Pompa pelukis

Graco Merkur 30:1 wall

Kondisi: bekas, Tahun pembuatan: 1994, Technical details: Production output: 2x 4.8 MW Number of generators: 2 units Fuel tank volume: 480 m³ Fuel type: Gas + Oil Rjdju Nxatspfx Ahwop Complete power plant Major overhaul at the end of 2005: - 2 combustion engines, 12-cylinder V-engines from Maschinenwerke Halberstadt, type: 12 VDG 48/42 AL - suitable for GAS and OIL 2 generators by Leo Somer with: - Electrical output: 4.6 MW each - Mechanical output: 4.8 MW each (approx. 6,500 HP) - Thermal output: 4.8 MW each 2x heat recovery boilers: - Power feed: medium voltage 10 kV (directly into the grid) Further equipment: - Heat exchanger, catalytic converter, control room, medium-voltage network, oil processing systems, intermediate tanks + fuel storage tanks 4.8 m³

Kondisi: sangat baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2022, jam operasional: 11.500 h, nomor mesin/kendaraan: 3098, jam kerja laser: 6.900 h, daya laser: 10.000 W, ketebalan lembaran (maks.): 30 mm, ketebalan pelat baja (maks.): 30 mm, daya: 10 kW (13,60 hp), tahun perombakan terakhir: 2024, jangkauan kerja: 4.020 mm, Perlengkapan: dokumentasi / manual, penghadang cahaya keselamatan, unit pendingin, MSF Pro 4001.20LB MicroStep CNC cutting system from the MSF Pro series, equipped with the following features: • 2D laser cutting head with an IPG YLS 10000 U fiber laser source • Fully automatic shuttle table Rsdovw Tdljpfx Ahwjp • Fully automatic HSK 63 drilling spindle • High-performance Donaldson DFPRO 6 filtration system with 7.5 kW power Technical data: Machine model: MSF Pro 4001.20LB Working area: approx. 4,000 x 2,000 mm Guideways: high-precision linear guides Drives: maintenance-free Panasonic AC servo motors Traverse speed: up to 100,000 mm/min Measuring system: IRC 2500 (incremental encoder) Z-axis positioning speed: 18 m/min Z-axis travel range: 150 mm Z-axis acceleration: 0.75 G Positioning accuracy (Pa*): 0.07 mm according to VDI/DGQ 3441 Repeatability (Ps*): 0.03 mm according to VDI/DGQ 3441 Ambient temperature: +10 °C to +35 °C Relative humidity: 0 to 90 % Laser cutting head: EX-TRABEAM® Pro Cleaning and calibration station (LU3K) Automatic nozzle changer (8 nozzles) Fully automatic drilling spindle Technical data: Drilling range: Ø 4 mm - Ø 30 mm Tapping range: M5 - M20 Max. material thickness: up to 25 mm* Power: 21 kW Speed: up to 10,000 rpm Tool cooling: internal cooling Tool change: automatic Automatic tool measurement Pneumatic hold-down device Chip removal brush Donaldson® filter unit DFPRO 6 Cyclopeel Fan capacity: 7.5 kW Airflow: 4,500 m³/h Asper Nesting® | Automatic nesting software With Witt gas mixer The machine has always been operated with a maintenance and support contract.

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, jenis bahan bakar: diesel, warna: hijau, berat keseluruhan: 12.900 kg, berat muatan maksimum: 3.800 kg, tinggi angkat: 15.740 mm, Tahun pembuatan: 2007, jam operasional: 6.100 h, nomor mesin/kendaraan: Roto 38.16, Perlengkapan: Pemeriksaan keselamatan UVV, garpu palet, hidrolik, penggerak semua roda, Rotating Telescopic Handler Technical Specifications Working height: 15.74 m Lateral reach: 12.98 m Slew range: 415° Rodpfx Ahetucp Towep Length: 6.24 m Width: 2.24 m Clearance height: 2.85 m Lifting capacity: 3,800 kg Platform capacity: 300 kg Total weight: 12,900 kg Outriggers: Swing-out supports Drive: Diesel Attachment: Forks License class: 3/B Inspection/schedule Safety inspection (UVV) valid until: 11/2025 Operating hours: 6,100 hrs as of 02/2024 Interested? We are always happy to assist you. You can reach us Monday to Friday from 7:00 am to 4:00 pm! Stated price plus statutory VAT. Specifications subject to change and errors excepted!

