Prisma kedatangan

Guss 200/90/H170 mm 90°

Kondisi: bekas, Marking prism, inspection prism, prism, angle prism, clamping angle, clamping prism, clamping cube, prism block - Marking prism: for marking table, clamping plate, straightening bench ... - Dimensions: 170/90/H200 mm - Weight: 10.2 kg Fsdpfx Ahsuzn D Sjusga

Kondisi: baru, Cross table with rotary plate Table length: 330 mm Table width: 220 mm Fsdeupw Twopfx Ahuoga X travel: 210 mm Y travel: 125 mm Table height: 150 mm T-slots: 12 mm Weight: 33 kg Dimensions (L x W x H): 0.41 x 0.35 x 0.22 m

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Output: 0.85 / 1.5 kW Fedehpmbbspfx Ahujga Speed range: 300 – 4,000 rpm Speed settings: stepless Spindle taper: MK-3 Drilling stroke: approx. 105 mm Spindle outreach: 200 mm Weight: 152 kg

Kondisi: baru, Load capacity per rack: 12,000 kg Load capacity per level: 2,000 kg Number of storage levels: 6 pcs. Recommended material length: 3,000 mm Frame width: 1,500 mm Rack height: 2,440 mm Dimensions (L x W x H): 2.3 x 0.9 (1.35) x 2.45 m The optimal solution for storing long materials with two columns. - Each compartment can be swung outwards, allowing for loading and unloading with an overhead crane at any time. - Single-sided design. Galvanised tray made from 2 mm steel sheet, length 3,000 mm: €301 Fedpsfgyg Refx Ahuega Galvanised tray made from 2 mm steel sheet, length 3,000 mm, with cut-out: €333 Separator for tray, steel: €54.00 Separator for arm, steel: €54.00 Separator for tray, stainless steel: €69.00 Separator for arm, stainless steel: €69.00

Kondisi: bekas, Tahun pembuatan: 1975, Workpiece diameter: 8–125 mm Grinding depth: 130 mm Clamping length: 50–1100 mm Max. workpiece diameter: 0 mm Min. workpiece diameter: 0 mm Workpiece length: mm Fgsdpfx Ahot Hwuveuoa Total power requirement: 1 kW Machine weight approx.: 500 kg Dimensions approx.: m T E C H N I C A (Switzerland) Vertical Center Bore Grinding Machine Type: ZSM 1000 Year of manufacture: approx. 1975 Serial No.: J 1400 ---- Centre distance: 50–1,100 mm Workpiece diameter: 8–125 mm Swing diameter (tailstock centre / guideway): 290 mm Swing diameter (vice / grinding head column): 130 mm Max. workpiece weight: approx. 120 kg Max. centre bore taper diameter: 2–50 mm Max. centre bore taper angle: 60° Vice clamping range approx.: 4–150 mm Vertical stroke of grinding head, coarse adjustment: 130 mm Fine infeed of grinding pin via handwheel: 0.01–1 mm Grinding pin diameter: 27–60 mm Grinding spindle speeds, depending on pulley: 13,000–45,000 rpm Workpiece drive: 0 rpm Total drive approx.: 1 kW, 380 V – 50 Hz Weight approx.: 500 kg Accessories / Special Features: • On this machine, the grinding pin rotates about a parallel, offset axis, generating a planetary movement along the conical surface to be ground at the workpiece centre. • Manually height-adjustable workpiece centering support with carbide inserts and counter point, with manual clamping and centering of the workpiece. • Manually operated dresser unit mounted laterally to the grinding spindle, stroke approx. 40 mm, with an additional oscillating motion for producing a geometrically accurate cone shape. • Foldable pre-centering device for the workpiece • Manually height-adjustable tailstock and bore in the machine base for longer workpieces, However, the machine is supplied without workpiece drive in the tailstock. Machine is supplied without pre-centering device. Condition: Slightly in need of overhaul – ready for demonstration – Current new price at least approx. €80,000. Delivery: Ex stock – as inspected Payment: Net – payable upon receipt of invoice, prior to delivery.

Kondisi: bekas, Drilling device on base plate with three-jaw chuck and dual height-adjustable and horizontally adjustable mount for a drill machine. Comprising: Three-jaw chuck AROWA, 250 mm diameter, horizontally rotatable by 380° with scale, indexing, and clamping. Base frame for accommodating a drilling machine, guided on two columns and spindle height-adjustable design, featuring a horizontally adjustable mount with scale (travel: 120 mm) on the same plane. Above that, a round column provides primary height adjustment on the column with clamping. Mounted on this is a circular guide with rack-and-pinion and lever feed for the drilling procedure (stroke: 100 mm). Fedpfx Aec U U Udshuega Overall space required: 600 x 400 x 850 mm (H) Weight:

Kondisi: bekas, Steady rest, tailstock, Lynette Fsdpfxsiaqm Uj Ahuoga - Steady rest: max. passage Ø 400 mm - Center height: 345 mm - Technical drawing: see photos - Overall dimensions: 930/165/H890 mm - Weight: 98 kg

Tahun pembuatan: 1998, Kondisi: sangat baik (bekas), 1/2 steady rest tailstock suitable for diameter 500 mm SPH 450 mm quill diameter 100 mm Fsdpfx Ahsfgwi Tjusga

Kondisi: baru, en-GB-001 Fgedpfx Ahsvxgtisuoa

Kondisi: baru, Loading capacity rack: 15,000 kg Loading capacity per level: 3,000 kg Number of storage levels: 5 pcs Recommended material length: 6,000 mm Frame spacing: 2 x 2,000 mm Rack height: 2,440 mm Dimensions (L x W x H): m Fjdefgyg Ejpfx Ahusga The most suitable solution for storing long materials with 3 uprights. - Each compartment can be swung outwards, allowing loading and unloading with an overhead crane at any time. - Single-sided design. Galvanized tray made of 2 mm steel sheet, length 4,000 mm: EUR 344 Galvanized tray made of 2 mm steel sheet, length 4,000 mm, with cutout: EUR 387 Distributor for tray, steel: EUR 54.00 Distributor for arm, steel: EUR 54.00 Distributor for tray, stainless steel: EUR 69.00 Distributor for arm, stainless steel: EUR 69.00