Press hidrolik dua tiang

Gigant G2-1200/2

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, CMS Ypsos Vertical Glass Processing Center Nodewd Ichspfx Ahwjku Processing dimensions: Max. glass length: 3,100 mm Max. glass height: 2,000 mm Min. glass length: 320 mm Min. glass height: 220 mm Glass thickness: 4–15 mm Included equipment: - 2x suction assemblies each with 2 vacuum suction cups - Electrospindle 6 kW, 0–12,000 rpm - Tool magazine with 12 and 11 positions - Rear drilling unit - CAD/CAM system - Centralized lubrication

Kondisi: bekas, Tahun pembuatan: 2010, Pressure: 600 t Frame gap: 3640 mm Fixed stroke: 350 mm Stroke rate: 11 - 44 strokes/min Shut height (stroke + ram adjustment at top): 1550 mm Side frame opening: 2200 mm Bolster area: 3600 x 2500 mm Ram area: 3600 x 2500 mm Ram adjustment: 400 mm Strip width: 2000 mm Material thickness: 0.6 - 2.5 mm Nedpevut Dyjfx Ahwsku Material cross-section: 1600 x 2.5 mm² Coil weight: 35.0 t Number of straightening rolls: 13 Straightening roll diameter: 50 mm Blanking line / cut-to-length line (press, coil line, blank stacker) Year of manufacture: 1993 - 2010: new Siemens S7 control system - Schuler press, EBS 4-600-3.6-350 with steplessly adjustable articulated drive, flywheel brake, pneumatic clutch/brake combination, hydraulic overload protection on ram, pneumatic ram counterbalance, motorized ram adjustment, ram locking Sliding table (2x) without rails for transfer table - Schleicher decoiler, HE - 355 - 2100, year 1994 with auxiliary drive, pressure device, traversable - Coil loading station - Schleicher take-off device - Scrap shear - Schnutz straightener, type RME 18/50/13-2000 TZ, year 1994 with steplessly adjustable drive, 30 intermediate rollers, 117 support rollers - Loop bridge - Schleicher roller feeder, type WV-SYS-A 160-2000, year 1994 Blank stacking system / NSM magnettechnik destacking unit Disassembled and stored - video from supplier prior to disassembly available

Kondisi: baru, Tahun pembuatan: 2023, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 61036721, gaya penjepit: 6.500 kN, diameter sekrup: 70 mm, jarak antara tiang: 1.110 mm, volume langkah: 1.078 cm³, tekanan injeksi: 1.877 batang, berat injeksi: 981 g, langkah pembukaan: 3.200 mm, tinggi pelat: 1.540 mm, jenis penggerak: Hydraulisch, bentang bebas: 3.200 mm, berat alat: 2.200.000 g, Injection molding machines directly from the manufacturer! As KraussMaffei, the manufacturer, we are pleased to offer you our inspected and flexible stock machines: The hydromechanical two-platen clamping unit of the GXW series sets new benchmarks in quality and productivity. The sophisticated GuideX slide shoe ensures optimal absorption of force, increasing tooling lifetime. The innovative GearX locking system engages immediately and reliably. Powerful, user-friendly, and value-retaining. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24” TFT color screen, multitouch functionality CLAMPING UNIT - Clamping force kN 6500 - Maximum mold opening force kN 455 - Daylight (H x V) mm 1110 x 960 - Mounting platen (H x V) mm 1540 x 1440 - Mold height (min. - max.) mm 1550 (without center platen) - Maximum opening stroke mm 3200 - Maximum mold open distance mm 1650 - Maximum mold weight kg 22000 INJECTION UNIT 1 SP2000 - Screw diameter / type mm 60 / Thermoplastic - Effective L/D ratio 23.3 - Injection pressure bar 2420 - Shot volume cm³ 792 - Shot weight (max. stroke, PS) g 720 - Injection speed mm/s 140 - Injection flow rate cm³/s 396 - Screw drive speed 1/min 285 - Plasticizing throughput g/s 72.2 - Nozzle contact force kN 82 INJECTION UNIT 2 SP2000 - Screw diameter / type mm 70 / Thermoplastic Nedpfxew U N Ixe Ahwsku - Effective L/D ratio 20 - Injection pressure bar 1877 - Shot volume cm³ 1078 - Shot weight (max. stroke, PS) g 981 - Injection speed mm/s 140 - Injection flow rate cm³/s 539 - Screw drive speed 1/min 285 - Plasticizing throughput g/s 98.3 - Nozzle contact force kN 82 ELECTRICAL PARAMETERS - Connected load kW 341 - Power supply V / Hz 400 / 50 3-phase with neutral conductor WEIGHT AND DIMENSIONS - Net weight t 43.5 - Length x width x height m 11.89 x 3.22 x 2.77 ADDITIONAL EQUIPMENT - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - BluePower ServoDrive - Pneumatic valve 1-fold (BWAP), 1-fold (FWAP) - Pneumatic cascade valves 6-fold (BWAP), 6-fold (FWAP) - Hydraulic core pull 2-fold (BWAP), 2-fold (FWAP) - Mold heating 96-fold (3.5 kW each) - Euromap interface for handling E18 - Euromap interface (central computer) E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) - Graphics analysis package - Sliding table with servo-driven turning unit - Vertical center platen - Parallel clamping and opening movements during injection, with platen parallelism control between FWAP and center platen or BWAP and center platen - ColorForm interface: signal interface for connection of an RPM system - Electrical interface for HRS-Flexflow system - Electrical interface and hydraulic valves for “1-K Dummy Operation” - Interface for connecting a CoMo-Kistler Injection Basic System with good/bad part separation The machine is located at our Parsdorf facility and is available at short notice. Additional options can be offered upon request. We look forward to your inquiry.

