Mesin bor radial

GIRARDS radialbohrmaschine

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Screening area: approx. 1,300 x 4,000 mm Iedjtpgvxepfx Akpeic new semi-mobile steel construction

Kondisi: bekas, Radial drilling machine CSEPEL Type RFh 75 / 1500 Iijdpfolhwr Rex Akpsc Machine no. 13704 Year of manufacture: 1985 Drilling capacity in steel: Ø 75 mm Drilling capacity in cast iron: Ø 90 mm Spindle taper: MK 5 Nominal arm reach: 1500 mm Maximum spindle reach: 1500 mm (to column) Minimum spindle reach: 440 mm (to column) Distance spindle nose – clamping surface: 370 - 1700 mm Arm vertical adjustment: 950 mm Table size / clamping surface: 1800 x 1100 mm Column diameter: 450 mm Quill stroke: 380 mm Spindle speed: 19-1900 rpm, 21 steps Feed: 0.047-2 mm/rev, 12 steps Motor power: 11 kW Power supply: 380 Volt, 50 Hz, 15 kW - Clockwise/counterclockwise rotation of the drilling spindle via hand lever switch - Hydraulic gear shifting for spindle speed and feed rate - Hydro-mechanical central clamping - Motorized arm height adjustment - Without coolant system - Machine lamp - Operating manual Required space: Length 2720 mm x Width 1170 mm x Height max. 3770 mm Transport height with motor on column: 3500 mm Transport height without motor on column: 3250 mm Weight: 6.3 t Good condition

Kondisi: bekas, Tahun pembuatan: 2022, jam operasional: 4.561 h, Fungsionalitas: berfungsi sepenuhnya, Basic Package AK565: Central axle trailer chassis with 2 axles, 80 km/h road approval Brake system incl. ABS and lighting according to EC directive 50 mm EC towing eye incl. slip-on shoe Tyres 385/65 R22.5 Hydraulically adjustable support leg Splash guards (inner and side-mounted mudguards) Permissible total weight 19,000 kg MTU diesel engine 6R1300, 390 kW at 2,000 rpm, complies with EUROMOT V emissions standard Exhaust gas directed upwards Load-dependent metering control including automatic scraper floor reversal Fuel tank 450 litres Feed roller: length 1,690 mm, diameter 510 mm, fitted with removable tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable "Dopplock" flail tips Standard: flail tip “Streusel plus” Centrally arranged wear strips Iiedpfx Aksyhckmjpsc Electric pump for actuating cylinder functions (e.g. raising/lowering support leg and opening/closing rear basket, folding in/out rear conveyor, releasing drive system) when engine is off 24 V electrical control Separate control panel at the rear of the machine Hydraulically folding fine-shredding basket “Multimesh” (mesh size between 30 - 280 mm, gradations on request) incl. one-piece rear door Scraper floor with 32 bars Chain drive feed roller and scraper floor Complete radio remote control Drive system preparation Rear conveyor 4 m, 1,800 mm wide "classic" Non-magnetic center section on rear conveyor Reinforcement plates in the feed hopper (material: Hardox) on both sides for side wall Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paint finish: RAL2011 deep orange Additional Equipment: Hydrostatic drive Fuel tank 600 l Flail tip C1 “bear claw” with carbide Rear conveyor 4 m, belt width 1,800 mm, lowerable Neodymium magnetic pulley incl. chute Separate drive for feed roller and scraper floor - "Twin Drive" Duomatic coupling Smooth impact plate Fine-shredding basket Delivery date to be agreed

Kondisi: baik (bekas), 1 used radial drilling machine Manufacturer: Stimin Model: GR 820 H Serial No.: 773 Year of manufacture: 2004 Technical specifications: Drilling capacity: 80 mm Arm reach: 1600 mm Drill spindle taper: MK 6 Drill spindle stroke: 390 mm Spindle speeds: 24 steps, 20 - 1400 rpm Right- and left-hand rotation Feed, 12 steps: 0.045 - 1.5 mm/rev Drive: 400 V / 14.5 kVA Electromechanical clamping of arm and drilling unit Distance from machined machine bed to drill quill: min. approx. 400 mm max. approx. 1800 mm Usable machine bed with 4 T-slots: 1170 x 2185 mm Coolant system Iiedpetzctmefx Akpoc 2 clamping tables Space requirement approx. L 2600 x H 3950 x W 1300 mm Weight approx. 8,500 kg

