Mesin pemutar batang bermotor

GLASER GDM 3-0 + GBR 666

Tahun pembuatan: 1979, Kondisi: bekas, Outreach: 22/29 mm Iajdpfozif Ssx Aa Dew Drive motor: approx. 0.55 kW at 380 V Required space: 450 x 500 x 560 mm Weight: approx. 6.5 kg Pressing force: 30 kN

Tahun pembuatan: 2026, Kondisi: baru, Washing line for fruit and vegetables. The unit is constructed entirely from stainless steel. It features a sorting grid, washing tank, and conveyor belt. The fruit drops into the water and, after pre-washing, is conveyed by the belt where it is thoroughly cleaned with fresh water. The cleaned produce is then transferred to the mill, where various sieves can be used to achieve the desired mash consistency. The washing line is equipped with a dosing attachment for packing presses. Technical data: • Rated output: 1,500 kg/h • Power requirement: 3 kW, 400 V, 16 A • Material: Wnr. 1.4301, AISI 304 stainless steel • Washing tank water capacity: 120 L/shift • Water consumption: 12 L/min • Water connection: 3/4” quick coupling • IP65-rated electrical control box • Pivoting grater mill • Fitted with mobile castors • Easy to clean • Through the frequency converter, the conveyor throughput can be easily adjusted Dimensions: Length: 3,250 mm Iaedpfx Aastu Ikco Dow Width: 840 mm Height: 2,270 mm Weight: 200 kg

Kondisi: baru, Round bar: 30 x 1 mm Square tube: 30 x 30 x 1 mm Solid round bar: 16 mm Solid square bar: 30 x 10 mm Rotation speed: 9 rpm Total power requirement: 1.1 kW Machine weight: approx. 0.32 t Space requirement: approx. 0.82 x 0.60 x 1.26 m Electric profile bending machine with Iajdeh D Svnepfx Aa Djw - 5 sets of rollers: 2x for round bar (20 mm and 30 mm), 1x for flat bar, 1x for square bar, 1x for ? - Foot switch with emergency stop

Kondisi: sangat baik (bekas), de-to-hu Iedpfx Aaolkgvbj Dsaw

Tahun pembuatan: 1995, Kondisi: baik (bekas), nomor mesin/kendaraan: 044092, Offer 22148 Technical Specifications: - Grinding wheel diameter: approx. 200 mm - Grinding wheel width: approx. 25 mm - Grinding wheel bore: approx. 51 mm - Wheel speed: 1450 rpm - Drive: 400 V / 0.7 kW Iaedpfxoiba R Ne Aa Dew - Space requirement: approx. W 600 x H 400 x D 350 mm - Weight: approx. 30 kg - Console for wall mounting

Tahun pembuatan: 2020, Kondisi: baru, Transport systems Depending on the customer's requirements, transport systems can be either floor-based or suspended from rails. - For convenient solutions in manual installations, we recommend suspended cross-transfer systems (lateral transport). - In automated systems, chain conveyors are most commonly used. These systems operate continuously without stopping, making them an excellent solution for businesses focused on process quality and repeatability. - For companies manufacturing a variety of products simultaneously, such as those with multiple booths for different paint colors, flexible solutions using power-and-free conveyors are implemented. This is the most expensive option. All installations are custom-made according to customer requirements. Continuous suspended chain transport systems are designed and manufactured to the client’s specifications. Within this system, it is also possible to provide floor conveyor systems to transport items such as flowerpots or rims (see photo). ROMER also manufactures suspended transport systems. Cross-transfer units are engineered and built to meet the demands of specific installations. Photoelectric cell application The use of a photoelectric cell in the detail zone allows for measurement of the part’s length, enabling the automatic activation of spray guns when the part is within range and their immediate deactivation after coating. The photoelectric cell is supplied as standard equipment. Detailed recognition using special markers. Iaedpfofz U S Esx Aa Dsw Above the carrier there are plates with identification holes. In conjunction with the photoelectric cell, the PLC controller identifies coated workpieces, turning the spray guns on and off at the correct times—saving both energy and powder. Vertical shape detection. By using light barriers with horizontal sensors, the PLC controller can also analyze the vertical shape of a component. The PLC controller times the appearance of the part in the gun zone, allowing for selective activation or deactivation of spray guns. With multi-sensor horizontal and vertical light barriers, This solution enables precise measurement of workpiece dimensions, allowing for the control of manipulators as well.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, jam operasional: 50 h, Fungsionalitas: berfungsi sepenuhnya, For sale is a welding robot system with the following components: Iaodpjv Dvlljfx Aa Dew Elite Robot CS620 (1750mm reach) with programming flange and software Fronius TPSi 500 rotateZERO 500 positioner with 1800mm x 800mm intermediate frame Machine base frame The system is immediately ready for welding.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2024, diameter poros: 50 mm, diameter rol: 155 mm, berat keseluruhan: 400 kg, daya: 1,5 kW (2,04 hp), tegangan masuk: 400 V, Perlengkapan: dokumentasi / manual, henti darurat, Brand: Sahinler Model: PK 35 Year of manufacture: 2024, unused Power capacity (kW): 1.5 Voltage: 400 V Frequency (Hz): 50 Dimensions LxWxH (mm): 1000 x 750 x 1400 Weight (approx. kg): 400 Units in stock: 4 Manufactured in: Turkey Ø Diameter (mm): 50 Comments: Unused machines at competitive prices, multiple units available in stock, foot pedal included. Iaedpjwt Sy Ajfx Aa Dsw

Kondisi: bekas, Tahun pembuatan: 1987, Pressure: 160 t Bending length: 4000 mm Iaodjtqqr Repfx Aa Djw Frame gap: 3060 mm Control system: FORTRON CNC 10 H 4 Throat depth: 280 mm Stroke: 250 mm Installation height: 500 mm Table length: 4050 mm Table width: 280 mm Descent speed: from 70 mm/sec Return speed: 68.4 mm/sec Working speed: 9 / 3.5 mm/sec Max. operating pressure: 205 bar Oil capacity: 400 l Total power requirement: 19.5 kW Weight of machine: approx. 20.8 t Total weight incl. accessories: 22 t Machine dimensions (L x W x H): 4.8 x 1.88 x 2.93 m Control cabinet dimensions: 1.6 x 0.5 x 2.25 m - 3-axis machine - with crowning - with graphic display Accessories: programmable backgauge, upper and lower tooling, table extensions

Kondisi: baru, Horizontal bending machine Fastech FP 40 Description • Pressure: 40 t • Stroke: 285 mm • Max. tool height: 250 mm • Flat bar on the vertical edge: 200 x 24 mm • Working speed: 10.0 mm/sec • Return speed: 10.0 mm/sec • Working height: 930 mm • Table: 660 x 1250 mm • Total power requirement: 4.0 kW • Motor: 400 Volt 50 Hz • Weight: 1100 kg • Dimensions (L x W x H): 1250 x 650 x 1250 mm • Oil capacity: 40.0 l Features: • Hydraulic horizontal bending machine • Solid working table made of stabilized steel • Machine constructed from hardened and ground forged steel • Digital stroke adjustment display • 1x tool set Iasdpfefg Eu Rox Aa Dow • Double foot switch