Kondisi: sangat baik (bekas), ROVETTA Manufacturer Model: S4-600 Year: 2002 Condition: Used Stock number: 0363-0364-0365-0366 Pressing force: 800 tons Nksdpfxow Hci Io Ahwou Press points: 4 connecting rods Drive system: Link Drive Slide stroke: 900 mm Slide adjustment: 500 mm Slide dimensions: 4,500 x 2,300 mm Table dimensions: 4,500 x 2,300 mm Lateral clearance between uprights: 2,450 mm Usable front opening: 4,500 mm Die height at B.D.C.: Max. 1,500 mm, Min. 1,000 mm Hydraulic safety system: Present Side extraction cart: Present

Kondisi: bekas, Tahun pembuatan: 1970, Press force 1,000 t Column distance 5,000 mm Stroke 500 mm Center height 400 mm Machine dimensions 6,000 x 2,500 mm Weight 1,000 kg Distance between centers 3,500 mm Machine weight approx. 220 t Hydraulic 1,000 ton press Table size 3,500 x 2,200 mm Distance between table and ram: min. approx. 400 mm / max. approx. 1,580 mm Drawing cushion in table with 500 mm stroke and 300 ton counterforce External dimensions approx. 6,000 x 2,500 mm Height approx. 8,500 mm (above floor) Pit depth (for hydraulics and other units): approx. 5,000 mm Total weight approx. 220 tons; the heaviest single component is the headpiece with approx. 64 tons Siemens control Nksdpfxjwwl R Aj Ahweu Equipped with a shear impact damper, the press can also be used for punching (cutting). The side columns have pass-throughs of approx. 1,100 mm width, allowing punching tools to be loaded from both sides with metal strips. For technical data, see images.

