Sistem pelapisan bubuk otomatis

Handelsagentur Klaus Benecke Durchlaufanlage Taktverfahren automat.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, DESCRIPTION Hermle C 800 V CNC Vertical Machining Center, built in 08/2000 in Germany. This milling center operates on three axes, with maximum X / Y / Z travels of 800, 600, and 500 mm, respectively. The machine is equipped with a Sinumerik 840D CNC control, connected via LAN cable to an external computer. Additionally, the machine is fitted with a chip conveyor, hydraulic clamping, a magazine for 87 tools, a swivel finder, and a control cabinet air conditioning unit. The spindle reaches a maximum speed of 15,000 rpm. Spindle hours approx. 4,500 hrs. The total weight of the machining center is approx. 7 tons. Technical Data of Hermle C 800 V CNC Machining Center: – Travel X / Y / Z axes: 800 / 600 / 500 mm – Rapid traverse: 35 m/min – Maximum spindle speed: 15,000 rpm – Oil mist extraction – Spindle power: 19 kW – Operating voltage: 400V; 3PH; 50Hz – Control voltage: 220V AC; 24V DC – Machine dimensions (L x W x H): 2.3 x 3 x 2.65 m – Total weight: 7,000 kg Equipment of the Hermle C800V CNC Machining Center: – CNC control: Sinumerik 840D – Tool magazine capacity: 87 slots – Toolholder type: SK40 – Coolant pump through the tool: 40 bar – Control cabinet air conditioning unit Iodpfsiva Dksx Ab Ioa – Swivel finder – Chip conveyor Separately available as shown in the photos! – Tool presetting device – Various SK40 tool holders – Heidenhain TS32 probe, as new

Kondisi: hampir baru (bekas), Tahun pembuatan: 2023, Mesin ini dirancang secara khusus untuk perusahaan yang mencari solusi pengemasan yang sederhana dan andal. Kecepatan maksimum mencapai hingga 1500 kantong per jam. Pengoperasiannya sangat mudah, hanya dengan dua langkah sederhana: mengisi kantong dari atas dan menutup kantong. Dijual Autobag-bags dalam ukuran: 150x250: 1,5 juta kantong 200x320: 2,5 juta kantong Isdpfjr E Dpzox Ab Ioa Harga per palet Euro penuh: 1 palet: €0,025 per kantong 2 palet: €0,019 per kantong 3 palet: €0,018 per kantong 4 palet: €0,017 per kantong 5 palet: €0,016 per kantong dan seterusnya 10 palet atau lebih: €0,01 per kantong 1 juta kantong Autobag mulai dari €0,01 per kantong

Kondisi: bekas, Tahun pembuatan: 2009, 32328-EN Ijdpfx Abewluhmj Iea

Kondisi: diremaj di bengkel (bekas), Modernized machine with new LTG-StoreControl P control system 3 identical vertical carousel storage systems (paternosters) available External dimensions: Total height: 6,500 mm Total width: 3,670 mm Total depth: 1,560 mm 46 carriers, each with a maximum load capacity of 305 kg Usable internal dimensions per carrier: Height: 210 mm Width: 3,050 mm Depth: 520 mm Chain pitch: 254 mm Additionally included: 46 intermediate shelves for halving the available storage height Total load capacity up to 14,200 kg Deposit table at 1,000 mm above FFL, with stainless steel (NiRo) worktop Color: GREY / DARK GREY, surface cleaned, signs of use possible Iodpfx Abjrw A Eio Isa Drive motor power: 1 x 5.5 kW / 400 Volt Subject to errors, technical changes, and detail deviations from the photos. Delivery and installation currently mainly in Germany, Austria, and several neighboring countries.

Tahun pembuatan: 2018, Kondisi: seperti baru (mesin pameran), Mitre saw with a blade diameter of 600 mm (optionally 800 mm) - Manual mitre adjustment Isdpfx Ajd Rhzweb Isa - Pneumatic table clamping - Pneumatic workpiece clamping (clamping cylinders’ height and inclination angle continuously adjustable) - Two-hand safety control Optional features: - Automatic mitre adjustment - Roller conveyor with length stop or positioning system - Automated saw version - Pre-load magazine - Horizontal clamping device - Extraction system - Further accessories available on request We would be pleased to provide you with a quotation tailored to your specific requirements. The machine can be inspected and tested at 56812.

