Pusat pengolahan

GF Machining Solutions MIKRON HPM 1350U

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, jam operasional: 1.200 h, X 800 mm Y 460 mm Z 510 mm Styrsystem: FANUC Duodsv Th E Aepfx Abhsn Spåntransportör Inklusive 4-axlig rundbord.

Kondisi: bekas, x-travel 1050 mm Duedpfxovnh Umo Abhsn y-travel 600 mm z-travel 600 mm Control: Fanuc Machine weight approx. 7200 kg 8000 rpm Tool holder: 24

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2023, jam operasional: 31 h, 3D coordinate CNC measuring machine Profitech Innometrik Advanced, gantry design (demo unit at special price) Open Cable Key features of the gantry design: - Gantry construction with low center of gravity, wide bearing separation, and optimal stiffness-to-mass ratio. - Granite guideways provide consistent thermal, dimensional, torsional, and geometric stability for the machine. - 24 air bearings ensure smooth movement of all three axes. - High dynamics for improved performance: the machine achieves acceleration rates comparable to medium and large CMMs. - Thermally stable materials and components minimize the impact of ambient temperature fluctuations on measurement results. Includes air filter and regulator. - Pneumatic counterbalance system for the Z-axis. - Granite table with M10 threaded inserts. - Passive vibration isolation pads. Technical data: Measuring paths: X: 500 mm / Y: 600 mm / Z: 400 mm Max. workpiece weight: 250 kg Dujdjdyah Sopfx Abhon Machine weight: 850 kg Overall dimensions: 1290 x 1160 x 2350 mm Accuracy according to DIN EN ISO 10360-2 and ISO 10360-4: - Volumetric probing deviation: MPEP = 2.2 µm - Volumetric length measurement deviation: MPEE = 2.2 + L / 350 (µm) Environmental conditions: Standard room temperature: 18–22°C Operating temperature: 10–35°C Compressed air supply: Minimum air pressure: 6 bar Air consumption: 90 NI/min Can also be configured as a complete package with probe system, software, commissioning, and training. (Annual maintenance and calibration also available on request.)

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, ENGEL DUO 17060/2000 Injection Moulding Machine Year of manufacture: 2022 Integrated ENGEL Viper 60 Robot – RC300 TECHNICAL SPECIFICATIONS: Injection Unit: Screw diameter: 135 mm Screw stroke: 610 mm Injection volume: 8,731 cm³ Shot weight (PS): 7,860 g Screw rotation speed: 125 rpm Screw torque: 14,000 Nm Max. screw torque (at reduced speed): 15,630 Nm Plasticizing rate (3-zone screw): 222.9 g/s Plasticizing rate (barrier screw): 279.2 g/s Injection rate: 1,904 cm³/s Regenerative injection pressure: 1,648 bar Maximum pressure: 2,000 bar Nozzle stroke: 1,100 mm Nozzle contact force: 210 kN Barrel L/D ratio: 25 Number of heating zones (incl. nozzle): 8 Heating power: 88.5 kW Clamping Unit: Clamping force: 20,000 kN Minimum clamping force: 2,000 kN Opening force with cushion: 1,600 kN Opening stroke: 3,000 mm Dedpfow Aw Taox Abhsun Max. daylight between platens: 3,800 mm Mould height: 800 – 1,800 mm Tie bar spacing (HxV): 2,000 x 1,600 mm Platen size (HxV): 2,700 x 2,430 mm Max. mould weight (moving/fixed): 2x 41,330 kg Max. total mould weight: 62,000 kg Dry cycle stroke (Euromap 6): 1,400 mm Dry cycle time (Euromap 6): 5.5 s Ejector Unit: Ejector stroke: 400 mm Ejector force: 385 kN Drive and Cooling: Installed power of main drives: 265 kW Hydraulic tank capacity: 1,600 l Max. oil cooling capacity (at 25°C): 43.2 kW Cooling water consumption (at 25°C): 6.3 m³/h ENGEL Viper 60 Robot – RC300 (2022): Z-axis stroke: 4,280 mm X-axis stroke: 1,800 mm Y-axis stroke: 2,600 mm Robot fully integrated with the machine – operated from the machine control panel Machine in excellent technical condition – latest generation of ENGEL DUO with very low operating hours. Suitable for demanding large-scale production (e.g. automotive, white goods, technical applications). The machine remains powered and can be tested on site. AVAILABLE IMMEDIATELY If interested, please contact us – we can provide more photos, operational videos, technical documentation, and arrange a convenient viewing time.

