Jig mesin grinding

HAUSER 3. S.M.O.

Kondisi: baik (bekas), Coordinate grinding machine Jig grinding machine Manufacturer: Henri Hauser SA. Model: 3.S.M.O. Serial No.: 76 No.: 218···600 2-axis digital readout FAGOR. Machine type: jig grinding machine Control type: conventional X-axis travel: 400 mm Y-axis travel: 250 mm Workpiece height: 500 mm Grinding diameter: 220 mm Table surface: 600 x 320 mm Throat: 310 mm Angle range: 12° Vertical grinding carriage adjustment: 110 mm Lifting speeds: 0 - 6 m/min. Djdpfxsktkmvs Ahuecf Spindle speed: max. 50,000 rpm Peripheral speed: max. 35 m/sec. Max. workpiece weight on table: 80 kg.

Tahun pembuatan: 2018, Kondisi: sangat baik (bekas),

Kondisi: bekas, Tahun pembuatan: 1968, technical-details-x-travel-400-mm-y-travel-250-mm-workpiece-heig ht-500-mm-grinding-diameter-220-mm-table-surface-600-x-320-mm-rea ch-310-mm-swivel-range-12-degrees-grinding-slide-adjustment-verti cal-110-mm-stroke-speeds-0-6-m-min-grinding-spindle-speed-up-to-5 0000-rpm-peripheral-speed-max-35-m-s-power-consumption-approx-7-k va-drive-power-6-kw-machine-weight-approx-2-t-space-requirement-a pprox-3-x-3-x-3-m-round-table-d-300-mm-frequency-inverter-landert -sgi Dcodpfx Aovbzwzohujf

Tahun pembuatan: 2024, Kondisi: baru, Manufacturer: DURMA Model: MS 2504 Year of manufacture: 2022 Cutting length: 2550 mm Sheet thickness: 4 mm Control system: EZM9910 Operating hours: 0 Dcedpsd R Er Defx Ahusf Cutting angle: 1°30 Strokes per minute: 42 Motor power: 7.5 kW Backgauge range: 750 mm Table width: 450 mm Table height: 800 mm Dimensions (L/W/H): 3200x2300x1350 mm Weight: 3,780 kg Standard equipment: - EZM9910 control unit - Backgauge range of 750 mm, programmable via control unit - Plastic inserts for hold-downs - 1 side stop and 2 sheet support arms - Finger guard - Portable foot switch with emergency stop - Spring-loaded stop in T-slot of support arms - Ball screw spindle - Table plates with ball rollers - Upper blade with 2 cutting edges - Lower blade with 4 cutting edges - CE marking Optional equipment: - Adjustable angle stop 0-180° The machine can be inspected and demonstrated at our demonstration center in Staufenberg by appointment at any time. Further machines are available for demonstration at our facility in Staufenberg. Further information available on request.

Kondisi: baik (bekas), Tahun pembuatan: 2000, nomor mesin/kendaraan: 13639, Steuerung: Heidenhain Verfahrwege: X-Achse: 1.200 mm Y-Achse: 800 mm Z-Achse: 500 mm Dodpfx Ahoinh Rqouscf Hauptspindel: Drehzahl: 16.000 min⁻¹ Antriebsleistung Hauptspindel: 17 kW Werkzeugaufnahme Spindel: HSK63 Spindeldurchmesser vorne am Lager: 70 mm Aufgerüsteter Werkzeugwechsler, Kapazität: 100 Plätze Schwenkrundtisch: Tischdurchmesser: 800 mm Schwenkbereich A-Achse: -15° / +97° Drehbereich C-Achse: 360° Maximale Tischbelastung: ca. 1.000 kg Maximaler Werkzeugdurchmesser: 80 mm Maximaler Werkzeugdurchmesser bei freiem Nebenfach: 125 mm Maximale Werkzeuglänge: 300 mm Maximales Werkzeuggewicht: 8 kg Vorschübe: Eilgang (X/Y/Z): 30 m/min Elektrischer Gesamtanschlusswert: 31 kVA Maschinengewicht: 15 t Platzbedarf ca.: 6,0 x 5,0 x 3,6 m Weitere Ausstattung: - Dokumentation - Späneförderer - Elektronische Wärmekompensation Y- und Z-Achse

