Salin router

GRAF Synergy F104/3

Kondisi: sangat baik (bekas), The SB-10 grinding machine enables flawless grinding of boring bars, threading tools, parting tools, or boring rods made from HSS or carbide, for use in jig boring machines or lathes. By adjusting the rake angle to match the material, you achieve optimal tool performance and extended tool life. Nowadays, these boring bars are still often ground manually before being used on high-quality machine tools. On the SB-10, the tools are ground using a profile wheel with a custom-shaped grinding wheel edge. The desired profile is easily achieved with a dressing diamond and a template mounted on the machine. For excellent stability and surface quality, the horizontal slide runs on cross-roller guideways. Grinding wheel (ØxWxB): 125 x 20 x 20 mm Speed: 2800 rpm Longitudinal travel: 130 mm Cross travel: 80 mm Bsdpfxjfqicxo Abhewh Height adjustment: 65 mm Rake angle: +25° to -10° Dimensions WxDxH: approx. 550 x 450 x 650 mm Weight: approx. 70 kg

Kondisi: baru, Tahun pembuatan: 2025, New machine Year of manufacture: 2025 Description: Technical Specifications Working width: 630 mm Worktable dimensions: 640 x 1000 mm Working height: - Maximum: 300 mm - Minimum: 3.5 mm Max. cutting depth per pass: 8 mm Min. workpiece length: 260 mm Cutter block diameter: 120 mm 4 knives: 35 x 3 x 640 mm Cutter block speed: 4500 rpm Feed speed, electronically adjustable: 4–20 m/min Feed motor (S6 - 40%): 1.3 kW Extraction port diameter: 150 mm Standard Equipment and Accessories - Automatic thickness table lift with 2 speeds and micrometer positioning - Thickness table with vertical movement via 4 high-precision steel spindles - Electronic 2-axis control system for: * programmed thickness table dimension * feed speed - Infinitely variable feed speed from 4 to 20 m/min regulated electronically via inverter - Automatic feed speed adjustment relative to the main motor's maximum power consumption - Upper ribbed steel infeed roller - Two upper rubber-coated outfeed rollers - Interchangeable feed rollers - Independent pneumatic pressure adjustment for upper feed rollers - Motor output 9 kW 50Hz (11 kW 60Hz) with automatic star-delta start: * S1: 7.5 kW / 10 HP at 50 Hz (8.8 kW / 12 HP at 60 Hz) * S6 - 40%: 9 kW / 12 HP at 50 Hz (11 kW / 15 HP at 60 Hz) Bedpfxew Tfybe Abhswh Safety/Protection - Noise-absorbing protection at infeed and outfeed - Micro safety switch on the protective hood - Emergency stop at the front and rear of the machine - Lockable main switch - Motor protection switch - Low voltage circuit (110 Volt) - Automatic motor brake - EC Declaration of Conformity Production code: S 7 109999 Standard safety regulations 530314 TERSA cutter block (monoblock design) with reversible knives 083201 Base frame 930731 400V EU R02017 L’invincibile S 7 CE version 931201 Frequency 50 Hz 109993 MACHINE LANGUAGE: German Availability: short-term Location: Flörsheim

Kondisi: baru, Bevel-cutting saw automation UK-450 - Saw blade diameter: 450 mm - Processing length according to customer requirements - Automatic positioning - Automatic mitre angle adjustment (up to +/- 60°) - Application areas: woodworking, plastics and aluminium processing - Infeed track as smooth table (optionally as roller conveyor) Bwodpfsd A Ttxsx Abhoh Further technical specifications and detailed information available on request.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, The machine is in excellent condition, having performed only 123,000 operations. CNC-controlled automatic system, designed for processing welded frames. Independent drive and control system. Multiple use of the same cycle time Operates in conjunction with a welding and cleaning line Does not require additional floor space in the workshop After adaptation, it can operate in a sash production line. All operations are performed during the cooling phase: - Water drainage - Ventilation, grooves - Ventilation, drilling in colored profiles - Mullion connector drilling in the frame Bedpfsm Ak R Uox Abhswh - Hinge hole drilling in the frame (x6) The center is equipped with its own system for transporting frames from the welder to the cleaner. SPS and NC controls. User-friendly visualization.

Kondisi: baru, The Brugger SA38 saw and split machine impresses with a remarkable splitting force of 12 tons, making it the ideal solution for the quick and straightforward processing of logs into high-quality firewood. Effortlessly, logs with a diameter of up to 38 cm can be transformed into firewood. The SA38 stands out for its simple yet well-engineered design, which not only ensures high reliability but also makes maintenance and repairs easier. Technical Specifications • Up to 38 cm log diameter Bjdpfxepz I I Hs Abhswh • Splitting force of 12 tons • 50 cm Oregon bar • Log length: 20 – 50 cm • Optional log lifter or chain conveyor available • Weight: 450 kg Depending on your specific requirements, various drive options are available, including a powerful 14 HP Kohler petrol engine, a 7.5 kW 400V electric motor, or a PTO drive with three-point linkage. Prices Brugger SA38 Base – €5,499 Feed conveyor 100 cm – €590 Discharge conveyor 350 cm – €895 6-way splitting wedge – €199 Additional PTO drive (for electric or petrol versions): €949 Chain conveyor – €1,898 Log lifter – €1,498

