HAAS VF-4SSHE

HAAS VF-4SSHE

Kondisi: baik (bekas), Tahun pembuatan: 2009, Diameter roda - maks. 1200 mm Lebar roda 260 mm Modul - maks. 16 Modul - min. 0,5 Langkah (stroke) 270 mm Pjdowzmpzspfx Aqvjrb Jarak spindle/meja 920 mm Penahan roda pemotong - SK Kontrol Bosch MTX Diameter meja 900 mm Diameter benda kerja maks. untuk roda gigi dalam 1200 mm Jumlah langkah - tanpa tahapan 50-1000 langkah/menit Diameter spindle 125 mm Lubang meja 320 mm Jarak sumbu Min/Maks 0-820 Daya penggerak kepala pemukul 30 KW Kebutuhan daya total 72 KVA Berat mesin sekitar 24 t Kebutuhan ruang sekitar 6,5x2,9x4 m M8160132

Kondisi: sangat baik (bekas), Tahun pembuatan: 2004, Winch incl. Maximum lifting capacity: 2 tons at 2.7 meters Maximum lifting capacity: 1 ton at 5.3 meters Operating hours: 270 h Electric: yes Prodpfxjq N E U Aj Aqvob

Kondisi: bekas, Tahun pembuatan: 2023, jam operasional: 100 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 6LUD00308, jarak pergerakan sumbu X: 620 mm, jarak lintasan sumbu Y: 520 mm, jarak gerak sumbu Z: 460 mm, gerak cepat sumbu X: 36 m/menit, pergeseran cepat sumbu Y: 36 m/menit, pergerakan cepat sumbu Z: 36 m/menit, daya nominal (semu): 45 kVA, torsi: 180 Nm, produsen pengendali: Siemens, model controller: Sinumerik 840D, tinggi benda kerja (maks.): 430 mm, diameter benda kerja (maks.): 580 mm, berat benda kerja (maks.): 300 kg, tinggi total: 3.300 mm, panjang total: 3.225 mm, lebar total: 2.256 mm, beban meja: 300 kg, diameter meja putar: 500 mm, berat keseluruhan: 8.500 kg, kecepatan spindel (min.): 5 rpm, kecepatan spindel (maks.): 15.000 rpm, jam operasional spindle: 40 h, pasokan pendingin: 42 batang, jarak dari tengah meja ke hidung spindel: 150 mm, daya motor spindle: 3.400 W, jumlah spindel: 1, jumlah slot dalam magazin alat: 60, panjang alat: 250 mm, diameter alat: 127 mm, berat alat: 7.000 g, suplai pendingin melalui spindel: 42 batang, sudut putar sumbu B (min.): -50 °, sudut putar sumbu B (maks.): 110 °, sudut putar poros C (maks.): 360 °, jumlah sumbu: 5, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, 1 Podjzdf Hvjpfx Aqverb

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2019, jarak pergerakan sumbu X: 1.270 mm, jarak lintasan sumbu Y: 508 mm, jarak gerak sumbu Z: 635 mm, kecepatan spindel (maks.): 12.000 rpm, jumlah sumbu: 4, This 4-axis HAAS VF-4SS was manufactured in 2019. It offers an X-axis travel of 1270 mm, a Y-axis travel of 508 mm, and a Z-axis travel of 635 mm. The machine is equipped with a spindle speed of 12,000 rpm and features a chip conveyor, a coolant filtration system, and a fourth axis drive. If you are looking for high-quality machining capabilities, consider the HAAS VF-4SS vertical machining center that we are offering for sale. Please contact us for further details. • Spindle nose to table (max): 742 mm • Spindle nose to table (min): 107 mm • Through-spindle coolant: Yes • Programmable coolant nozzle: Yes • Rigid tapping: Yes • Visual part programming system: Yes • Ethernet interface: Yes • Remote monitoring: HaasConnect + HaasDrop • Electronic handwheel with touchscreen: Included • Coolant filtration system: Included • Fourth axis drive and wiring: Included • Spindle air blast: Included Podoza A Enjpfx Aqverb • Coordinate rotation and scaling: Included • Tool presetting arm: Included • Work light: Included • Standard memory: 1 GB • Machine orientation: Vertical • Installation and basic training: Included • Warranty: 12 months Additional Equipment • Chip conveyor: Auger type • HRT210 rotary table (CNC rotary table) • Servo drive: Sigma 5 • Manual tailstock: 6" • Compatibility note: VF-4SS

