Angkat gunting

Genie GS4069RT

Kondisi: bekas, Tahun pembuatan: 2020, panjang total: 3.740 mm, - Maximum working height: 14.3 m - Maximum platform height: 12.30 m - Platform height (retracted): 1.65 m - Platform length (outside): 2.79 m - Platform extension length: 1.52 m Cgjdpfxoxpx Tfo Abhon - Maximum number of persons on platform (indoor/outdoor): 4/4, 4/2, 3/2 - Rated load capacity: 363 kg - Load capacity with platform extension deployed: 136 kg - Drivable at maximum platform height: 12.3 m - Travel speed (stowed): 5.6 km/h - Travel speed (elevated): 0.5 km/h - Gradeability (stowed): 35% - Turning radius (inside/outside): 2.11 m / 4.6 m - Lift/lower time: 61/28 s - Tilt sensor activation (longitudinal/lateral axis): 3° / 2° - Leveling with maximum outriggers (longitudinal/lateral axis): 5.3° / 11.7° - Drive type: Diesel - Fuel tank capacity: 37.9 L - Hydraulic system capacity (hydraulic drive): 68.1 L - Maximum tire load: 1,737 kg - Tire contact pressure (front, full platform extension): 657 kPa - Ground pressure: 10.29 kPa - Sound pressure level (ground): 85 dBA - Sound pressure level (platform): 79 dBA - Vibration: < 2.5 m/s²

Kondisi: baik (bekas), Tahun pembuatan: 2002, Manufacturer: BRÜCK Model: 12/1600 Load capacity: 12,000 kg Maximum sheet width: 1,600 mm Coil diameter: 1,800 mm Cjdpfx Abohrnbkjhegn Weight: approx. 14 t Without control cabinet.

Kondisi: bekas, Tahun pembuatan: 2020, panjang total: 3.740 mm, - Maximum working height: 14.3 m - Maximum platform height: 12.30 m - Platform height (retracted): 1.65 m - Platform length (outside): 2.79 m - Platform extension length: 1.52 m - Maximum number of persons on platform (indoor/outdoor): 4/4, 4/2, 3/2 - Rated load capacity: 363 kg - Load capacity with platform extension deployed: 136 kg - Drivable at maximum platform height: 12.3 m - Travel speed (stowed): 5.6 km/h - Travel speed (elevated): 0.5 km/h - Gradeability (stowed): 35% - Turning radius (inside/outside): 2.11 m / 4.6 m - Lift/lower time: 61/28 s - Tilt sensor activation (longitudinal/lateral axis): 3° / 2° - Leveling with maximum outriggers (longitudinal/lateral axis): 5.3° / 11.7° - Drive type: Diesel - Fuel tank capacity: 37.9 L - Hydraulic system capacity (hydraulic drive): 68.1 L Codpsxpx Ivefx Abhegn - Maximum tire load: 1,737 kg - Tire contact pressure (front, full platform extension): 657 kPa - Ground pressure: 10.29 kPa - Sound pressure level (ground): 85 dBA - Sound pressure level (platform): 79 dBA - Vibration: < 2.5 m/s²

Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2018, jam operasional: 88 h, kapasitas angkut: 363 kg, tinggi angkat: 12.000 mm, daya angkat: 363 kg/m, panjang platform: 2.790 mm, lebar platform: 1.600 mm, berat keseluruhan: 5.039 kg, panjang transportasi: 3.120 mm, lebar transportasi: 1.750 mm, tinggi transportasi: 2.740 mm, jenis bahan bakar: hibrida, warna: biru, Perlengkapan: Pemeriksaan keselamatan UVV, === KEY SPECIFICATIONS === Year of manufacture: 2018 Operating hours: 88 hrs Machine width: 1.75 m Drive: 4x4 Drivable at full height: Yes Platform extension: Yes Power: 19.4 kW (Perkins 403D-11 diesel) Working height: 14.02 m Platform capacity: 363 kg Power source: Diesel Automatic levelling: Yes Platform dimensions: 2.79 × 1.60 m (extendable to 4.31 m) Tyres: Foam-filled all-terrain tyres CE certified: Yes Machine weight: 5,039 kg Application area: Outdoor === HIGHLIGHTS === Carefully selected from reliable and traceable sources CE certification and complete documentation included Operational and immediately available Comprehensive technical documentation available === CONDITION === Excellent condition – Demo unit with only 88 operating hours Original blue paintwork, very well maintained Immediately available from stock in Sittard === LOCATION & DELIVERY === Location: Sittard, Netherlands Worldwide shipping possible Price: €23,450 (EXW, plus VAT) The Genie GS-4069 RT scissor lift combines electric and diesel power for maximum flexibility. Equipped with 4WD, automatic levelling, and a working height of 14.1 m – ideal for construction and maintenance work on uneven terrain. This demo machine from 2018 is fully CE-certified, tested, and in very good condition. Professional technical support and spare parts available on request. Cgjdpfx Aoxdampsbhsn === DELIVERY === Crane loading available on request for smooth transport Flexible transport solutions tailored to destination and logistics requirements All transports are professionally handled by the Collé Rental & Sales logistics team

