Lift gudang

Haenel Lean-Lift 3060-825

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 532.323/10-0, tinggi total: 6.454 mm, lebar total: 6.810 mm, panjang total: 2.810 mm, kapasitas muatan per bagian penyimpanan: 180 kg, kapasitas angkut: 40.000 kg, Here, a set of 2 Hänel Lean Lifts in linked operation is being auctioned! Machine Numbers: 532.323/10-0*1 & 532.323/10-0*2 Exact Model: Hänel Lean Lift 3060-825/281/340/75/180/40HS TECHNICAL DETAILS Load Capacities (each) Max. container load: 180 kg Max. number of containers: 163 Max. total load: 40,000 kg per Lean Lift (container weight to be deducted) Access Opening 1 (Front Side) Clear opening height: 880 mm Pick-up point height: 890 mm (standard height) Distance from pick-up point to operator floor: 890 mm LED lighting: installed Manual sliding door: installed Light barrier curtain: installed Pick-up point: Optoelectronic identification system (28-fold) for precise measurement of goods fill height Drive and Travel Speed Vertical speed without container: max. 1.83 m/s Vertical speed with container: max. 0.95 m/s Horizontal speed: max. 0.5 m/s Connection: 400 V / 20 A at 50 Hz Lift power: 5 kW Vertical motor power: 4 kW Horizontal motor power: 0.37 kW Lift Control Controller type: MP 14 N-H TFT Display: Touch screen with integrated alphanumeric keypad and function key block USB Interfaces: 1 Serial Interfaces (RS-232): 2 Ethernet Interface: available, for HOST connection (communication with any ERP system) Protocol: SOAP protocol Mode of operation: HostWebSOAP for warehouse management in WMS Display language: German (DE) Additional memory card: available, for S version (stand-alone) Module 00 - remote-controlled lift operation Safety equipment: special safety equipment required for remote operation outside visual range MACHINE DETAILS Equipment height: 6,454 mm Equipment width per system/total: 3,405 / 6,810 mm Ibjdpoxr Ng Uefx Aqleb Equipment depth: 2,810 mm Empty weight without containers per system: 4,371 kg Container empty weight per system: 2,275 kg Electrical Data Phases: 3 Frequency: 50 Hz Voltage: 400 V Current consumption: 10.2 A Minimum cable cross-section: 2.5 mm² at 9.6 A Maximum circuit protection: 20 A / 400 V Colour: Pearl grey EQUIPMENT FEATURES - Hänel Pick-o-Light-Vario (2-axis movable LED light field for color marking of requested items) - Height sensors for automatic detection of fill height and height-optimized storage - Hänel grid wall: 131 usable shelf profiles, grid profile 75 mm, container usable heights: 55 - 730 mm in 25 mm grid - High-speed generation for high vertical and horizontal travel speeds - ESB package: Redundancy system consisting of 8 integrated safety circuits + 2nd safety circuit

Tahun pembuatan: 2008, Kondisi: siap digunakan (bekas), berat keseluruhan: 3.800 kg, kecepatan spindel (maks.): 600 rpm, jumlah sumbu: 5, This 5-axis SAACKE UWIF cylindrical grinding machine was manufactured in 2008. It features a maximum spindle speed of 600 rpm and a powerful grinding spindle rated at 16 kW peak power. The machine accommodates a wide range of workpiece sizes, with a maximum diameter of Ø 20 mm and a load capacity of 1 kg. If you are looking for high-quality grinding capabilities, you should consider the SAACKE UWIF cylindrical grinding machine we are offering for sale. Please contact us for further details. • Workpiece carrier A-axis: Direct drive/hollow shaft motor; positioning accuracy ±15''; index range 1–999; cumulative lead error over 100 mm: 8 µm; max. speed 600 rpm • Tool holder: ISO 50 • Spindle chuck sleeve clearance: max. 28 mm (with automatic clamping: Ø 20 mm) • Rated drive power: • Grinding spindle S1-100%: 7.5 kW; peak: 16 kW • X-axis longitudinal travel: 2 kW • A-axis workpiece carrier: 2 kW • Z-axis cross slide: 2 kW • Y-axis grinding head slide vertical: 2 kW • B-axis grinding head rotation (rotary table): 2 kW • Positioning systems: Ijdsyiz R Ujpfx Aqljbb • A-axis: direct measuring system • B-, X-, Y-, Z-axis: indirect measuring system • Resolution X/Y/Z: 0.0001 mm (0.1 µm) • Resolution A/B: 0.0001° • Electrical connection: 20 kW / 50 A; operating voltage 400 V, 50 Hz; control voltage 24 V; lighting voltage 230 V; circuit breaker: separate supply from the mains • Compressed air: 15–17 Nm³/h; min/max pressure 6/8 bar (600/800 kPa); quality ≥ Class 4 (ISO 8573-1) • Control & software: CNC NUM Axium Power 1050 with PC, program memory 512 k; software NUMROTOplus (dongle/hardlock required); zero points calibrated (calibration instructions supplied – no marked reference points) Additional equipment • Workpiece changer options (automation): • Option 1: Pick-up system • Max. workpiece: Ø 20 mm × 120 mm; 1 kg • Capacity per pallet: • Ø 3.0–5.0 mm shank: 40 pieces • Ø 5.1–8.0 mm: 32 pieces • Ø 8.1–11.0 mm: 28 pieces • Ø 11.1–14.0 mm: 24 pieces • Ø 14.1–20.0 mm: 20 pieces • Option 2: Chain loader magazine (with gripper unit) • Capacity: 64 workpieces • Max. workpiece: Ø 32 mm × 200 mm; 2.5 kg • Features: Random loading of different workpieces; automatic quick-change collets supported • Chuck sleeves: Ø 6, 8, 10, 12, 14, 16, 20 • External chain loader option: increases machine weight to approx. 3,800 kg and footprint to 3,000 mm × 1,875 mm • Coolant filtration system (TRANSOR): to be provided by customer; air for back-flushing approx. 700 Nl/min for 5 min every 6–9 hours