Kondisi: bekas, nomor mesin/kendaraan: 7979, Table diameter: 400 mm Table with 8 T-slots: 12 mm Podpfxjb Ez R Uj Aqvsrb Height: 175 mm Required space: 600 x 450 x 175 mm Weight: approx. 100 kg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2011, jam operasional: 2.450 h, jarak pergerakan sumbu X: 6.000 mm, jarak lintasan sumbu Y: 12.001.400 mm, jarak gerak sumbu Z: 18.001.790 mm, produsen pengendali: Heidenhain, model controller: iTNC 530, berat benda kerja (maks.): 3.000 kg, tinggi total: 4.700 mm, panjang total: 12.700 mm, lebar total: 7.800 mm, diameter meja putar: 2.200 mm, kecepatan rotasi (maks.): 200 rpm, berat keseluruhan: 57.000 kg, kecepatan spindel (maks.): 8.000 rpm, jam operasional spindle: 2.450 h, pasokan pendingin: 40 batang, jumlah slot dalam magazin alat: 60, panjang alat: 460 mm, Perlengkapan: dokumentasi / manual, konveyor serpihan, CNC control: Heidenhain iTNC 530 Axes Travel X-axis mm: 6000 Travel Y-axis mm: 1200/1400 Travel Z-axis mm: 1800 (H) / 1790 (V) C-axis indexing degrees: 360º (0.001) A-axis indexing degrees: ±180° B-axis indexing degrees: ±180° Rapid traverse m/min: 30 Worktable Pallet dimensions mm: 6000 x 1235 NC milling/turning table: Pallet dimensions mm: Ø2200 Max. workpiece weight kg: 3000 Table rotation speed rpm: 200 Max. torque Nm: 4600 Spindle Max. spindle speed rpm: 8000 Spindle drive power kW: 33/24 (40%ED/continuous) Spindle torque Nm: 382/278 (40/100%ED) Cooling Coolant supply through spindle bar: 40 Tank capacity liters: 900 Prodpfszb H Tfsx Aqvob Tool system Tool holder: HSK-A 100 Number of tools in magazine: 60 With empty adjacent pockets mm: 200 With adjacent pockets occupied mm: 104 Max. tool length mm: 460 Max. tool weight kg: 25 Tool change time (chip-to-chip) sec: 9.8 Equipment Electronic handwheel Chip conveyor Infrared probe Internal coolant supply Rinsing gun Operating mode 4 Blow air through spindle center selectable via M function Work area lighting DXF import function Paper band filter Automatic work area door Mounted indexing device for shaft machining Axes can be clamped hydraulically via M function (optional) Machine operating hours: Power-on hours: 29,447 Spindle operating hours: 2,450 Basic machine: Dimensions / Weight Length mm: 12,700 Width mm: 7,800 Height mm: 4,700 Weight kg: 57,000

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, jam operasional: 18.845 h, kecepatan spindel (maks.): 4.000 rpm, jarak pergerakan sumbu X: 260 mm, jarak lintasan sumbu Y: 53 mm, jarak gerak sumbu Z: 830 mm, daya motor spindle: 33.000 W, produsen pengendali: SIEMENS, model controller: 828D, jumlah sumbu: 3, This 3-axis DOOSAN Puma 2600 SY II was manufactured in 2018 and is designed for precision horizontal turning. This machine is ideal for complex machining tasks, delivering robust performance and durability. If you are seeking high-quality turning capabilities, consider the DOOSAN Puma 2600 SY II machine we have for sale. Contact us for further information. Additional Equipment • Mekiload Gantry Loader • Renishaw Equator • Renishaw Equator • The machine includes a rotary indexing magazine • The machine includes a gantry robot Machine Benefits Qualitative Advantages • Tool change time: 1.0 second • Maximum speed (station): 5,000 rpm • Tool holder size: 25 x 25 mm • Boring bar holder: Ø50 mm • Coolant pump power: 1.5 kW Technical Advantages • Max. turning diameter over bed: 780 mm • Max. turning diameter over carriage: 630 mm • Max. turning length: 760 mm Podjyr R A Eepfx Aqvorb • Main spindle torque: 719 Nm • Main spindle nose: A2 #8 • Sub spindle speed: 6,000 rpm • Sub spindle power (30 min): 18.2 kW • Sub spindle torque: 220 Nm • Sub spindle nose: A2 #5 • Number of stations: 24 (12 driven) Additional Information Machine still under power.

Kondisi: bekas, Tahun pembuatan: 2003, spitzenhoehe-255 Pedowizltspfx Aqverb

Kondisi: bekas, TECHNICAL SPECIFICATIONS - Number of axes: 10 - Number of spindles: 2 MAIN SPINDLE - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Min. C-axis resolution: 0.001° SUB SPINDLE - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Min. C-axis resolution: 0.001° - Travel: 390 / 600 mm TURNING-MILLING SPINDLE - X travel: 350 mm - Y travel: ±80 mm - B-axis stroke: 270° - Min. B-axis resolution: 0.001° - Tool type: HSK-T40 - Spindle speed: 18,000 rpm - Spindle drive power: 11 kW - Fixed tools on electrospindle for milling: 6 x VDI25 LOWER TURNING AND MILLING SPINDLE - Y travel: ±80 mm - B-axis stroke: 270° - Min. B-axis resolution: 0.001° - Tool type: HSK-T40 - Spindle speed: 18,000 rpm - Spindle drive power: 11 kW - Fixed tools on electrospindle for milling: 6 x VDI25 TOOL CHANGER - Tool changer type: Bras charger - Number of magazine tools: 80 - Tool change time: 4.5 sec ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 68 kW WEIGHT AND DIMENSIONS - Machine height: 2,500 mm Predpfxjv Ig Avj Aqvob - Machine weight: 11,000 kg MACHINE HOURS - Spindle hours: 19,781 h - Turning-milling spindle hours: 9,713 h EQUIPMENT - Control: Siemens Sinumerik 840D SL - Coolant tank * with high-pressure pump * with paper filter * internal coolant supply (IKZ) - Chip conveyor - Spindle cooling - Parts removal

Kondisi: sangat baik (bekas), Tahun pembuatan: 1999, Pengontrol Heidenhain TNC 426 Rentang gerakan X/Y/Z: 1250 x 880 x 800 mm Kecepatan putar 8.000 putaran/menit Majalah perkakas untuk 60 perkakas, tipe SK 50 Kepala frais universal +0° / -90° Psdpfx Ajzqv A Teqverb Meja putar NC 1250 x 1000 mm Konveyor serpihan Probe pengukuran