.

Tahun pembuatan: 1980, Kondisi: bekas, Table length 2,000 mm Table width 1,800 mm Table load capacity 12.5 t Total power requirement 10 kW Machine weight approx. 7.5 t Space requirement approx. [to be completed] m Table size approx. 2,000 x 1,800 mm Maximum table load approx. 12,500 kg Table travel (longitudinal) 1,250 mm Table height above floor 920 mm Longitudinal feed rate 0.63 - 2,000 mm/min Rotary feed rate (based on 1,000 mm Ø) 1 - 3,150 mm/min Rapid traverse (longitudinal) 2,000 mm/min Rapid traverse (rotary, based on 1,000 mm Ø) 3,150 mm/min Machine weight 7,500 kg External dimensions (LxWxH) 3,700 x 2,100 x 920 mm Drive output total 10 kW - 380 V - 50 Hz Accessories / Special equipment - Steel telescopic covers for the guideways - Infinitely variable table feed - Optical display for setting and reading the longitudinal adjustment - Optical angle setting and reading device Kjdpot Hwq Rsfx Aahjnf Condition: satisfactory to good - ready for demonstration Delivery: ex stock - as inspected Payment: strictly net - upon receipt of invoice We kindly ask you to review our offer. Please always enquire about your requirements for good used machines with us.

Tahun pembuatan: 1995, Kondisi: bekas, nomor mesin/kendaraan: 18891, Towing capacity: 10 tons. Lift: 1000 mm 3 broaching stations With chip conveyor + platform for above-floor installation and safety door Knedebrcmkopfx Aahef

Tahun pembuatan: 1987, Kondisi: sangat baik (bekas), en-1 Stück Chemie Normkreiselpumpe mit sehr wenig Betriebsstunden. Pumpe ist geeignet für Sauerkondensat und aggressive Säuren. Auch Salzwasser geeignet!! Hersteller: Sulzer Modell: ZA 200-4500 Werkstoff: Duplex 9.4460 / Noridur 1.4593 Fördervolumen: 250m³/h Förderhöhe: 27 Meter bei 980 U/min Wellenleistung: 42 kW Ksdpfx Ash S Nz Ssahonf Motorleistung: 75 kW NPSH: 1.6 Drehzahl: 980 U/min Baujahr 1987 Pump speed of 1480 rpm is also possible!! Approximate performance at 1480 rpm (data without guarantee): Flow rate: 430 m³/h Head: 62 m Shaft power: 88 kW Stainless steel shut-off valves and pipelines are also available The material 1.4593 Noridur is highly suitable for: - Chemical and process engineering industry - Sulphuric and phosphoric acid - Salt production and processing - Petrochemical industry - Coking plants - Textile and pulp industry - Food and sugar industry - Mining/coal extraction and processing - Flue gas desulphurisation plants - Acidic, chloride-containing washing suspensions - Acidic process water - Wastewater treatment/sewage plants - Offshore and marine engineering

Kondisi: bekas, Module milling cutter Module 8 20 degrees Ksdpfx Asdklt Neahonf Length 1800 mm Diameter 120 mm Bore 40 mm

Kondisi: hampir baru (bekas), Tahun pembuatan: 2024, Double-sided cantilever rack, used: Hot-dip galvanized bolted system Scope of delivery: - 4 double-sided upright frames, height 4,160 mm with base section 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including horizontal and diagonal bracing for 1,300 mm axle spacing - Including fastening material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts and extensions available at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 6 bolted cantilever arms and 2 standard base elements, each 1,200 mm deep = 4 storage levels per rack side - Including horizontal and diagonal bracing for 1,300 mm spacing - Rack length: 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load capacity signage according to DIN standard - Expert telephone consultation available - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. Knodpfjh Ek Dajx Aahjf We offer reliable shipping with advance notice prior to delivery. The material is sensibly packed to allow for easy unloading. Note: When installed outdoors, load capacities must be reduced due to wind and snow loads. The foundation must be concrete, level, suitable for dowelling, and able to support the intended loads. The customer is responsible for checking and ensuring the ground condition, load-bearing capacity, and any necessary permits. The uprights must be anchored to the floor by the customer; wall anchoring is neither necessary nor recommended. According to trade association recommendations, the uprights should have at least 500 mm overlap above the top storage level.

Kondisi: sangat baik (bekas), Focker Strähler Welding Positioner, 8 Tonnes Kedpfx Aaof Ezdnehonf - Load capacity: 8,000 kg - Equipped with hand and foot remote control - Infinitely variable speed and tilt adjustment - Speed range: 0.02 rpm to 1.1 rpm - Table diameter: 1,500 mm - Height (tilted, center): 1,170 mm - Height (horizontal): 1,400 mm - Length: 2,400 mm - Width: 1,500 mm Condition: Visually and technically excellent, runs very quietly

Kondisi: bekas, Tahun pembuatan: 1998, Bore diameter 90 mm Stroke 490 mm Throat depth 400 mm Total power requirement 10 kW Knjdpst Hw T Ssfx Aahof Machine weight approx. 3,500 kg Space requirement approx. m KADIA Vertical honing machine Type VZH 90 / 450 F Year of manufacture 1998 Serial No. 50 / 1790 _____ Max. honing diameter 10 – 90 mm Max. honing depth 30 – 450 mm Max. spindle stroke 490 mm Spindle throat depth 400 mm Installation height under spindle nose approx. 1,200 mm Table size approx. 400 x 600 mm Max. workpiece diameter approx. 700 mm Spindle speeds steplessly variable 160 – 830 rpm Stroke speed steplessly variable 25 mm/min Spindle drive 4.5 kW Total drive power 10 kW - 400 V - 50 Hz Weight approx. 3,500 kg Overall height of the machine approx. 4,000/3,300 mm Accessories / Special equipment • Machine equipped with a Siemens S5 / Unipos 4.0 PLC control for entry of all key honing parameters such as tool speed, stroke length, expansion, honing time, error messages, etc. • With fixed table 600 x 400 mm • Automatic shut-off after a specified and pre-selectable time with subsequent spindle retraction • Automatic motorized expansion of the honing tool via electro-mechanical feed head ESZ 90/1 D • Separate hydraulics, central lubrication, workpiece clamping device on table • Currently no suitable coolant system, no honing tools included. Condition: good to very good – demonstration ready Delivery: ex stock – as inspected here Payment: strictly net – upon receipt of invoice