Mesin meninju dan menggigit

GEKA Puma 150 T

Kondisi: bekas, Tahun pembuatan: 2012, jam operasional: 25.000 h, panjang total: 5.250 mm, lebar total: 2.350 mm, tinggi total: 2.750 mm, de-hu-001 Dsdpfx Ajwmf Efsbhjcc

Kondisi: baru, - Semi-automatic - Hydraulic - Infinitely variable bandsaw speed - Double mitre - Hydraulic clamping of mitre adjustment - Saw feed pressure adjustable hydraulically - Fully hydraulic material clamping - Hydraulically adjustable clamping pressure - Cooling - Automatic shut-off - Automatic machine shut-down in case of: open cover, broken blade, insufficient blade tension Dcsdpfovkkl Tjx Abhec - Emergency stop - Documentation - 400V

Kondisi: bekas, Tahun pembuatan: 2001, Dry-type distribution transformer 630 kVA, manufacturer TESAR Italy, voltage ratio 10000 (±2 x 2.5%) / 400V, Dyn5-11-1 configuration, protection class IP23 or IP00, forced-air ventilation (AF), aluminium/aluminium windings, temperature monitoring unit, fully functional, in very good condition, 2 units available Djdpfx Aequwtxebhocc

Tahun pembuatan: 2002, Kondisi: diremaj di bengkel (bekas), Beam cutting, drilling, and marking line CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial No.: 122,400 Weight without accessories: 10,980kg - Circular saw with downward cutting motion. - Saw unit with gear system, drive system, and saw blade mounted on a heavy-duty, wear-resistant rotary bearing. - Heavy-duty saw gear with helical, hardened, and ground gearing operating in an oil bath. - Hydraulic saw blade feed, adjustable according to cutting chart, with very rapid return stroke. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic return stroke limitation. - Vertical clamping block with self-adjusting pressure plate. Dedpfx Ajhzbipebhecc - Mitre cutting device for adjusting the angle from 45° left to 35° right. - Material sensor for automatic switch from rapid to working feed. - Hydraulically liftable feed roller for optimal material transport across the saw table. - Economical lubrication system with micro-dosing unit, particularly suitable for cutting profiles. - Chip collector installed on the machine frame. Specifications: - Saw blade housing: 100x4x30x250mm - Saw blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min - Saw feed rate: 0-400mm/min - Rapid return speed: 2,000mm/min - Total power: 25KW - Working height: 640mm Cutting Capacities: 90º Cuts - Angle steel: 250mm - U steel: 400mm - Double-T beam: 600mm - Wide flange beams: 1,008x302mm - Special wide flange beams: 1,000x450mm Mitre Cuts: IPBv beam - 75º: 1,008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478x307mm IPBs beam - 75º: 1,008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial No.: 122,401 Working Capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U steel (min - max): 80x45mm - 400x110mm - Double-T beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra wide flange beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis): 1 unit - Horizontal (Z and W axes): 2 units Drilling diameter: 8 - 40mm RPM: 150 - 1100 Rapid feed - Rapid return: 3,850mm/min - 8,000mm/min Drilling spindle feed: 0-500mm/min Rapid spindle positioning: 15,000mm/min Automatic tool changer: 5 tools per drilling unit. 3x5 units = 15 total tools Total power: 45KW MARKING UNIT FEED SYSTEM: - 26 meters infeed with beam feeder + 6 side arms for parallel beam feed to roller conveyors - 30 meters with roller conveyors for outfeed + 6 side arms - 4 side arms for small parts - The majority of rollers are powered - The total length required for infeed to outfeed is approximately 60 linear meters. *Please request machine installation layout drawings.

Kondisi: baru, Tahun pembuatan: 2025, Maximum pressure: 40 tons Stroke length: 250 mm Maximum speed: 10 mm/sec Return speed: 20 mm/sec Worktable: 660x1250 mm Working height: 900 mm Oil tank: 60 liters Maximum workpiece height: 5 mm Flat capacity: 200x26 mm Tube capacity: 60x5.0 mm *not with standard tools - Digital limitation of stroke and return stroke - NC control - Adjustable hydraulic pressure - Adjustable bending speed - Fully enclosed table - The ZOPF design allows quick tool changes without loss of accuracy Dedpfx Abohgihkehocc - The hydraulic cylinder is mounted on the heavy-duty machine table, ensuring no loss of precision even under high load - With the universal tool holder and various tools, you can work with exceptional flexibility.

