Pusat pemesinan horizontal

Hüller Hille nb-h95 , nb-h135

Kondisi: diremaj di bengkel (bekas), nomor mesin/kendaraan: 550-235-ELD, GENERAL FEATURES Maximum rolling diameter 41 mm Maximum/minimum module range 1.5 / 0.39 Maximum rolling width 92 mm Maximum tool slide stroke 760 mm Maximum rack length 610 mm Maximum/minimum diametral pitch 20/40 - 32/64 Manufacturing No. 550-235-ELD ELECTRICAL SPECIFICATIONS Main motor power 15 HP Ncodjd Nw Ttjpfx Aa Ujt

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, Mandrel Bending Machine S4501 ----- For the production of tube geometries with bending radii from 1.5xD Ncjdjtr U Hlopfx Aa Uet → Maximum bending capacity tube 42.4 x 3.25 mm (steel max. Re 240 N/mm²) → Maximum bending capacity tube 30 x 30 x 3 mm → Maximum bending capacity tube 42.4 x 2 mm (stainless steel 0.2 = 260 N/mm²) → Total connected load 3 kW → Tube loading length approx. 1.5 m Robust and durable steel construction. Maintenance-free servo drive for bending, feed, and rotation axes. The touchscreen control enables straightforward and intuitive programming and operation of the machine. After loading the tube, it is secured by the chuck in the carriage. This enables precise positioning of the tube, ensuring contour-accurate geometries. Standard features include geometry control before the bending process: if the bending process is initiated at the wrong position, the machine will not grant approval, thus eliminating operator error. Optional features add convenience, boost output, and therefore increase system efficiency. Data exchange with the optional pipe calculation software TBS-3D (PC version) is via USB stick or network. Existing pipe geometries can be imported using the software. Standard Equipment: → Servo drive for bending axis 1.5 kW → Adjustable rotational speed → Left-hand bending direction → Bending angle resolution 0.1° → Max. bending radius 120 mm → Bending shaft diameter 50 mm → Servo-driven feed → Servo-driven rotation → Three-jaw chuck for securing the tube in the carriage → Pneumatic tool retraction Hydraulics: → Hydraulic tube clamping with adjustable clamping pressure → Programmable early mandrel retraction PLC Control: → 10" color touchscreen → ETH 10/100, X2X Link, 2x USB → Foot pedal operation → Data transfer via LAN network or USB → Material database Unique graphic programming: Simple geometries can be calculated directly on the machine. The controller directly calculates the feed values and bending angles after entering length and angle values. Power supply: 400V 16A Dimensions: L: 2.3m x W: 1m x H: 1.4m Weight: approx. 1200 kg

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2005, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 6.800 mm, jarak lintasan sumbu Y: 3.000 mm, jarak gerak sumbu Z: 1.200 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 30 m/menit, pergerakan cepat sumbu Z: 30 m/menit, 5-axis machining centre in gantry design with powerful motor spindle. EDEL CYPORT – CP 6830 Travel ranges X/Y/Z: 6,800 / 3,000 / 1,200 mm Gantry clearance Y/Z: 3,276 / 1,405 mm Rapid traverse X/Y/Z: 30/30/30 m/min 2-axis NC machining head M-Series (CYTEC): Swivel range A-axis: +/-110° Swivel range C-axis: +/- 360° Powerful CYTEC milling spindle: Tool holder: HSK-A100 Speed: 8,000/12,000 rpm Power: 50/64 kW (100%/40% duty cycle) Torque: 240/300 Nm (100%/40% duty cycle) Control system: HEIDENHAIN TNC 530 (alternatively Heidenhain TNC 640 / 7) 5-axis path control Electronic handwheel HR 550 (wireless) Charging station HRA 551 DXF converter CAD viewer KinematicsOPT Increased energy efficiency (certificate) Remote maintenance Tool magazine: Number of positions: 39 HSK-A100 (up to 300 positions possible) Max. tool diameter: 125/175 mm Max. tool length: 300 mm Max. tool weight: 15 kg Coolant system Manufacturer: KNOLL Tank capacity: 1,600 L External coolant supply: 20 bar Internal coolant supply: 50 bar Paper band filter, rinsing pistol Chip conveyor Coolant-air blow-off switching Workpiece measuring system: BLUM TC 60 probe – wireless technology Ncsdsigrikjpfx Aa Ust (alternatively available from Heidenhain) Machine enclosure Safety features Documentation CE certification The machine offered is an advance machine, currently in its final assembly stages. Option modification is possible on short notice. The machine can be inspected at our assembly facility in Jülich by prior arrangement. CYPORT – Flexible, Powerful, Dynamic. Minimal footprint, maximum working space. Made in Germany