Kondisi: bekas, Tahun pembuatan: 1982, Technical Details: Faceplate diameter: 2,600 mm Swing diameter over cross slide: 2,500 mm Turning length: 450 mm Distance between centers: 1,600 mm Swing diameter over bed: 2,900 mm Spindle bore: 100 mm Spindle speeds: gear steps (rpm) Feed range: Longitudinal turning 0.12–31.5 mm/min; facing 0.12–45 mm/min Bedway length: 2,900 mm Workpiece weight between centers, max.: 400,000 kg Iodpfewtctyjx Akpoic Total power requirement: 45 kW Machine weight approx. (all components included): approx. 29.0 t Machine dimensions (LxWxH): 5.2 x 5.0 x 3.1 m 3-axis measuring system with RSF electronics digital readout Control panel Cooling unit for control cabinet (Rittal)

Kondisi: sangat baik (bekas), Tahun pembuatan: 1955, Drilling capacity in steel St 37 Ø 65 mm Drilling capacity in cast iron Ø 75 mm Spindle taper MK 5 Arm reach 1250 mm Spindle stroke 400 mm Spindle speeds 22.4 – 1800 rpm Feed range 0.056 – 0.56 mm/rev Column diameter Ø 300 mm Motor power, 2-stage 3.6 / 4.8 kW Clamping surface, base plate 1320 x 1000 mm Dimensions L x W x H (with motor!) 2250 x 1000 x 3100 mm Transport dimensions L x W x H (without motor!) 2250 x 1000 x 2800 mm Weight 5100 kg Accessories / Special features: • Cube table L x W x H 650 x 500 x 500 mm • Central clamping • Power feed Isdpfx Aotwzk Dekpsic • Forward/reverse run • Motorized height adjustment • Wide speed range up to 1800 rpm • Coolant system • Lighting Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Radial drill, Csepel RFM 51, mesin bekas Pembongkaran mesin menjadi tanggung jawab pembeli. Pabrikan: Csepel Model: RFM 51 Panjang sumbu X: 4000 mm Perjalanan lengan: 3100 mm Radius: 2460 mm Jarak dari dasar ke spindel: 1660 mm Kapasitas pengeboran baja: 100 mm Kapasitas pengeboran besi cor: 120 mm Iijdpfewcqlcjx Akpjc

Kondisi: bekas, en_US: Technical Details: Drilling capacity in steel (diameter): 40 mm Throat depth: 360 mm Drilling stroke: 280 mm Spindle taper: MT 5 Spindle speed: 32 - 1400 rpm Feed: 0.11 - 1.73 mm/rev Connected load: 6 kW Max. distance spindle/table: 750 mm Table clamping surface: 780 x 650 mm Drill table adjustment: vertical 800 mm Column diameter/size: 230 x 950 mm Machine dimensions (LxWxH): approx. 1.1 x 0.8 x 2.8 m Isdpowid Uwsfx Akpeic Machine weight: approx. 1.5 t For right and left-hand thread cutting with reversing feature *

Kondisi: bekas, Tahun pembuatan: 1970, Radial drilling capacity in steel (diameter): 32 mm Arm reach: 1000 mm Maximum workpiece height: 1400 mm Total power requirement: 6 kW Machine weight: approx. 3,700 kg Space requirement: approx. [missing value] WEBO Radial drilling machine Model: BR 32 V Year of manufacture: approx. 1970 Serial no. _____ Drilling capacity in cast iron/steel (solid): max. 40 / 32 mm Boring (with 50% pre-drilling): 60 / 80 mm Arm reach: approx. 1,000 mm Spindle taper: MT 4 Quill stroke: 350 mm Spindle speeds, 3 ranges/stepless: 60 - 1,850 rpm Base plate: 1,200 x 930 mm Installation height under the spindle: 200 - 1,400 mm Swivel radius: 360° Vertical adjustment of arm: 980 mm Horizontal movement of drilling saddle: 1,640 mm 9 feed rates: 0.06 – 1.0 mm/revolution Spindle drive: approx. 3 / 4 kW Total drive: 6 kW - 380 V – 50 Hz Weight: approx. 3.7 t Iodpfxst H Smyj Akpoic Accessories / special equipment: • Manual mechanical clamping of arm and spindle box via hand lever • Automatic feed with depth stop via vernier • Stepless speed control within three gearbox ranges and two motor speeds, adjustable via hand lever • Right and left hand rotation • Electro-motorized vertical adjustment of the arm via cross switch • Ammeter for drilling motor • Coolant system with integrated coolant pump • Fixed drilling table, approx. 800 x 600 x 600 mm (height), vice, etc. Ideal machine for steel construction, toolmaking, and mechanical engineering! Condition: Older but good to very good – ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Kondisi: sangat baik (bekas), jarak tempuh: 59.200 km, daya: 250 kW (339,91 hp), pendaftaran pertama: 12/2024, jarak roda: 4.200 mm, warna: merah, tipe perpindahan gigi: otomatis, Tahun pembuatan: 1998,