Kondisi: siap digunakan (bekas), Tahun pembuatan: 1999, Fungsionalitas: berfungsi sepenuhnya, CNC plano-milling and boring machine – quill with rotary-traverse table Manufacturer: SKODA / Model: W200 Base unit year: 1986 / Retrofit to CNC by SKODA in 1999 Rsdpfx Ahowxyxqewjp The machine can be inspected by appointment. Technical specifications: Travel paths: - X-axis: 8,000 mm - Y-axis: 4,150 mm - W-axis: 2,000 mm - Z-axis: 1,600 mm Spindle: - Spindle diameter: 200 mm - Tool taper according to DIN 2080 AD, ISO 60 - Spindle speed: 0.0 – 930 rpm - Spindle drive power: 77 kW Boring and rotary-traverse table: - Manufacturer: SCHARMANN - Table clamping surface: 6,000 x 4,000 mm - V-axis: 2,000 mm - Max. table load: 80 t - B-axis: 360°, indexing: 0.001° Equipment: - CNC control: SIEMENS Sinumerik 840 CE - Chip conveyor - ... No guarantee on completeness or accuracy of technical information or equipment details. Subject to prior sale. A detailed technical data sheet and information about the equipment are available on request.

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2024, kapasitas angkut: 5.000 kg, tinggi angkat: 25.000 mm, jenis bahan bakar: diesel, tipe tiang: simpleks, panjang garpu: 1.200 mm, jenis penggerak: Diesel, Rotating telehandler Mast type: Quattro Condition: New machine Technical condition: New Front tyres type: Pneumatic Front tyres condition: 80 - 100% Rear tyres type: Pneumatic Rjdow Eqdkspfx Ahwop Rear tyres condition: 80 - 100% Description: The vehicle undergoes UVV (accident prevention regulation) inspection. A&M pallet fork carrier set including 1200mm pallet forks, 1500mm pallet fork carriage, and 5t load hook included. 3rd valve, 4th valve, heater, German road approval (STVZO), full cab, CE certificate, 3rd valve, 4th valve, heater, STVZO, full cab, CE certificate, TÜV/Dekra homologation, 20 km/h, 45% locking differential on second axle, two front swiveling LED lights on cab, two rear swiveling LED lights on cab, set of additional stabilizer platforms, 455/70 Michelin wheel set, standard carriage plate, remote control with 2 joysticks, automatic wheel alignment, kit for driving with upper carriage rotated by 180 degrees, wired reversing camera, 3-sided personnel basket 120 x 240 cm, 5.0 t winch to be mounted on the carriage. Including work basket and winch.

Tahun pembuatan: 2013, Kondisi: baik (bekas), Plasma cutting and extraction table, dimensions 2,500 x 6,000 mm. Gantry bridge. Carriage with servo drives (for positioning the gantry bridge in the X-direction). Machine track, length 8 m. HEB450 profiles for the machine track foundation, 8 m. Plasma cutting unit Hypertherm HPR 400XD, 1 unit. Plasma bevel cutting unit including automatic torch height control system. Fume extraction unit Filtercube 4H for plasma cutting system. Oxy-fuel cutting torch, 3 units. Automatic height control system IHT M4000 CAP for oxy-fuel cutting unit, 3 units. Torch suspension for oxy-fuel torch (motor-driven). Torch suspension Single Drive for oxy-fuel torch, 2 units (with automatic torch positioning). Laser pointer (for torch alignment and positioning). Computer control system (consisting of an industrial PC and a control panel). Control software 'VACAM Machine Edition' (including VaCad and VaNest software and online support). Automatic nesting software Sigmanest "Powerpack" (including 3 days of training for max. 3 persons at Voortman Holland (excluding travel and accommodation expenses) and 1 day online support). Rjdpfx Aetp Dhpshwop Emergency stop with stop cord. Year of manufacture: 2013.