Kondisi: bekas, Tahun pembuatan: 1996, nomor mesin/kendaraan: 7/4986, Total pressing force: 250 - 400 t Hydraulic ring tooth force (lower table): 20 - 200 t Djdpfjuqdxisx Abhjun Hydraulic counterforce (upper table): 10 - 100 t Ram stroke: 30 - 200 mm Ring tooth stroke: 40 mm Counterholder stroke: 40 mm Max. tool dimensions: 765 x 760 x 610 mm Number of strokes: 40 min-1 Rapid traverse down: 120 mm/s Rapid traverse up: 135 mm/s Working speed: 5 - 50 mm/s Total tool weight: 2400 kg Standard equipment Automation Run-off trough with straightening machine

Kondisi: sangat baik (bekas), Hello, Dedpeitcq Tofx Abhsun We are offering used Erowa PalletSetW vices for sale. All units have been cleaned and inspected in-house. - ER-025895 Vice PalletSet W 40mm - ER-054922 Flat Vice 8mm PalletSet W - ER-055774 Vice 0-170mm A full functional test has also been conducted. The vices show minor signs of wear but are in very good technical condition. Individual purchase is possible. Spare parts are also available. If you have any questions, please do not hesitate to contact us.

Kondisi: baru, Tahun pembuatan: 2026, Fungsionalitas: berfungsi sepenuhnya, tinggi total: 4.000 mm, berat keseluruhan: 820 kg, kapasitas angkut: 500 kg, This offer includes the following set (possibility to adjust device specifications or to purchase the vacuum lifter or jib crane separately): - Vacuum lifter for panels, suitable for panels such as: MDF, laminated, raw boards, chipboard, etc. (model WOOD SYSTEM DS 250) - Stationary jib crane - Electric chain hoist - Manual trolley Features of the WOOD SYSTEM DS 250 vacuum lifter: - Designed for handling panels - Cylinder for tilting between vertical-horizontal positions - 6 suction cups Ø 200 mm - Frame construction allows adjustment of suction cup spacing to adapt to handled materials - Beam length: 2500 mm - Each suction cup equipped with a ball valve – allows individual suction to be deactivated - Compressed air impulse function prevents ‘sticking’ effect of materials - Individual X and Y axis adjustment of each suction cup - Operator controls all functions from console (control panel): - Aggregator on/off - Vacuum on/release - Electric hoist control via thumb lever – raising/lowering the lifter - Pressure gauge - Pneumatic supply – integrated vacuum generators - Lifting capacity: 400 kg Duodjxln Drepfx Abhen - Device weight: 100 kg - CE Certificate Stationary jib crane Technical specifications: • Column height: 4 m • Height under arm: 3 m • Arm length: 4 m • Lifting capacity: 400 kg • Slewing range: 270 degrees • Lifting speed: ~3 m/min • Any RAL colour available • Manual slewing • Manual trolley • Quadruple/double needle-bearing arm for smooth rotation • Electric chain hoist • CE Certificate INCLUDED IN THE PRICE: • Pillar jib crane • Single-phase electric hoist • Manual trolley • CE Certificate • Complete documentation Standard warranty: 12 months

Kondisi: sangat baik (bekas), Tahun pembuatan: 2010, Fungsionalitas: berfungsi sepenuhnya, rentang pengukuran sumbu X: 400 mm, rentang pengukuran sumbu Z: 500 mm, de-en-001 Duedpfx Asxf T R Rebhsn

Kondisi: bekas, Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 460 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 400 mm, kecepatan spindel (min.): 30.000 rpm, gerak cepat sumbu X: 60 m/menit, pergeseran cepat sumbu Y: 60 m/menit, pergerakan cepat sumbu Z: 60 m/menit, berat keseluruhan: 7.000 kg, berat benda kerja (maks.): 500 kg, produsen pengendali: Heidenhain, model controller: TNC 640, diameter meja putar: 320 mm, berat alat: 4.000 g, Perlengkapan: konveyor serpihan, ALZMETALL Pusat Pemesinan Vertikal CNC 5-Sumbu Tipe: GS600 E/5 Tahun pembuatan: 2018 Kontrol: Heidenhain TNC640 Perjalanan XYZ: 460 x 600 x 400 mm Kecepatan spindle: 30.000 rpm Pendinginan spindle Probe 3D Atap gulung penutup Pengukuran laser Blum Sistem penjepit titik nol Erowa Robot Easy dengan 10 palet Berat benda kerja maks.: 500 kg Berat mesin: sekitar 7 ton Diameter meja putar: 320 mm Jam kerja spindle: 19.450 jam Dodpfx Ajw Rldbjbhjun Pelumasan spindle kecepatan tinggi dengan oli-udara

Kondisi: bekas, Tahun pembuatan: 2008, Used drilling center by CMA Type: TRD 40 CN 9000 Table length: 9000 mm Max. capacity: 40 mm Automatic tool changer Year of manufacture: 2008 Djdpfx Abowc Ndwehsun