Mesin penggiling baja

GREIF DHL-1-1-KT

Kondisi: perlu perbaikan (bekas), Machine number: 1464 Type / Model: FUW 250/IV Travel (X-Y-Z): 400 - 220 - 400 mm Table size: 630 x 350 mm Clamping surface: 700 x 300 mm Speed range: 45 to 2,240 rpm Spindle taper: SK 40 Feed range longitudinal: 6.3 to 1,250 mm/min Guedpfxed Hl Sto Ag Rjk Feed range cross: 6.3 to 1,250 mm/min Power connection: 7.4 kW Accessories/Equipment: Vertical head Condition: 2 controllers defective Note: Machine repair EUR 2,000 Weight: 1.45 t Dimensions: 1,500 x 1,600 x 1,800 mm

Tahun pembuatan: 1994, Kondisi: baik (bekas), Ziersch & Baltrusch Surface Grinding Machine - Equipped with Formmaster 6 / 30 - Includes belt filtration system - Includes coolant system - Width: 250 cm - Depth: 200 cm - Height: 220 cm Good condition, fully functional. The machine can be inspected and tested under power on-site. Shipping available internationally. Inspection: As a general note, to avoid any misunderstandings, the item can be viewed and tested under power prior to purchase. Please ask any questions before buying to avoid ambiguities. For general inquiries or to schedule an inspection appointment, I am always available at the phone number listed below or above. Subject to prior sale and errors in description. Guedpfsk Ixl Ajx Ag Rek VAT is shown separately on my invoices. Shipping via freight forwarder.

Tahun pembuatan: 1969, Kondisi: siap digunakan (bekas), Max. grinding depth: 80 mm, spindle-to-table distance: 145 mm, spindle bore: 28 mm, connected load: 7 kW, length: 2,100 mm, width: 1,400 mm, height: 950 mm, weight: 1.6 t, with documentation. An on-site inspection is possible. Godpfjqzkdmsx Ag Reuk

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, jarak pergerakan sumbu X: 400 mm, jarak lintasan sumbu Y: 350 mm, jarak gerak sumbu Z: 300 mm, kecepatan spindel (maks.): 4.500 rpm, kecepatan spindel (min.): 1 rpm, gores kuas bulu: 60 mm, tinggi total: 2.100 mm, lebar total: 2.100 mm, panjang total: 2.300 mm, lebar meja: 450 mm, panjang meja: 750 mm, kecepatan rotasi (maks.): 4.500 rpm, kecepatan rotasi (min.): 1 rpm, berat keseluruhan: 1.900 kg, berat benda kerja (maks.): 500 kg, Travels X/Y/Z 400/350/300 mm, spindle speeds 1 - 4500 rpm, motor 4.5 kW, spindle taper SK 40, Heidenhain TNC 320 control system, table size 750x450 mm, hydraulic tool clamping, coolant system, splash guard, tool holders, electronic handwheel, operating manual Gjdpfx Agjwb Erzs Rjuk

Kondisi: sangat baik (bekas), Tahun pembuatan: 1977, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 100 mm Grinding wheel diameter: 360 mm Total power requirement: kW Gujdpfount Eyjx Ag Rek Machine weight approx. 3.8 t Space requirement approx. 3.5 x 1.3 x 1.5 m Machine in very good condition! External and internal spindle. Extensive accessories included.

Tahun pembuatan: 1978, Kondisi: bekas, nomor mesin/kendaraan: 068242, Cup wheel diameter: 175 x 60 x 51 mm or 125 x 40 x 51 mm 2 grinding wheel speeds: 1450/2900 rpm Guodpfx Ajbx Eliog Rok Table size: AT-F 205 x 345 mm Space requirement: 1070 x 650 x 1180 mm Drive motor: 500 V (with 380 V approx. 1/3 power loss), rated at 0.6 kW

Tahun pembuatan: 1986, Kondisi: sangat baik (bekas), Dimensions (LxWxH): approx. 450x300x1700mm Maximum drilling depth: 60mm Maximum workpiece height: 350mm Table dimensions: 250x250mm Speed range: 430 - 9000 rpm (12 speed settings) 2 motor speed levels Gjdpoh Dimyefx Ag Rouk Speed adjustment via V-belt Includes drill chuck Includes 16 A power connector Includes base frame

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: A2536805, Pressure: 40 t Stroke: 250 mm Retracting Force: 6.3 t Motor: 5.5 kW Max. Working Height: 450 mm Max. Approach Speed: 90 mm/sec Pressing Speed: 10 mm/sec Travel Distance (w): 250 mm Ram Plate: 500 x 200 mm Table Plate: 600 x 650 mm with T-slots Table Cut-out: 200 x 170 mm Table Height: 850 mm Oil Tank: 200 l The described machine can be custom-built for you. Production time is approximately 5 months from receipt of payment. Approach: The press moves to the zero point at up to 90 mm/second. The positioning accuracy is 0.5 mm or better. Return: The press moves back to the end point at up to 90 mm/second. The accuracy here is 0.5 mm or better. The dwell time is adjustable from 0 to 10 seconds (in increments of 0.1 seconds). The press force can be adjusted between 10 and 40 tons (in bar). Further control details: The control system can be locked with a key switch. The key switch for the control system has the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stops at any desired position when the switches are released.) - Manual operation for bending tasks at up to 9.5 mm/sec using two-hand control and automatic return to top dead center when both two-hand buttons are released. Guedpfx Aofxyhfeg Rsk - Automatic operation with secure tooling at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine may only be used with fully enclosed, secure tooling—this information is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via the two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A key selector switch is used to toggle between automatic and manual operation. Position adjustment for top and bottom dead center as well as switching position for speed reduction is managed via sensors that are adjustable on a chrome-plated rod. A clamping thread allows for fine sensor adjustment—accuracy is +/- 0.5 mm. The press can be equipped with a bending blade and, using the two-hand control, can perform sheet metal bending as well as punching, notching, and bending in automatic mode with secure tooling.

Kondisi: bekas, Tahun pembuatan: 2007, Grinding area 600 x 450 mm Magnetic chuck size 600 x 400 mm Grinding wheel dimensions 300 x 50 x 76.2 mm Total power requirement 11 kW Machine weight approx. 2.1 t In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, depicted tools, and clamping devices are only included in the scope of delivery if stated in the additional information. Technical data and information subject to change and prior sale excepted. Gusdpsvy Ip Iofx Ag Rsk

Kondisi: baik (bekas), Tahun pembuatan: 1988, panjang penggilingan: 1.000 mm, lebar penggilingan: 550 mm, tinggi penggerindaan: 400 mm, diameter roda gerinda: 400 mm, lebar roda gerinda: 100 mm, Manufacturer: ELB-SCHLIFF Model: SWBE 010 ND Year of manufacture: 12/1988 Delivery time: immediate Electro-permanent magnetic chuck SAV 1000 x 400 mm Fine pole pitch 45-5 mm Electronic straight dresser with compensation Vertical digital readout Mounting with grinding wheel max. 400 x 100 x 127 mm Spindle motor 7.5 kW, 1435 rpm Gedpfx Agsu Rqyne Rouk Taper wedges Coolant system with universal paper band filter Complete documentation