Tahun pembuatan: 2021, Kondisi: baru, nomor mesin/kendaraan: 2021102613, Aluminum angle conveyor belt with substructure Conveyor belt length: 2000mm flat + 2200mm inclined Incline angle at bend: 45° Discharge height: approx. 1800mm Height of the horizontal section: 200mm top edge PU conveyor belt Conveyor belt EM 9/2 0+05 PU petrol matte Belt width: 500mm Redpfx Ash Eld Eshwjp 21 pcs. T30 cleats welded – pitch 310mm * Antistatic due to threads in the running side fabric Endless welded with stepped finger splice 40mm wave edge on both sides, high-frequency welded * Edge-free zone on both sides for belt tracking on the incline Continuous support plate Drive: Motor approx. 1.1 kW Belt speed approx. 0.4 m/sec * Optional frequency inverter control Connection 220/400V, 50Hz, protection class IP54

Kondisi: baru, 966b9f65-24aa-4beb-8495-975d1f131eaf Redpfx Ahsgvkktewep

Kondisi: bekas, Tahun pembuatan: 2016, nomor mesin/kendaraan: 0605-240010, FICEP Flex FRC 1201 Notching System The Ficep FRC 1201 notching and cutting system is part of the modern Ficep Flex series of notching machines. This state-of-the-art CNC-controlled notching system is designed for fast thermal cutting and notching of H / U / L / flat profiles and square tubes. The steel profile is positioned at the cutting location in the machine using a pulling gripper carriage along the roller conveyor. A robotic arm fitted with cutting units (oxy-fuel or plasma) performs the cuts or notching operations at the selected position. The cut or notched, finished components either drop into the collection tray or are pushed out of the system by the measuring arm. Thermal Cutting Units: This Ficep Flex FRC 1201 beam notching system is equipped for thermal cutting using oxy-fuel and/or plasma. A Hypertherm HYPERFORMANCE PLASMA HPR 260 XD serves as the plasma power source, suitable for material thicknesses up to 32 mm. Thicker material sections or phase cuts over 32 mm are handled by the oxy-fuel cutting unit. Transport System: On the infeed side before the Ficep Flex FRC notching system, there is a chain-drag transverse conveyor with a length of 11,150 mm. The profiles (workpieces) can be conveyed in both directions. The profiles are then moved into the machine on a sturdy roller conveyor with a gripper carriage. Rodpfx Ahstwm Ubowop The system is designed for profiles up to 12 m long and therefore features 12 m roller conveyors on both the infeed and outfeed sides, each with a roller conveyor width of 1,300 mm. For removal of finished parts on the outfeed side, there are four chain-drag transverse conveyors each 6,450 mm long located after the notching system. Mitrol CNC Control and Pegaso Software: The system is controlled by a modern CNC controller from Mitrol. The reliable CNC control unit is produced by Ficep's in-house supplier Mitrol and operates with Pegaso software, including remote maintenance capability and data transfer interface. Torit DCE Filter Unit: The extraction filter unit is from Donaldson Torit DCE. Safety: Perimeter fencing and light barriers Max. profile cross-section: 1,220 x 600 mm Min. material length: 2,500 mm Working height: 865 mm Weight: 7,000 kg Weight of burner unit cover: 1,200 kg This modern Ficep Flex FRC 1201 notching system is in very good condition.

Tahun pembuatan: 2017, Kondisi: sangat baik (bekas), ABL Fruit Chunker in ausgezeichnetem Zustand. Hat Früchte wie Ananas, Melone und Orangen verarbeitet. Neu gekauft im Jahr 2017. Wir haben außerdem 2 x AP15 Schälmaschinen separat verfügbar. Rjdonfvi Espfx Ahwjp