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, jam operasional: 50 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: P1.2014.86242, The subject of the report is a Dreistern laser-welded profile production line. Cjdpjxz Tuuefx Abhogn The machine has been tested but not introduced into production. It has operated for 50 hours in total. It is designed for forming cold-rolled open or closed profiles, which are laser-welded. The input material for profile production is steel strip—either black or galvanized. Component parts (serial numbers as per technical documentation): 1. Decoiler Soprem H1250/D/1700ZR, serial no.: 20140388/1, year of manufacture: 2014 2. Strip end welding machine Soprem CH-2540, serial no.: 20140388/2, year of manufacture: 2014 3. Multi-roller forming machine Dreistern RS616, serial no.: 15773, year of manufacture: 2015  - Base frame, serial no.: not available, year of manufacture: not available  - Gear unit assembly P60/80/90, serial no.: not available, year of manufacture: not available  - Drive with servomotor, serial no.: not available, year of manufacture: not available  - Stands: profiling, embossing, and perforating units Dreistern P60, serial no.: not available, year of manufacture: not available  3 x roll forming tool Dreistern RC1500, RC1501, RC1502, serial no.: not available, year of manufacture: not available 4. Laser Trumpf TruLaser Cell 1100, serial no.: S1200C0090, year of manufacture: 2014 5. Cutting machine Dreistern TS214.10, serial no.: 15122, year of manufacture: 2015  - Circular saw for cutting Dreistern S 200.10, serial no.: 15094, year of manufacture: 2014 6. Electrical cabinets 7. Laser safety system

Kondisi: bekas, Tahun pembuatan: 1968, Roll diameter 500 mm Throat depth 1050 / 485 mm Workpiece height 300 mm Saw blade length 3920 - 4050 mm Cutting speed 15 - 940 m/min Table height 1040 mm Cgsdpfsiqp Erjx Abhsn Table surface 750 x 800 mm Table tilt 15 degrees Total power requirement 4.0 kW Machine weight approx. 1750 kg Space requirements approx. 2100 x 1000 x 2100 mm - Unique mitre range left/right up to 30° acute angle - Mitre setting via lockable indexing every 15° - Adjustable saw blade for optimal entry angle - Hydraulic vice on both sides - Electronic blade breakage monitoring - Smooth-running saw carriage via preloaded recirculating linear guides - Additional table 450 x 450 mm - Machine lamp

Kondisi: baru, The Servoturn 500/2000 is a state-of-the-art universal lathe in the category of conventional lathes and belongs to the servo-lathe product group. This machine combines advanced feed technology with proven engineering, making the transition to servo-conventional lathes both more attractive and economical. Equipped with powerful servo motors and ball screw drives on all axes, the Servoturn 500/2000 offers precise control of feeds and thread pitches without the need for change gears or gearboxes. The intuitive operation allows you to conveniently select feeds and thread pitches using rotary switches. Standard features such as a 3-axis position display and a quick-change tool post significantly enhance this machine’s productivity. KNUTH machines are renowned for high repeatability and stability. You will appreciate the flexibility and excellent surface finishes, comparable to those of CNC lathes. Experience the benefits of the Servoturn 500/2000 and order today! Cgodpel Iy Sxefx Abhon