Kondisi: bekas, Tahun pembuatan: 2020, Fungsionalitas: belum diuji, tinggi total: 6.400 mm, lebar total: 4.500 mm, panjang total: 3.800 mm, kecepatan operasi: 110 mm/dtk, kecepatan mundur: 180 mm/dtk, tabel jarak ke piston: 1.500 mm, We are offering a newly built machine of the type shown here. The machine was commissioned in 2020 and can be inspected at the customer’s site. Technical Data: - Pressing force: 800 tons - Opening force: 80 tons - Motor power: 55/75 + 55/75 kW - Ram stroke: 1,000 mm - Fast advance speed: 110 mm/s - Working speed: 6 mm/s - Return speed: 180 mm/s - Guide column diameter: 250 mm - Maximum pressure: 250 bar - Usable table area: 3,500 x 2,000 mm - Lower table travel: 2,000 mm - Distance between columns: 2,000 mm - Daylight opening: 1,500 mm - Total front width: 3,800 mm - Total side length: 4,500 mm - Overall height: 6,400 mm - Weight: 134,600 kg The MV-800E/NC-SINCRO press was specifically developed for the setting and testing of molds, dies, and stamps. The four columns, each with a diameter of 250 mm and made from C45E steel, are manufactured for heavy-duty applications. Nsdswlrv Uspfx Ahweku It features an optimized hydraulic system operating at up to 250 bar, ensuring long service life and reliability. The machine complies with all relevant safety and health requirements according to CE regulations. STRUCTURE AND TABLE • Frame designed to withstand 600 tons of concentrated force on 1/3 of its surface. • Lower table with T-slots. • Upper table with T-slots. • Usable table area: 3,000 x 2,000 mm. CYLINDER AND HYDRAULIC SYSTEM • Two double-acting hydraulic cylinders, each with 400 tons force. • Single-stage hydraulic power unit with automatic shut-off of advance speed and independent operation, equipped with a decompression system and proportional pressure pre-fill valves. Digital potentiometers on the upper table for displacement control and an electronic synchronizing system for compensation of off-center or unbalanced loads. • The press is equipped with a lateral pressure switch for optimal pressure adjustment for each job. • Glycerin pressure gauge with tonnage display. ELECTRICAL INSTALLATION AND SAFETY • Electrical system allowing operation with one or two main cylinder advance speeds. • The press offers both manual and automatic cycle modes (activated via a test selector switch): - Manual cycle allows step-by-step execution of all press movements at low speed. - Automatic cycle allows the press to run a complete production cycle. • Electrical safety system for upper table fall protection. • Lower table with hydraulic extraction and mechanical stops. • The machine is equipped with an operator panel featuring a touchscreen display for input of operating and calibration data. • 2 safety light curtains (category IV, 1,000 mm) installed at the front and rear. • Electrical components by Siemens, manufactured to IP55 protection class in accordance with applicable CE regulations and standards. • Electrical and hydraulic functions are redundant and self-monitored. Includes an additional safety block and self-check devices for operation and safety. Includes verification and certification of proper function and safety distance for light curtains. • Safety is ensured by a laser and area protection system with category IV light curtains.

Tahun pembuatan: 1988, Kondisi: bekas, Glass edge grinding machine Knopp type 02-01, year of manufacture 11/88 Nkjdpfx Ahsikn D Nowou

Kondisi: sangat baik (bekas), Tahun pembuatan: 2003, Produsen: ROVETTA Tahun: 2003 Kondisi: Bekas Nomor stok: 0385 Nedpsxlh Rfsfx Ahwoku Daya tekan: 630 ton Jumlah batang penghubung: 4 Langkah slide: 300 mm Penyesuaian slide: 250 mm Celah cetakan pada PMI: 950 mm Jumlah pukulan/menit: 15/65 Bukaan depan maksimum: 5.200 mm Dimensi meja: 5.000 x 2.630 mm Dimensi slide: 5.000 x 2.630 mm Daya motor utama: 132 kW

