Perpisahan babak tabel

Hahn+Kolb

Kondisi: bekas, HAHN + KOLB ZL 800 adalah mesin pengamplasan halus/pemoles, yang dirancang untuk presisi, akurasi tinggi, dan pengoperasian yang andal. Kapasitas: diameter cakram maks. 810 mm, panjang benda kerja maksimum 250 mm, diameter penggerak Ø 306 mm; cakram atas dan bawah 4 tingkat, 30 putaran/menit – 84 putaran/menit. Data teknis: motor utama 3,0/4,0 kW, kebutuhan daya total 11 kW, berat sekitar 3500 kg, dimensi P1720×L2100×T2100 mm. Aksesori: satu set cakram pengamplas, sistem pendingin. Mencapai toleransi yang ketat; umum digunakan dalam industri otomotif, industri jam tangan, mesin perkakas, penerbangan, dan teknologi medis. Gedpszqbh Ujfx Aclska

Kondisi: sangat baik (bekas), Portal machine Movable panel, movable working head (horizontal workpiece) Numerical control Power Control, WoodWOP software Safety enclosure for the working head. Full machine safety housing Infeed table (workpiece support) at the entry side. Outfeed table (with conveyor belts) Workpiece feed by no. 3 conveyor belts (feed speed max. approx. 130 m/min) Minimum workpiece dimensions (X-Y-Z) mm 250 x 100 x 15 Maximum workpiece dimensions (X-Y-Z) mm 2500 x 1050 x 60 Motorized conveyor belt for waste disposal Separate electrical and control cabinets. Installed total power (kW): 99 No. 2 WORKING UNITS (TOP): - (SERVO MOTOR X-Y-Z): No. 4 drilling units (4 x 2.3 kW) with 10 vertical spindles each (total vertical spindles: 40) No. 3 WORKING UNITS (BOTTOM): - (SERVO MOTOR X-Y-Z): No. 6 drilling units (6 x 2.3 kW) with 40 vertical spindles each (total vertical spindles: 240) No. 2 WORKING UNITS (HORIZONTAL): No. 2 drilling units with horizontal spindles No. 21 horizontal drilling spindles (right side) + No. 21 horizontal drilling spindles (left side) No. 8 injection nozzles for glue supply and dowel insertion (right side) No. 8 injection nozzles for glue supply and dowel insertion (left side) Gkedpfegwbbqjx Acloa No. 2 dowel magazines for automatic dowel insertion OPTIONAL: BARCODE (WIRELESS SCANNER)

Kondisi: bekas, Tahun pembuatan: 1990, Berat 1,3 ton Panjang putaran 40 mm Gjdpozndt Ujfx Acleka Silinder 0-0,5 Kecepatan cepat 3,7 m/menit

Kondisi: siap digunakan (bekas), Vertical bandsaw Hahn + Kolb with Ideal bandsaw blade welding unit and filing machine Gksdpfx Acery U Nholja

Kondisi: sangat baik (bekas), twosided single machine (or 1st and/or 2nd machine in a production line) Edge thickness with rolls (min/max) mm 0.3 / 3 Edge thickness with strip veneer (min/max) mm 3 / 10 Panel thickness (min/max) mm 8 / 60 Working width (min/max) mm 236 / 3300 Control/Software: ICOS Open Feed speed (m/min): 10 - 50, no power transmission bar (Master & Slave systems) Retractable reference stops, spacing (mm): 1080 PROCESSING UNIT (for each side): Protective milling unit (pre-milling) 75.186 (1 x kW 4.4) Chipper unit (2 x kW 8) Jointing cutter unit 08.376 (1 x kW ?) EDGE BANDING SECTION (for each side): Gluing unit (hot-melt glue) 283.1513 04.1570 + 283.205 Gkedpfod Nt Rqjx Acloa Edge pressure zone - edge magazine for rolls (compartment no. 6) End trimming unit 08.42 (2 x kW 0.66) 30 m/min (0°-25°) Milling unit 08.055 (2 x kW 1) 0° - 30° Multi-function unit (radius milling and profile milling) 08.342 (2 x kW 0.66) servomotors Profile scraper unit 08.519 Flat scraper unit 08.521 Spraying unit (for polishing fluid) Buffing unit 08.617-4 (4 x kW 0.18) Universal milling unit for grooving/rebating and profiling 08.190 (1 x kW 4.5) 90°-180°-270°

Kondisi: bekas, Tahun pembuatan: 1974, Total electrical load approx. 11 kW - 380 V - 50 Hz Weight approx. 4,200 kg Special equipment and accessories: • HAHN & KOLB / LAUER measuring and control system with through-spindle sensor. The sensor continuously measures during operation and automatically ends the cycle upon reaching the target thickness. • Pressure stages can be set via HELLER hydraulics, grinding stages via timer. Gkodsub Alzopfx Acloa • Machine currently equipped with fine grinding wheels for double-sided precision grinding of flat, parallel workpieces. • Laterally mounted, height-adjustable and swiveling motorized dressing unit with electromechanical feed. • Lapping or flushing agent dosing system with reservoir. • Versatile drive and pressure adjustment options such as co-/counter-rotation, individual drive, drag of one or both discs, left-/right-hand rotation, etc. • Motor-driven, height-adjustable planetary drive unit for the transport wheels. Condition: not yet commissioned; special price possible for "as is" purchase Delivery: ex stock, immediately available, FCA Metzingen Payment: net - upon receipt of invoice We have further double-sided lapping and fine grinding machines in stock. Please inquire.