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2011, Bystronic / 2300 x 4500 mm R-L 2300 x 4500 mm (however, new press in 2011: 2700 x 3500 mm) Iedpfx Aerr Tmcsb Ija 15-60 mm 1000 kg Washer GW D 2300 VR 3 B 15 Gas press ZPG 2700 x 3500 mm VR SP 1 AS 15-60 mm 2300 x 4500 mm 1000 kg, year 2011 Sealing Robot VA 1K-V 2300 x 4500 mm VR MOD PU ZD 15-60 mm 1000 kg Single-head sealing machine / 1 / GMR Stock Location: GMR ES

Kondisi: baik (bekas), Tahun pembuatan: 1979, Komplette Produktionslinie für technische und kommerzielle Ketten Hersteller – WAFIOS / VITARI / DANIELI / IPSEN Baujahr – 1979/1989 Die Fabrik umfasst: Iodpfxeqy E I Uj Ab Ija - Schweißmaschinen: 14 Stück - Biegemaschinen: 10 Stück - Biege- und Schweißmaschinen: 2 Stück (Wafios KEH3 + KER3; Wafios KEH5 + KER5) - Drahtziehlinie mit 7 Zügen – Danieli mit Aufspuler - Einsatzhärtungsofen - Glühofen Viele Ersatzteile vorhanden

Kondisi: diremaj di bengkel (bekas), Modernized machines with new LTG control system StoreControl L External dimensions: Construction height: 6,000 mm Construction width: 1,630 mm Construction depth: 2,980 mm 30 carriers, each with a load capacity of 500 kg Usable (clear) dimensions per carrier: Width: 1,300 mm Depth: 863 mm Height: from 50 mm to 750 mm Total load capacity up to 40,000 kg Start of access opening at 870 mm above finished floor level, access opening height 845 mm Isden D A Rrepfx Ab Iea Color scheme: GREY / BLUE, carriers sendzimir-galvanized Surface cleaned, signs of use possible Performance data: Vertical drive: 1 x 2.2 kW / 400 Volt Horizontal drive: 1 x 0.29 kW / 400 Volt Additional features: Manual lift door Subject to errors, technical modifications, and possible deviations from photos. Delivery & installation currently mainly in Germany, Austria, and neighboring countries.

Kondisi: baru, Extraction performance at nozzle* (filter unit): 350 m³/h Total power consumption*: 0.09 kW Operating voltage: 230 V, 50/60 Hz, 1PH + N + PE Noise level*: 52 dB(A) Isdpfx Abjh Rdwxo Isa Dimensions L/W/H in mm: L 329 / W 374 / H 510 Colour: RAL 7035 Weight: 25 kg Manufacturer: ISI Industrieprodukte *Depending on filter configuration Special voltages or custom colours available on request Application: Extraction of oil mist and smoke, suitable for small to very large machine work areas | Oil mist separator Your advantages with the ELBARON series: - 18 device variants available - Direct from the manufacturer - ISI-TRONIC included as standard (digital filter control) - Electronically controlled EC fan included as standard - Adjustable fan speed and air volume - Available as Simplex (single-stage) or Duplex (two-stage) - Wide range of airflow capacities available - Can be adapted to pollutant load and airflow requirements - Extensive range of mounting and connection accessories - Quality Made in Germany The ELBARON® filter series has been developed for use in machining processes with pure oil or for the separation of oil mist and smoke (oil mist separator). For many years, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are used worldwide. Our filter units are already digitally equipped as standard and can, for example, be controlled via laptop. The ELBARON® device series comprises 18 variants and can be optimally configured in size and performance for your specific application. ELBARON® devices stand out for their long service life and absolute operational reliability. Our electrostatic filter cells are dimensioned to achieve optimal filtration efficiency, maximum service life, and trouble-free operation while maintaining economic efficiency.

Kondisi: baru, Tahun pembuatan: 2024, tekanan: 8 batang, Mitre adjustment horizontal 15°-90°-15°, infinitely variable. Saw motor 5.50 kW (400 Volt). Saw blade 600 mm. Fence travel range at the rear 180 mm. Working height adjustable from 940 to 1000 mm via adjustable feet. 2 extraction ports (top of hood and bottom). Net weight 600 kg. Dimensions WxDxH 135x140x150 cm. RAL 9007 Grey Aluminium. Turntable made of ground nickel steel. Saw head with recirculating ball guides, designed for high precision, durability, and rigidity. Material can be pre-clamped with low pressure when the hood is open. Hydropneumatic blade feed. Chip flow directed toward extraction hood. Equipment: • Precision under-table circular saw • Mitre angle adjustment 0º/45º/90º/-45º/-60º, stepless • Includes 2 pneumatic clamps (vertical) • Infinitely adjustable saw blade feed • Two-hand safety control • Adjustable material stop (rear) • Chip extraction system • Spray mist device for air-oil cooling Iedpfx Ajgwt S Tob Ioa • Air gun with spiral hose • Maintenance unit with pressure reducer included • Ergonomically arranged control panel • Max. cutting height 230 mm • Saw blade 600 mm • Saw blade not included in delivery! Our NC pushing system ensures that your workpieces are positioned at the desired processing point on our UK 600 HA 90°. A gripper clamps the material, and the NC control automatically positions it. Afterwards, clamping and the sawing process are initiated. Positions are pre-programmed into the control system. Once the machine finishes the operation, it automatically moves to the next sawing position. Depending on the workpiece, several parts can be clamped and positioned simultaneously, either stacked or side by side. You are welcome to visit and inspect the desired system at our production or demonstration hall at any time. Please feel free to contact us. Plantec Maschinen GmbH