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, tinggi total: 6.000 mm, tinggi pemasangan: 1.000 mm, lebar total: 2.400 mm, panjang total: 3.500 mm, gaya penekanan: 500 t, lebar meja: 1.500 mm, panjang meja: 2.000 mm, berat keseluruhan: 45.000 kg, kapasitas tangki oli: 1.200 l, Perlengkapan: penghadang cahaya keselamatan, HIDROLIKSAN HCFP – 500 t Hydraulic Tryout / Test Press for Tool and Forming Technology This machine is a tryout/test press specifically designed for tools used in the fields of forming, deep drawing, and toolmaking. It is fully operational, ready for use, and can be inspected and tested under power. Construction features a robust 4-column design, offering a generously sized working area. The hydraulic system is equipped with REXROTH pump technology. Operation and control are provided by a SIEMENS S7-1200 system with touch panel, offering extensive parameter configuration options. Scope of Supply & Accessories - GÜTHLE tool sliding and lifting ball system - Hydraulic foot pedal (GÜTHLE) - Roller block / support console 10 t (GÜTHLE) - 4-channel tool holding system (length 1,500 mm, 2 t per channel) - Complete REXROTH hydraulic unit - Air cooler - Foundation plans / manufacturer documentation Machine Condition - Fully functional - Hydraulic system leak-free and runs smoothly - Controls & electrics in good condition - Mechanically solid, no visible damage - Machine remains assembled and can be demonstrated under power Pressing Force: - Rated force: 500 t - Max. pressing force at 250 bar: approx. 510 t Dimensions & Weight - Approx. total dimensions: 3,500 × 2,400 × 6,000 mm - Approx. total weight: 45,000 kg Working Area - Table size: 2,000 × 1,500 mm - Inner column spacing: 2,000 × 900 mm - Installation height: 1,000 mm - Stroke: 800 mm (linearly adjustable via linear measurement system) - T-slots available (configuration by customer) Hydraulic System Main Cylinders: - Quantity: 2 - Piston Ø: 340 mm - Rod Ø: 280 mm Auxiliary / Plan Cylinders: - Quantity: 2 - Piston Ø: 120 mm - Rod Ø: 70 mm Die Cushion: - Force: 150 t - Cylinders: 2 × Ø 310 × 210 mm - Stroke: 400 mm Pumps and Tank Nsdpfx Aex D Tv Dshwoku - Pump: REXROTH axial piston, 100 ccm, approx. 150 L/min - Hydraulic tank: 1,200 L - Oil system: 1,000 L capacity Speeds - Advance stroke: 120 mm/s - Return stroke: 150 mm/s - Working / press stroke: 12 mm/s Control & Safety - Controller: SIEMENS S7-1200 + ET200S - 12" Schneider Electric touch panel Operating modes: - Two-hand automatic - Setup mode - Single stroke - Stroke without die cushion - Deep-drawing mode with die cushion Measurement & safety components: - Novatechnik linear measuring system (63 bit) for slide & die cushion - SICK light curtains front and rear (height: 1,050 mm) - Side safety fences with limit switches - Remote maintenance via Ethernet possible - Mobile control panel International Notice Block (DE/EN) German Dismantling, deinstallation, loading and transport are carried out exclusively by the buyer, at the buyer’s cost and risk. The seller does not provide equipment, personnel, or loading assistance. Collection is only possible by prior appointment. English Dismantling, deinstallation, loading and transport are the sole responsibility of the buyer and at the buyer’s cost and risk. The seller does not provide personnel, equipment, lifting devices, or loading assistance. Pickup must be scheduled in advance. Sale is EXW (Incoterms 2020). Location: Saxony, Germany

Kondisi: bekas, Tahun pembuatan: 2011, jam operasional: 1.000 h, Fungsionalitas: berfungsi sepenuhnya, tinggi total: 4.200 mm, tinggi meja: 700 mm, lebar total: 3.000 mm, panjang total: 2.000 mm, gaya penekanan: 1.200 t, lebar meja: 3.000 mm, panjang meja: 2.000 mm, berat keseluruhan: 60.000 kg, lebar pelat tuas: 800 mm, panjang pelat penekan: 600 mm, tabel jarak ke piston: 700 mm, jenis arus masuk: tiga fasa, jarak antara penyangga: 2.200 mm, panjang langkah: 600 mm, kapasitas tangki oli: 700 l, lebar kabinet kontrol: 400 mm, tegangan masuk: 380 V, tinggi kabinet kontrol: 2.000 mm, Perlengkapan: penghadang cahaya keselamatan, Rangka H, 4 kolom, cahaya 700 mm, langkah 600 mm, jarak antar kolom 2200 mm x 1260 mm, dimensi (PxLxT) 3000x2000x4200 mm, 380V-15 kW, berat 60.000 kg Nkodpoxn Rvcofx Ahweu