Kondisi: bekas, Tahun pembuatan: 1975, HAHN & KOLB Double-sided lapping and fine grinding machine Model: ZL 800 H Year of manufacture: approx. 1975 240 049 Gjdpfx Asub Al Iecleka _____ Lapping/grinding wheel diameter possible: 755 - 810 mm Grinding ring width possible: 200 - 265 mm Currently assembled wheel diameter / ring width: 790 / 245 mm Max. workpiece transport disc diameter approx.: 306 mm Max. distance between cast iron lapping wheels: 125 mm Max. distance between fine grinding wheels: 83/78 mm Max. distance between mounting flanges: 260 mm Lapping wheel speeds, upper: 30 / 42 / 60 / 84 rpm Lapping wheel speeds, lower: 30 / 42 / 60 / 84 rpm Workpiece transport disc center drive: 28 / 40 / 56 / 80 rpm Spindle drive each: 6 / 8 kW Total power consumption: approx. 11 kW - 380 V - 50 Hz Machine weight approx.: 4,200 kg Special equipment / accessories: • HAHN & KOLB / LAUER measurement and control unit with sensor guided through the hollow spindle. The sensor continuously measures during the process and automatically terminates the cycle once the target thickness is reached. • Pressure level adjustment via HELLER hydraulic system, grinding phase time settings via timer possible. • Machine is currently equipped with fine grinding wheels for dual-sided, high-precision fine grinding of flat-parallel workpieces. • Laterally mounted, height-adjustable and swiveling motorized dressing device with electromotive feed. • Lapping or rinsing agent dosing device with tank. • Various drive and pressure adjustment options, such as: co-rotation/counter-rotation, single drive, entrainment of one or both wheels, left/right-hand rotation, etc. • Motorized height-adjustable planetary drive device for the transport wheels. Condition: slight noise in lower gearbox, otherwise in good condition Delivery: ex stock, immediate, FCA Metzingen Payment: net, upon receipt of invoice. We have further double-sided lapping and fine grinding machines in stock. Please inquire with us.

Kondisi: diremaj di bengkel (bekas), DOUBLE-SIDED EDGE-BANDING AND FORMATTING MACHINE – 1st machine in line Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 8 / 45 Working width (min/max) mm: 236 / 1300 Control/Software: ICOS Open Feed speed (adjustable) m/min: 10 / 50 No transmission bar (Master & Slave systems) Safety and noise protection cabin Godpfxsdh Tfgo Acljka FORMATTING UNITS (per side): Spray unit (for liquid anti-adhesive) Exchangeable milling unit 08.0555 max. 3° (2 x 1 kW) Free space EDGE BANDING SECTION (per side): Edging unit (Hot Melt + pre-melter) 04.1570 Edge pressure zone Edge magazine for rolls (compartment No.) 6 Pre-milling unit 08.0555 (2 x 1 kW) max. 3° Milling unit 08.055 (2 x 0.66 kW) 30° + 30 m/min Flat scraper unit 08.517 Spray unit (for polishing agent) Buffing unit 08.617-2 (2 x 0.18 kW) Free space

Kondisi: bekas, Hardness tester, hardness measuring machine, hardness tester, hardness testing device, impact hardness tester - Delivery: as is, as inspected Gkodpehck U Sefx Aclja - Tool set: incomplete - Hahn & Kolb: portable hardness tester - Individual components: see photos - Box dimensions: 355/190/H95 mm - Weight: 5.4 kg

Kondisi: baik (bekas), de_001 Gkodpoy Iwadsfx Aclja

Kondisi: seperti baru (mesin pameran), A fully hydraulic demonstration folding machine WIEGAND with NC-10 control system Manual or automatic bending mode Automatic mode: Gsdpfx Aepgmqiecloka Upper beam closes, bends to preset angle, Upper beam opens Bending beam or upper beam can be manually adjusted to sheet thickness Adjustable upper beam opening width Backgauge adjustable manually CE standard Documentation Bending length: 2500 mm Bending capacity: 2.5 mm Max. bending angle: 0 – 120° Backgauge manual adjustment, min/max: 60/1000 mm Power: 3.0 kW Weight: 2500 kg Technical data and dimensions: subject to change For further technical data, see PDF document

Kondisi: baik (bekas), de-to-hu-it-lt-lv-nb-nl-pl Gkedpfx Acszb Rapjlsa

Kondisi: siap digunakan (bekas), läppmaschine_hahn_kolb_lhd_0 Gedpozbz Ttofx Aclska

Kondisi: sangat baik (bekas), AUTOMATIC MULTI-BORER "WEEKE" Machine can be integrated in-line with other machines Control: Power Control Gkedpfjh Ryhnex Acloa Software: WoodWop (TOPDRILL BST 500) Feed belts (number): 2 (adjustable feed speed) Horizontal drilling supports (number): 2 Drilling units per horizontal support (number): 2 Spindles per horizontal drilling unit (number): 11 Max. working width (mm): 3000 Min. working width (mm): 250 Lower vertical drilling supports (number): 6 Drilling units per lower vertical support (number): 2 Spindles per drilling unit on lower support (number): various Upper vertical drilling supports (number): 2 Spindles per drilling unit on upper support (number): 2 Upper vertical workpiece clamps (number): 6 Chip extraction conveyor belt Digital display of positioning data (axis) Total connected load (kW): 26

Kondisi: bekas, 18b1272b-af2b-4b68-b389-b40e869d5c31 Godpfx Ajy S Dylscljka