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2022, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 532.323/20-0, tinggi total: 6.454 mm, lebar total: 6.810 mm, panjang total: 2.810 mm, kapasitas muatan per bagian penyimpanan: 180 kg, kapasitas angkut: 40.000 kg, Here, a set of 2 Hänel Lean Lifts in linked operation is being auctioned! Ibjdpfjxyyguox Aqlsb Machine Numbers: 532.323/10-0*1 & 532.323/10-0*2 Exact Model: Hänel Lean Lift 3060-825/281/340/75/180/40HS TECHNICAL DETAILS Load Capacities (each) Max. container load: 180 kg Max. number of containers: 163 Max. total load: 40,000 kg per Lean Lift (container weight to be deducted) Access Opening 1 (Front Side) Clear opening height: 880 mm Pick-up point height: 890 mm (standard height) Distance from pick-up point to operator floor: 890 mm LED lighting: installed Manual sliding door: installed Light barrier curtain: installed Pick-up point: Optoelectronic identification system (28-fold) for precise measurement of goods fill height Drive and Travel Speed Vertical speed without container: max. 1.83 m/s Vertical speed with container: max. 0.95 m/s Horizontal speed: max. 0.5 m/s Connection: 400 V / 20 A at 50 Hz Lift power: 5 kW Vertical motor power: 4 kW Horizontal motor power: 0.37 kW Lift Control Controller type: MP 14 N-H TFT Display: Touch screen with integrated alphanumeric keypad and function key block USB Interfaces: 1 Serial Interfaces (RS-232): 2 Ethernet Interface: available, for HOST connection (communication with any ERP system) Protocol: SOAP protocol Mode of operation: HostWebSOAP for warehouse management in WMS Display language: German (DE) Additional memory card: available, for S version (stand-alone) Module 00 - remote-controlled lift operation Safety equipment: special safety equipment required for remote operation outside visual range MACHINE DETAILS Equipment height: 6,454 mm Equipment width per system/total: 3,405 / 6,810 mm Equipment depth: 2,810 mm Empty weight without containers per system: 4,371 kg Container empty weight per system: 2,275 kg Electrical Data Phases: 3 Frequency: 50 Hz Voltage: 400 V Current consumption: 10.2 A Minimum cable cross-section: 2.5 mm² at 9.6 A Maximum circuit protection: 20 A / 400 V Colour: Pearl grey EQUIPMENT FEATURES - Hänel Pick-o-Light-Vario (2-axis movable LED light field for color marking of requested items) - Height sensors for automatic detection of fill height and height-optimized storage - Hänel grid wall: 131 usable shelf profiles, grid profile 75 mm, container usable heights: 55 - 730 mm in 25 mm grid - High-speed generation for high vertical and horizontal travel speeds - ESB package: Redundancy system consisting of 8 integrated safety circuits + 2nd safety circuit

Kondisi: diremajakan ulang (bekas), fr-Herma étiqueteuse semi-automatique à enveloppement, codeur hotfoil Allen, avec pièces de rechange et manuel, l'ensemble monté sur table en inox, monophasé Ibsdpsib Dcrsfx Aqlsb

Kondisi: bekas, Konstruksi baja untuk sistem derek Lebar: sekitar 8,5 m Panjang: sekitar 7,95 m Sistem sudah dibongkar Ibsdpjbruzgofx Aqlob Sistem ini dijual, “apa adanya” Inspeksi: Anda dipersilakan untuk memeriksa barang ini – cukup hubungi kami dan atur janji temu dalam waktu dekat. Perhatian: tidak ada garansi, tidak ada penukaran, dan tidak ada pengembalian yang diperbolehkan.