Kondisi: baik (bekas), Hydraulic power unit, hydraulic pump, hydraulic station, universal power pack, hydraulic module Ncedpfxjgz Irvs Aa Ust -Manufacturer: Rexroth/Hydraudyne, hydraulic station with oil cooler / accumulator / filter etc. -Type: 03 HDJ -Motor power: 22 kW / 1,460 rpm -Tank capacity: approx. 240 litres -Pressure gauge: up to 250 bar -Individual components: accumulator / hydraulic tank / filter / valves, see photos -Quantity: 2 units available -Price: per unit -Dimensions: 1060/820/H1530 mm -Weight: 738 kg

Kondisi: bekas, Tahun pembuatan: 2017, Diameter pipa (maks.): 80 mm, panjang mandrel: 4.500 mm, Mandrel bending machine S8004 ----- For the production of dimensionally accurate tube geometries with bending radii of up to 1.5xD → Maximum bending capacity tube 76 x 4 mm (400 N/mm²) → Maximum bending capacity tube 60 x 60 x 3 mm (400 N/mm²) → Maximum bending capacity tube 76 x 2.9 mm (stainless steel) → Total connected load 7 kW → Tube feed length 4.5 m Nsdpfettah Rex Aa Ujct Robust and durable steel construction in a rigid connection – no torsion-prone design caused by, for example, a split construction of bending head and mandrel carrier. Maintenance-free electromechanical drive of the bending axis. The control’s touch display allows for easy and intuitive programming and operation of the system. Once the tube is fed in, it is clamped in place in the carriage by the chuck, ensuring exact tube positioning and enabling the production of dimensionally accurate geometries. Also standard is a tube geometry check before the bending process: If the bending process is started at the wrong position, the machine does not grant approval, thus preventing operator errors. Optional additional features provide greater comfort and increase output, thereby improving system efficiency. Data exchange from the optional tube calculation software TBS-3D (PC version) is performed via USB stick or by FTP access of the computer to the machine control. USB or LAN (RJ45) ports are standard. Existing tube geometries can be easily and quickly converted, e.g., via the STEP format. Standard features: → Electromechanical drive of the bending axis 4 kW → Speed 2.9 rpm (=17°/sec) → Left-hand bending direction → Bending angle resolution 0.1° → Max. bending radius 200 mm → Bending shaft diameter 50 mm → Electronic length measurement ±0.1mm → Electronic rotation measurement ±0.1° → Manual stop system (longitudinal overrun stops) → Manual indexing system (15° rotational increments) → Three-jaw chuck for securing the tube in the carriage → External control panel PLC control system: → 10.1" touchscreen → ETH 10/100, X2X Link, USB → Foot pedal operation → Data transmission via network (W)LAN or USB → Material database Unique graphical programming: Simple geometries can be calculated directly on the machine. After entering length and angle, the control automatically calculates the feed values and bending angles. Hydraulics: → Hydraulic power 3 kW → Hydraulic tube clamping with adjustable clamping pressure → Programmable premature mandrel retraction Options (available as additional equipment): → Variable bending speed via frequency inverter or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + rotation) → Mobile version (with rollers) → Radius extension Photos show new machine.