Tahun pembuatan: 2002, Kondisi: diremaj di bengkel (bekas), Beam cutting, drilling, and marking line CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial No.: 122,400 Weight without accessories: 10,980kg - Circular saw with downward cutting motion. - Saw unit with gear system, drive system, and saw blade mounted on a heavy-duty, wear-resistant rotary bearing. - Heavy-duty saw gear with helical, hardened, and ground gearing operating in an oil bath. - Hydraulic saw blade feed, adjustable according to cutting chart, with very rapid return stroke. - Hydraulic horizontal clamping device. Rear clamping jaw with long-stroke clamping cylinder and automatic return stroke limitation. - Vertical clamping block with self-adjusting pressure plate. - Mitre cutting device for adjusting the angle from 45° left to 35° right. - Material sensor for automatic switch from rapid to working feed. - Hydraulically liftable feed roller for optimal material transport across the saw table. - Economical lubrication system with micro-dosing unit, particularly suitable for cutting profiles. - Chip collector installed on the machine frame. Specifications: - Saw blade housing: 100x4x30x250mm - Saw blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20m/min - Saw feed rate: 0-400mm/min - Rapid return speed: 2,000mm/min - Total power: 25KW - Working height: 640mm Cutting Capacities: 90º Cuts - Angle steel: 250mm - U steel: 400mm - Double-T beam: 600mm - Wide flange beams: 1,008x302mm - Special wide flange beams: 1,000x450mm Mitre Cuts: IPBv beam Dcsdpfx Ahshzbipouef - 75º: 1,008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478x307mm IPBs beam - 75º: 1,008x402mm - 45º: 524x357mm IPE beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial No.: 122,401 Working Capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U steel (min - max): 80x45mm - 400x110mm - Double-T beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra wide flange beam: 1,200x500mm Drilling units: 3 - Vertical (Y axis): 1 unit - Horizontal (Z and W axes): 2 units Drilling diameter: 8 - 40mm RPM: 150 - 1100 Rapid feed - Rapid return: 3,850mm/min - 8,000mm/min Drilling spindle feed: 0-500mm/min Rapid spindle positioning: 15,000mm/min Automatic tool changer: 5 tools per drilling unit. 3x5 units = 15 total tools Total power: 45KW MARKING UNIT FEED SYSTEM: - 26 meters infeed with beam feeder + 6 side arms for parallel beam feed to roller conveyors - 30 meters with roller conveyors for outfeed + 6 side arms - 4 side arms for small parts - The majority of rollers are powered - The total length required for infeed to outfeed is approximately 60 linear meters. *Please request machine installation layout drawings.

Kondisi: baik (bekas), Vertical Turning Lathe SC33 CNC Produsen: TITAN (Rumania) Tahun Pembuatan: 1986 Revisi total mesin pada tahun 2005 Data teknis utama: CNC Siemens 802D Diameter meja putar: 3000 mm Diameter pembubutan maks: 3300 mm Tinggi kerja maks: 3000 mm Berat benda kerja maks: 18000 kg Rentang kecepatan meja: 1,02-92 RPM Rentang kecepatan pemakanan: 0,05-5 mm/putaran Daya motor utama: 55 kW Dimensi keseluruhan: 5600 x 5300 x 5400 mm Berat: 47350 kg Dedpfsw Eplasx Ahuocf Mesin dalam kondisi teraliri listrik.

Kondisi: baru, Tahun pembuatan: 2023, Pipe drilling machine, angled drilling machine, drilling automaton TDM100, manual, with one drilling head IMMEDIATELY AVAILABLE FROM STOCK + CAN BE INSPECTED UNDER POWER - Minimum quantity lubrication - manual material clamping - manual feed - max. pipe length 3,000mm (optionally 6,000mm) - positioning accuracy +/- 0.2mm Dcsdpfxjlgvkis Ahujf - 10 stops (can be expanded as required) - manual loading and removal of material - drilling head swivel range +/- 50° - manual 360 degree pipe rotation device - drilling unit power 1 x 2.2 kW - motor speed 295 - 2950 rpm - speed display on touch panel - drilling unit lighting - integrated tool cabinet - round tube up to 114mm - square tube up to 100 x 100mm - flat material up to 100 x 15mm - T-profile up to 100 x 100 x 12mm - L-profile up to 100 x 100 x 8mm - double-post up to 100 x 15mm - flow drilling up to M12 - drilling diameter up to Ø 50mm

Kondisi: bekas, Tahun pembuatan: 2004, Technical details: Maximum wheel diameter: 200 mm Wheel width: 60 mm Maximum module: 7 Machine weight approx.: 15 t Table diameter: 180 mm Dcsdpfxjxc E H So Ahuef Table speed range: 100 rpm Cutter speeds: 750 rpm Well-maintained gear hobbing machine without feeder/automation Available from: 24.08.2024

Tahun pembuatan: 2001, Kondisi: bekas,