Kondisi: bekas, Technical details: Sheet width: 800 mm Coil weight: 12 t Sheet width - max.: 800 mm Sheet width - min.: 300 mm Strip thickness: max. 5.0 mm Strip speed: 4.5 / 25 m/min Working height: 1700 mm Load capacity: 12.0 t (coil) Machine weight approx.: 7.3 + 6.62 t Dimensions decoiler: 3.2 x 1.9 x 2.7 m Approx. machine dimensions LxWxH: 2.5 x 2.6 x 2.45 m Decoiler with loading device and straightening machine Coil unwinding machine UR 80.5: Max. outer Ø 1,500 mm Max. strip width: 800 mm Max. load capacity: 12 t Cedpfx Abeu Ic Avohogn Expanding Ø: 470 - 630 / 570 - 730 mm (expansion) Movable transport unit LxWxH: 1700 x 1500 x 1000 mm; transverse movement, with prism support 1000 x 1000 mm Straightening machine UAH 80: Min. strip width: 300 mm, max.: 800 mm Max. strip thickness: 5 mm 2x intake rollers Ø 144 x 850 mm, adjustable 3x lower straightening rollers Ø 100 x 850 mm, fixed 3x upper straightening rollers Ø 110 x 850 mm, adjustable 30 mm Recommendation: complete as a coil line (decoiler with loading device and straightening machine + straightening machine with hydraulic feed), optionally available for sale together with stock no. 0100571.

Kondisi: baik (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, jumlah rol pelurus: 7, berat gulungan: 4.000 kg, diameter luar koil: 1.500 mm, jumlah rol pemakan: 2, diameter rol pelurus: 80 mm, lebar gulungan: 600 mm, decoiler Type: MS 4000 Coil weight: max. 4,000 kg Strip width: max. 600 mm Coil diameter: max. 1,500 mm Expansion range: 475 – 535 mm Cjdpoq A Tw Rsfx Abhegn Design / Features: • Hydraulic expansion • Hydraulic pressure arm from above with hydraulically driven roller • Pivoting front limiter roller, rear support disc, plus 3 additional individually attachable limiter arms • Electromechanical drive of the decoiler mandrel, controlled via light sensor • Decoiler traversable hydraulically • Coil lifting table Straightening Machine Type: MR 58 Strip width: max. 600 mm Strip thickness: 0.8 – 3.6 mm at strength 400 N/mm2 Number of straightening rollers: 7 units, supported Number of feed rollers: 2 units Roller diameter: Ø 80 mm Speed: 5 – 30 m/min Design / Features: • Rollers hardened and ground • Pneumatically liftable feed roller • Straightening rollers adjustable as a block • Lateral strip guide at the machine infeed, manually adjustable via handwheel • Hydraulic strip introduction aid (support table, extendable tongue, and pressure roller from above) • Straightening head can be opened • Ultrasonic sensor for loop control • Swiveling control panel • Siemens S7-200 control system

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, Vi har nu 13 SSI Schaefer SLL LogiMat vertikala lyftmoduler från 2019 tillgängliga för försäljning. Dessa maskiner är i mycket gott skick och har servats varje år av tillverkaren sedan installationen. Tack vare regelbunden service och varsam användning är maskinerna fortfarande mycket driftsäkra. Dessa vertikala lyftmoduler är konstruerade för att ge maximal lagring på minimal yta. Brickmått: 4 025 mm bred × 815 mm djup Brickyta: Cirka 3,3 m² Antal brickor per maskin: Cirka 49 Total lagringsyta per maskin: Cirka 160 m² Utnyttjad golvyta per maskin: Endast 14,12 m² Varje maskin är utrustad med en valbar ljuspekare som visar exakt var plockning ska ske. Detta gör plockprocessen både snabbare och säkrare. För att använda ljuspekaren måste maskinen vara ansluten till ett ERP- eller WMS-system. Maskinerna har endast gått cirka 30 000 till 60 000 cykler vardera – motsvarande ca 1 till 2 års normal användning. Maskinernas höjd är 8 200 mm men kan anpassas efter lagrets takhöjd vid installation. Specifikationer – SSI Schäfer LogiMat SLL Vertikal Lyftmodul Tillverkare: SSI Schäfer Codpfx Abewi Iywohogn Modell: LogiMat SLL 4025-815-8200/400 Tillverkningsår: 2019 Skick: Mycket gott – årligen servad av tillverkaren Antal tillgängliga enheter: 13 Höjd: 8 200 mm Bredd (Maskin/Bricka): 4 570 mm / 4 025 mm Djup (Maskin/Bricka): 3 092 mm / 815 mm Utnyttjad golvyta per enhet: 14,12 m² Antal brickor per enhet: ca 49