Vertikal mesin pusat

HAAS VF-2SSYT

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2020, jarak pergerakan sumbu X: 762 mm, jarak lintasan sumbu Y: 508 mm, jarak gerak sumbu Z: 508 mm, produsen pengendali: HAAS, kecepatan spindel (maks.): 12.000 rpm, daya motor spindle: 22.400 W, This 5-axis HAAS VF 2 SS YT vertical machining center was manufactured in 2020. Ideally suited for precision machining, it offers a robust construction and advanced control technology. If you are looking for high-quality milling capabilities, you should consider the HAAS VF 2 SS YT machine we have for sale. Please contact us for further information. Additional Equipment • Type: Side-mount Tool Changer (SMTC) / Capacity: 30+1 / Maximum tool diameter (full): 64 mm / Max. tool diameter (adjacent empty): 127 mm / Maximum tool length: 279 mm / Maximum tool weight: 5.0 kg • Tool-to-tool (average): 1.80 s / Chip-to-chip (average): 2.40 s • Included: HRT210 Machine Advantages Technical Machine Benefits • Torque: 122 Nm at 2000 rpm • Drive system: Inline direct drive • Taper: BT40 / CT40 / HSK-A63 • Lubrication: Air-oil injection / Cooling: Liquid-cooled • Maximum cutting feed: 21.2 m/min / Rapid traverse rates on X, Y, Z axes: 35.6 m/min • Coolant tank capacity: 208 l / Coolant pressure through spindle: 21 bar / Air blast through tool: Yes / Chip auger: Yes / Chip tray filter set: Yes / Air blast through window: Yes / Coolant pump: Multistage Hfedpfjyaix Uex Aanjg • Air consumption: 113 l/min at 6.9 bar / Minimum air pressure: 5.5 bar / Air hose connection: 3/8 inch • Standard interface: Ethernet and WiFi / Control memory: 1 GB / Remote monitoring: HaasConnect / High-speed machining: Included / Advanced tool management: Included / Media display (M130): Included / Power-fail detection: Included / Safe run function: Included / Rigid tapping: Included

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, jam operasional: 5.327 h, jarak pergerakan sumbu X: 762 mm, kecepatan spindel (maks.): 12.000 rpm, jumlah sumbu: 3, HAAS VF-2SS tiga sumbu ini diproduksi pada tahun 2014. Mesin ini dilengkapi dengan fitur-fitur canggih seperti pengukuran alat dan probe ukur untuk presisi yang lebih tinggi. Dengan waktu pemesinan (machining time) 5327 jam, pusat pemesinan vertikal ini dirancang untuk operasi yang efisien. Jika Anda mencari solusi pemesinan berkualitas tinggi, pertimbangkan mesin HAAS VF-2SS yang kami tawarkan untuk dijual. Silakan hubungi kami untuk informasi lebih lanjut. • Pendingin tekanan tinggi internal (IKZ) • Probe pengukur • Pengukuran alat • Konfigurasi sumbu: 3 sumbu (X/Y/Z) • Frekuensi: 50 / 60 Hz Hfsdpeyux Saofx Aanjg • Daya pemutusan hubung singkat: 10.000 A • Arus hubung singkat: 5.000 A RMS simetris • Klasifikasi busur listrik: • Model 208-240 VAC: HRC-1 • Model 360-480 VAC: HRC-2 • Waktu pemesinan: 5327 jam

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2022, produsen pengendali: HAAS, kecepatan spindel (maks.): 12.000 rpm, HAAS VF-2SSYT 3-sumbu dengan pallet pool 3+1 ini diproduksi tahun 2022. Mesin ini memiliki spindle inline 30 HP, 22,4 kW dengan kecepatan 12.000 rpm dan penukar alat 50+1. Dilengkapi layar 15" serta pallet pool 3+1 dengan ukuran palet 900x450 mm. Jika Anda mencari mesin milling berkualitas tinggi, pertimbangkan HAAS VF-2SSYT yang kami tawarkan untuk dijual. Hubungi kami untuk informasi lebih lanjut. Keunggulan mesin Keunggulan teknis: • Penukar alat: 50+1 posisi • Pendingin ekstra: 360 liter • Pallet pool: 3+1 posisi dengan palet 900x450 mm • Pendingin melalui spindle 21 bar • Layar 15" Hjdpjx Hbluefx Aansfg Informasi tambahan Mesin masih dalam kondisi menyala.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2024, jarak pergerakan sumbu X: 762 mm, jarak lintasan sumbu Y: 508 mm, jarak gerak sumbu Z: 508 mm, beban meja: 680 kg, kecepatan spindel (maks.): 12.000 rpm, daya motor spindle: 22.400 W, berat alat: 5.000 g, jumlah sumbu: 3, This 3rd generation HAAS VF-2SSYT CNC vertical machining center from 2024 features a maximum spindle speed of 12,000 rpm and a robust tool changer with a 30+1 tool capacity. The machine has seen minimal use and is in excellent condition. It offers travel distances of 762 mm on the X-axis and 508 mm on both the Y and Z axes. Take advantage of this opportunity to acquire the HAAS VF-2SSYT vertical machining center. Contact us for further details. Hfedpfxoykrz Hs Aaneg • Spindle nose to table (max/min): 610 / 102 mm • Table: • Size: 914 x 457 mm • T-slots: 3 • T-slot width: 15.9–16 mm • T-slot center distance: 125 mm • Spindle: • Max. torque: 122 Nm @ 2000 rpm • Drive: Inline direct-drive • Taper: CT40 / BT40 / HSK-A63 (depending on configuration) • Bearing lubrication: Air/oil injection • Tool changer: • Type: SMTC • Capacity: 30+1 tools • Max. tool diameter: 64 mm (127 mm if adjacent slot is empty) • Max. tool length: 279 mm • Tool-to-tool time: 1.8 s • Chip-to-chip time: 2.4 s • Feed rates: • Max. cutting feed rate: 21.2 m/min • Rapid traverse rates (X/Y/Z): 35.6 / 35.6 / 35.6 m/min • Axis drive motors (thrust): • X: 8,874 N • Y: 8,874 N • Z: 13,723 N • Electrical: • Input voltage (low): 220 VAC, 70 A full load • Input voltage (high): 440 VAC, 35 A full load • Coolant: Capacity 208 L • Air requirement: • Air consumption: 113 L/min @ 6.9 bar • Minimum pressure: 5.5 bar • 4th axis ready Additional equipment: • Mist/fume extraction system • Automatic water and oil dosing system for coolant • Integrated coolant oil separator • Renishaw probing system • 2 machine vices • Complete set of high-quality toolholders, milling cutters, and drills