Kondisi: bekas, Combined profile steel shear and punching machine GEKA type HYD 80 / Hydracrop 80/A Mach. no. 9566 Year of manufacture approx. 2000 Punching force 80 tons Throat depth 300 mm Punching up to Ø 40 mm in 14 mm sheet Dcsdpfsrz Tutjx Abhoc Flat bar shear 450 x 15 mm Angle steel shear 130 x 130 x 13 mm Square shear 45 x 45 mm Round bar shear Ø 45 mm Rectangular notcher up to 12 mm Motor power 5.5 kW Electrical connection 400 Volt, 50 Hz - Back gauge with electric stroke release 500 mm - Work table with back gauge at punching station 550 x 380 mm - Working height at punching station 1100 mm - Work table with back gauge at rectangular notcher 550 x 400 mm - Working height rectangular notcher 930 mm - approx. 21 various punching tools - Operating instructions - Original paintwork, not repainted Required space L x W x H 1800 x 1150 x 1950 mm Weight 1.7 tons Very good condition

Kondisi: bekas, Tahun pembuatan: 2004, Technical details: X travel: 600 mm Y travel: 400 mm Z travel: 400 mm Spindle speed: 63 – 3,150 rpm Stepless feed: 12–3,000 / 6–1,500 (Z) mm/min Quill stroke: 100 mm Swiveling head +/-: 90° Spindle taper ISO: SK 40 Clamping surface: 630 x 400 mm Total power requirement: 8 kW Machine weight approx.: 2.2 t Djdpfx Ask Hdu Dsbhjcc Space requirement approx.: 2 x 1.9 x 1.95 m Universal milling machine with traverse control, mechanical handwheels, rotatable tilting table ±45°, hydraulic tool clamping, partial enclosure, coolant tank, manual

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 1983, Pressing force: 2,000 kN Stroke rate: 60 strokes/min Adjustable stroke: 20 – 120 mm Shut height: 450 mm (at maximum stroke, slide up) Dcsdpjgpxc Sofx Abhjc Ram reinforcement: 100 mm Table size: 850 x 810 mm Passage opening: 00 x 0 mm Ram area: 750 x 810 mm Drive power: 22 kW Features: - 1 connecting rod - 6-fold ram guide - Hydraulic overload protection - Motor-driven oil circulation lubrication - Motor-driven slide adjustment - Manual stroke adjustment - Pneumatic counterbalance cylinder for ram weight compensation - Vibration-damping machine feet

Kondisi: baru, Semiautomatic band saw for high-performance and highly precise cutting of medium-sized solid bars and profiles. The robust construction provides the machine with the necessary rigidity and cutting unit precision. Band operation is via a two-speed motor and a special reduction gear with bronze gear and tempered, ground worm screw. Flywheels are appropriately dimensioned. Sturdy band guides made with sealed ball bearings and adjustable carbide (Widia) plates. Blade tension is achieved by an electromechanical device with a micro-switch blade rotation control. Safety devices are installed on the flywheel covers and the blade for operator protection. Cutting thickness: 1.5 mm Cutting range: 60° left / 60° right Adjustable stop for repeated cuts to the same length Band cleaning device with brush Hydraulic power unit motor: 0.37 kW Electric pump for band coolant: 0.09 kW Vice jaw height: 200 mm Vice jaw length: 185 mm Dsdpfx Absfibd Tjhscc Worktable height: 760 mm Machine weight: 820 kg

Kondisi: bekas, Tahun pembuatan: 2007, nomor mesin/kendaraan: 001669, Lg 33121 Single-Sided Decoiler ARKU AH 3000/ST-M Year of manufacture: 1995 Maximum strip width: 600 mm Maximum load capacity: 3,000 kg Maximum coil outside diameter: 1,800 mm Expansion: hydraulic Hold-down arm: hydraulic Pay-off reel with auxiliary drive and brake Fixed coil loading stand + decoiler traversing device Includes: Lg 33221 High-Performance Strip Straightening Machine LORENZ BRM 50/620.9 Year of manufacture: 2007 Machine no.: 001669 Maximum pass-through width: 620 mm Number of straightening rollers: 9 Straightening roller diameter: 50 mm Dcjdpfx Abjhigmbohjc Material thickness: 0.7 to 6.0 mm Straightening rollers are multi-supported to prevent deflection All rollers driven via distribution gearbox and cardan shafts Used, as-is, ex-stock, immediately available. Overhaul possible upon request. Delivery time by arrangement. Further data will follow shortly or upon request.