Kondisi: bekas, jarak tempuh: 166.000 km, daya: 96 kW (130,52 hp), pendaftaran pertama: 11/2012, jenis bahan bakar: diesel, berat keseluruhan: 3.500 kg, warna: putih, tipe perpindahan gigi: mekanis, kelas emisi: Euro 5, jumlah tempat duduk: 3, panjang ruang muatan: 3.850 mm, lebar ruang muat: 2.040 mm, tinggi ruang muatan: 400 mm, Perlengkapan: ABS, kunci sentral,

Kondisi: hampir baru (bekas), Tahun pembuatan: 2022, * Mesin pembersih CNC dilengkapi dengan dua pisau reversibel untuk putih dan lapisan, serta bilah untuk pembersihan berbagai bentuk profil dengan pergerakan pada dua sumbu yang dikontrol. * Pemasukan dan penempatan profil secara otomatis berkat alat centering yang bekerja pada sensor jarak, memastikan presisi dan akurasi. * Dimensi profil maksimum yang dapat diproses: maksimum 190 mm tinggi dan minimum 35 mm. Bwsdpfx Aewbqkpebhoh * Panel layar sentuh 4” yang intuitif, dengan kemampuan menyimpan hingga 99 program kerja.

Kondisi: baru, The solution for shredding large, long pipes and profiles. The ZRS series is specifically designed for the size reduction of pipes with diameters up to 1,300 mm and made from various materials such as PE, PP, and PVC. These machines are capable of shredding plastic pipes up to 9 meters in length directly, without the need for pre-cutting or sawing. The centerpiece is a rotor with diameters up to 1,500 mm, which can be equipped with up to 206 cutting crowns and shreds material gently at low rotational speed. The pipe is loaded into a closed feed trough, where it is pressed against the rotor by a hydraulic pusher. The pre-shredded material is then conveyed by the shredder via a conveyor belt to a granulator. The granulator processes the material into regrind directly suitable for further processing. Bedpeghgd Ijfx Abhjwh The entire system is operated automatically via a central control unit. Additional benefits of the system include low energy consumption, avoidance of power peaks, and the minimization of accident risks during pre-shredding.

Kondisi: baru, Tahun pembuatan: 2024, ♻ Universal application (wood, pallets including nails and staples, wood fibreboards and scrap pieces, veneers, MDF boards, plastics, etc.) Bwedohwwpzspfx Abhsh ✔ Motor power: 22 kW ✔ Rotor length: 650 mm ✔ Rotor diameter: 270 mm ✔ Rotor speed: 80–120 rpm ✔ Number of cutting blades: 2x14 ✔ Granulation: 10–50 mm ✔ Capacity: up to 5 m³/h* ✔ Extraction connection: 160 mm ✔ Feed opening: 1446 x 1342 mm ✔ Dimensions (L/W/H): 1.92 / 1.55 / 1.79 m ✔ Weight: 1,750 kg 2 years warranty or 2,000 operating hours

Kondisi: baru, 4-axis CNC machining center for processing profiles made of aluminum, PVC, and steel Comparable to Emmegi, Elumatec, Fom, Pertici, etc. Machine frame of stable welded construction, stress-relieved annealed, with hardened linear guides Protective enclosure along the entire machining length Pneumatically operated protective door Milling Spindle: 3.8/4.6 kW S1/S6 3.0/3.7 Nm S1/S6 max. 18,000 rpm, air-cooled with ISO 30 tool holder with minimum quantity lubrication for the tools, including fill level monitoring Tool Magazine: 5 positions, left side of machine bed, for drill, milling, tapping tools, angle head, disc cutter up to Ø 150 mm Workpiece Clamping: 4 pneumatic profile clamps, clamping range up to 250 mm automatic positioning via device on the Z-axis Workpiece Positioning: 1 pneumatic reference stop left and right on the A-axis Travels: X-axis 3500 mm Y-axis 370 mm Z-axis 348 mm A-axis ±90° Travel Speeds: X-axis 70 m/min Y-axis 30 m/min Z-axis 30 m/min A-axis 60°/sec Max. Working Areas: X-axis 3270 mm Y-axis 250 mm at 0°, 116 mm at ±90° of A-axis Z-axis 170 mm at 0°, 200 mm at ±90° of A-axis Operating Software: CAD/CAM in 3D technology (option, included!) Programming system according to ISO standard Functionality: Linear and circular interpolation on two axes (X-Y) Three-side machining via swiveling of axis A 90°-0°-90° Bedpfx Aewrcwpjbhswh End face processing via disc cutter Operating Modes: One profile bar over the entire machining length Two profile bars in divided machining length Lubrication System: Automatically controlled central lubrication for all axes, ball screws and guides, with fill level monitoring Operation: 18.5" touchscreen Mouse + keyboard Connection Data: Electrical: 400V/50Hz (3-Ph+N+PE), 16 A, delivered without power cable Pneumatic: Pressure 6 - 8 bar Dimensions and Weight: Length: 5800 mm Width: 1640 mm Height: 2000 mm Weight: 2000 kg Incl.: Graphical programming software CM3D/CAD3D Barcode reader Additional network connection incl. remote maintenance/diagnostics for 1 year