Kondisi: hampir baru (bekas), Tahun pembuatan: 2010, de Hfjdpfx Aasv Igg Ijnjg

Kondisi: baik (bekas), Tahun pembuatan: 2010, jam operasional: 100.000 h, tekanan (min.): 10 batang, tekanan (maks.): 10 batang, jenis pendinginan: air, Perlengkapan: Pelat tipe tersedia, dokumentasi / manual, pengering pendingin, Atlas Copco Screw Compressor GA 18 - 10 FF Fully automatic, internally completely piped and wired compact unit, single-stage oil-injected compression, air-cooled, soundproofed, with integrated refrigeration dryer (WorkPlace Air System™). Technical Data Reference Conditions: Inlet pressure 1 bar Inlet temperature 20 °C Relative humidity 0% Usable volume flow at the outlet of the compact unit at operating overpressure 9.75 bar: 49.4 l/s (2.96 m³/min) per ISO 1217-3, C Motor rated power 18 kW Motor rated speed 4,867 rpm Shaft power requirement at maximum operating pressure 24 kW Shaft power requirement at idle 5.6 kW Compressed air temperature after dryer 23 °C Cooling air flow 0.23 m³/s Oil filling quantity 12.2 l Hedpfx Aaeu Rptyonefg Residual oil content under reference conditions

Kondisi: bekas, Tahun pembuatan: 1977, Grinding diameter: 350 mm Grinding length: 1000 mm Center height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Infeed (per stroke): 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling: ±8° Longitudinal movement of the table: 1300 mm Hfedpeynmpgjfx Aaneg Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight (cantilevered): 130 kg incl. clamping Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space requirement approx.: 4.2 x 2.0 m Newly delivered to university. Taken over in 2018. Then fully serviced by BEMA and delivered to a single-person operator. The machine will now be serviced again and the table geometry reconditioned. 2-axis digital readout (Fagor) retrofitted. – Tailstock with fine adjustment – Internal grinding attachment – Coolant system Accessories available on request.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2019, jam operasional: 11.111 h, kecepatan spindel (maks.): 4.000 rpm, produsen pengendali: HAAS, model controller: n/a, This HAAS ST-20 was manufactured in 2019. A robust horizontal turning center featuring a 210 mm hydraulically actuated chuck, a VDI turret with 12 tool stations, and a spindle speed of 4,000 rpm. It supports a maximum workpiece capacity of 330 x 572 mm and bar diameters up to 64 mm, making it ideal for precision turning operations. Please contact us for more information about this machine. Additional Equipment • Additional options: Live tooling with 4,000 rpm and C-axis, 12-position BMT65 turret, automatic tool presetting arm • Features: Hinged belt chip conveyor, parts catcher for turned parts • Coolant system: 208 l coolant tank, variable coolant flow • Other features: Visual part programming system (1 GB), hydraulically actuated 210 mm A2-6 chuck, power failure early detection module, synchronized threading, safe operation, touchscreen control, Ethernet, HaasConnect, HaasDrop, M130, WLAN • Additional features: Macros, SOM Machine Benefits Technical Advantages of the Machine • Maximum workpiece capacity: 330 x 572 mm / Bar diameter range: 64 mm • Turret type: VDI turret with 12 tool stations • Type: Programmable hydraulic tailstock Hfsdpfx Aajx D Ezfjnog • Robot interface preparation / live tooling. Chip conveyor and tool measurement included. OPTIONAL: Tool holders available for an additional charge. See attached images.

Kondisi: baik (bekas), Tahun pembuatan: 1998, Teile, die von Hand gezeigt werden, sind nicht im Lieferumfang enthalten. Technische Daten sind auf dem Bild dargestellt. Hjdpfswb Aqnsx Aanjfg

Kondisi: siap digunakan (bekas), Presa de debavurat Erfurt PKZe 500/1000 Forță: 500 t Hodovbcxtjpfx Aansfg Dimensiuni masă: 1020x1420 mm Cursă: 400 mm Număr de curse/minut: 12 Motor principal: 41 kW Video disponibil