Kondisi: bekas, Tahun pembuatan: 1996, tinggi total: 2.150 mm, panjang total: 1.420 mm, lebar total: 2.010 mm, berat keseluruhan: 3.100 kg, kecepatan spindle penggilingan: 6.000 rpm, jarak pergerakan sumbu X: 400 mm, jarak lintasan sumbu Y: 250 mm, jarak gerak sumbu Z: 580 mm, Walter AG Helitronic Power CNC Universal 5-Axis Tool Grinding Machine CNC Control HMC 400 CNC Ijdpfx Aqszavqwjlebb Travel X-axis: 400 mm Travel Y-axis: 250 mm Travel Z-axis: 580 mm C-axis (table rotation): ±200° Max. grinding wheel diameter: Ø 200 mm Spindle speed (grinding): 3000 / 6000 rpm If you have any questions about the machine, please feel free to contact us by phone or email. Please have a look at our other listings to get a complete overview of our inventory.

Kondisi: hampir baru (bekas), Tahun pembuatan: 2002, jam operasional: 500 h, Fungsionalitas: berfungsi sepenuhnya, Grinding diameter – max. 238 - 620 mm Grinding length 190 mm Workpiece length 380 - 940 mm Spindle speeds – infinitely variable 2 - 12,000 rpm Power requirement 380 kVA Drive power – grinding motor 1.1 kW Total power consumption 2.2 kW Machine weight approx. 0.6 t !!! We stock nearly all spare parts for Deckel S 11 machines !!! !!! Accessories can be configured as desired !!! We will gladly accept your used Deckel S 11 as a trade-in – contact us! DECKEL S 11 UNIVERSAL TOOL GRINDING MACHINE 2189 400 V, 50 Hz, with CEE plug and cable Colour: Superstructure Pastel Turquoise RAL 6034 Base Blue Grey RAL 7031 Motorised height adjustment, axial grinding spindle adjustment Machine like new!! * Accessories: * Index head SK 40 with 24-position dividing plate * Dividing plate 20-position * Pull stud M16 69871 * Helical and relief grinding attachment with rack housing * Tailstock support with 4 tailstock centres * Centre with driver * Wheel dressing device * Diamond dresser * Radius grinding attachment SK 40 complete with setting gauge * Tool holder for above * Support finger with sliding blades * Support finger holder * Complete dust extraction (without extractor unit) * Halogen lamp * Tooth support complete * Setting gauge * Collet and ejection nut with key * 35 collets from 1.0 - 18.0 mm in 0.5 mm increments * 1 set direct clamping collets SK 40: 6, 8, 10, 12, 14, 16, 18, 20, 22, 25 mm * 6-jaw grinding chuck * 3 taper reducing sleeves SK 40 x MK 1, 2, 3, 4 * Clamping nut * 20 grinding wheel arbors * 2 protective hoods * Assorted diamond/CBN grinding wheels * Operating manual, operating keys, spare parts list, circuit diagram * Complete set of grinding instructions Isdpfxow U Eg Rs Aqlobb The machine is partially overhauled and comes with electrical test protocol !! At extra cost, various measuring optics (new or used) with cross-slide can be supplied !!

Tahun pembuatan: 2016, Kondisi: siap digunakan (bekas), The Coiltech Decoiler Straightener Feeder System is a compact feeding solution designed for press applications. Strip width: 600 mm, material thickness: up to 6.5 mm, straightening rollers: 7 x 115 mm, decoiler capacity: 6,000 kg, inner coil diameter (min-max): 470–520 mm. Connected load: 7.5 kW, supplied with documentation. Iodpfxsi El Uco Aqlsbb

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Max. Ø 114 mm; Straight and bent round tubes; One grinding station; Grinding of straight and bent round tubes up to Ø114 mm with maximum flexibility. The ML100 tube grinding machine is the ideal choice for surface grinding and polishing of round, oval, and elliptical tubes. The ML planetary belt system enables belt grinding without rotating the tube to ensure the best achievable results. The feed system safely advances straight tubes into the grinding station to guarantee a consistent, high-quality surface finish and maximum productivity. Ibjdpfxotzkgbo Aqlsb ML100 Technical Data: - Working capacity (Ø mm): 3 - 114 - Number of stations: 1 - Grinding belt dimensions (mm): (2x) 50x940 - Grinding belt speed (m/s): 3–22 - Feed speed (m/s): 1–5 - Grinding belt motor (kW): 3 - Wheel motor (kW): 1.5 - Feed motor (kW): (2x) 0.12 - Total power (kW): 5 - Power consumption (A): 11 - Dust extraction connection (Ø mm): 80 - Dimensions (mm): 750x1000x1300 - Weight (kg): 250

Kondisi: bekas, Konstruksi baja untuk sistem derek Lebar: sekitar 8,3 m Panjang: sekitar 5,1 m Sistem sudah dibongkar Sistem ini dijual, "apa adanya" Ibsdpobruzbefx Aqlob Inspeksi: Anda dipersilakan untuk memeriksa barang ini – hubungi kami dan buatlah janji temu dalam waktu dekat. Perhatian: tidak ada garansi, tidak ada penukaran, dan tidak ada pengembalian.