Kondisi: seperti baru (mesin pameran), CNC ultra-high pressure waterjet cutting system SAME / Bogacki - 2515 BA 2D - Demonstration machine - Travel distances: 2,550 x 1,550 x 200 mm Control: BOSCH MTX Aquacut edition - CAD / CAM system - Operator PC with portable electronic handwheel Includes high-pressure pump HB 50 Includes stainless steel work table (2,700 x 1,700 mm) Nodpfxogq Nqbo Aa Ujct Includes CE-compliant safety equipment (light barriers) Includes splash guard (see images) Includes abrasive container (250 kg) Includes Allfi abrasive cutting head Includes red light laser Includes drilling unit, 4 mm diameter, ER 16 chuck - Very few operating hours

Kondisi: baik (bekas), Tahun pembuatan: 1979, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 332046, jarak pergerakan sumbu X: 8.000 mm, jarak lintasan sumbu Y: 3.000 mm, jarak gerak sumbu Z: 2.200 mm, kecepatan spindel (maks.): 850 rpm, kecepatan spindel (min.): 6 rpm, kecepatan pemakanan sumbu X: 8 m/menit, laju pemakanan gandar Y: 6 m/menit, laju pemakanan sumbu Z: 1 m/menit, lebar total: 10.000 mm, panjang total: 14.000 mm, tinggi total: 4.500 mm, diameter spindel: 160 mm, beban meja: 40.000 kg, panjang meja: 3.000 mm, lebar meja: 3.000 mm, berat benda kerja (maks.): 40.000 kg, berat keseluruhan: 71.000 kg, panjang spindel bor: 1.200 mm, tahun perombakan terakhir: 2002, daya: 60 kW (81,58 hp), Mesin bor pelat dengan meja putar CNC TDV5 untuk pekerjaan pemesinan yang menuntut. Ncjdpouplptefx Aa Uet

Kondisi: baru, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2025, jenis kontrol: Kontrol CNC, tingkat otomatisasi: otomatis, jenis aktuasi: hidrolik, jumlah rol: 3, diameter poros: 35 mm, kecepatan rotasi (maks.): 30 rpm, berat keseluruhan: 490 kg, daya: 1,5 kW (2,04 hp), tegangan masuk: 400 V, frekuensi input: 50 Hz, masa garansi: 12 bulan, Perlengkapan: Penandaan CE, dokumentasi / manual, BPR BA 35 CNC Three-Roll Ring Bending Machine, Hydraulic Technical Data: Shaft diameter: 35 mm Ncjdpswwt Hfsfx Aa Uet Roll diameter: mm (on request) Shafts made of high-strength steel, hardened and ground Drive motor: 1.1 kW, 50 Hz Hydraulic pump motor: 3 kW Shaft speed (variable): 0–30 rpm Operating positions: horizontal and vertical Separate control panel External dimensions: 740 x 1020 x 1110 mm Control panel dimensions: 600 x 710 x 1120 mm Weight: 490 kg Hydraulic adjustment of the side roll Three driven rolls with smooth surface Electronic control: BPR Probending CNC Hydraulic cylinder pressing force: 5,500 kg Working pressure: 190 bar Included accessories: Rollers for 1" pipe Straightening rolls Service keys Operating manual

Kondisi: baik (bekas), Léghűtő, párologtató, hűtőház, hűtőkonténer, hűtőcella -Felhasználási terület: hűtőberendezéshez csatlakoztatható -Ventilátor átmérője: 500 mm -Megengedett üzemi nyomás: 8 bar -Megengedett üzemi hőmérséklet: 100 °C -Nyomás mínusz hőmérsékleten: 21 bar / -60 °C -Tartalom: 13,2 liter -Lamellatávolság: 7 mm Nodpfxob Nx Hlo Aa Uect -Mennyiség: 2 db hűtő elérhető -Ár: darabonként -Méretek: 1350/740/H700 mm -Súly: 174 kg/db

Kondisi: baru, berat keseluruhan: 340 kg, laju aliran volumetrik: 1,44 m³/jam, Atlas Copco G11FF Screw Compressor Specification: • Condition – New • Manufacturer – Atlas Copco • Capacity – 1,440 l/min • Main motor power – 11.0 kW • Tank – 500 l • Maximum working pressure – 10.00 bar • Integrated refrigeration dryer • Electronic compressor parameter setting • Sound-insulated cabinet (only 67 dB) • CE compliant • Weight – 340 kg Additional information: • Manufacturer’s warranty available upon commissioning by an authorised Atlas Copco service Njdpfeh Unupox Aa Usct • User manual in Polish and complete documentation for UDT • Available immediately or within 7 business days