Pengeboran dan penggilingan mesin

HBM BF 16

Kondisi: baru, Swing diameter over bed 410 mm Swing diameter over cross slide 240 mm Turning length 1000 mm Swing diameter in the gap 530 mm Spindle speed 65 - 1810 rpm Centre height 205 mm Spindle bore 52 mm Tailstock quill taper MK 4 Total power requirement 2.2 kW Machine weight approx. 0.9 t Space requirement approx. 1.9 x 0.8 x 1.3 m Lead and feed screw lathe with: 3-axis digital readout system, fully assembled Electromagnetic main spindle brake Automatic feed in longitudinal and face directions Safety relay Micrometer end stop Coolant system 3-jaw chuck with one set each of turning and boring jaws Dodpfx Aem Rlb Njbhokh German operating manual.

Kondisi: baru, ELMAG geared milling and drilling machine MFB 20 Vario MFB 20 / MFB 20-L / MFB 30 / MFB 30-L Vario The compact MFB 20 Vario and MFB 20-L Vario milling and drilling machines make precise machining of workpieces a pleasure, thanks to a swiveling machine head that ensures flexible operation in any position. The MFB 20 Vario has been specially designed for small milling and drilling tasks. With a drilling capacity in steel of 20 mm and a face milling capacity of 63 mm, it covers a wide range of standard sizes in model and machine construction. Digital displays for speed and drilling depth, as well as stepless speed adjustment, provide optimal support. Standard Features - Quick-action drill chuck B16, 1 - 16 mm - Taper arbor MK 2 / B16, internal thread M10 - Drawbar spindle M10 - Tool set - Operating manual / CE conformity ADVANTAGES Face milling - end milling - drilling Stepless speed adjustment Digital speed display Emergency-stop button Forward and reverse operation Speed controller Precision micro-feed Digital drilling depth display Quill lock Operating lever with lock Milling spindle with precision bearings Drawbar spindle for high safety Smooth, precise cross table with T-slots and coolant channel Milling spindle protection cover Drilling depth scale No-voltage release Machine stand available as option TECHNICAL DATA Drilling capacity in steel: 20 mm Thread cutting capacity: M14 Face milling capacity: 63 mm End milling capacity: 16 mm Spindle taper (rotating spindle): MK 2 Speed range 1: 50 - 1125 rpm Speed range 2: 100 - 2250 rpm Speed stages: stepless Quill travel: 50 mm T-slot width: 12 mm Milling head stroke: 375 mm Spindle reach: 184 mm Milling head swivel range: ± 90° Quill-to-table distance: 0 - 375 mm Milling table surface: 500 x 180 mm Table travel X x Y: 280 x 175 mm Motor power: 600 W Power supply: 230/50 V/Hz Dimensions (WxDxH): 500 x 180 x 375 mm Dkjdpfx Aot Ed Ersbhsh Length x Width: 745 x 570 mm Height: 935 mm Weight: 103 kg

Kondisi: baru, The Mark Super SV is a high-performance drilling and milling machine from the category of conventional milling machines, setting a new benchmark for productivity. This machine offers not only powerful drive and a wide speed range but also stands out for its versatility. Featuring a motorized adjustable milling head and the ability for precise positioning via a handwheel, the Mark Super SV is ideally suited for machining steel and non-ferrous metals in workshops and training departments. Its robust construction ensures longevity and high precision. The user-friendly control panel with digital depth display and infinitely variable feed on the X-axis increases efficiency and reduces error rates. The clear interface and coordinated functions enable optimal handling. Discover the capabilities of the Mark Super SV and boost your machining productivity. Request a quote for this conventional milling machine today! Dsdoqcuc Espfx Abhokh

Kondisi: baru, Distance between spindle and table: 470 mm Total power requirement: 2.2 kW Approx. weight: 1.2 t Dimensions (LxWxH): Length 2400 mm, Width/Depth 2160 mm, Height 2300 mm, Weight 1200 kg Spindle speed: 60–4200 rpm - Solid construction made from high-quality Meehanite cast iron - High concentricity accuracy thanks to tapered roller bearings; measured runout in the quill less than 0.01 mm - Infinitely variable speed control - Forward/reverse for thread cutting - X and Z axes with adjustable 55° dovetail guides - Y-axis with flat guideways - Drilling/milling head tiltable ±45° - Coolant system - Forward and reverse operation - Automatic quill feed, 3-step 0.04–0.15 mm/rev - Motorized feed in X, Y, and Z axes - Precision micro-feed - Milling spindle with precision bearing - Mechanical spindle brake - Drilling depth scale and stop - Cross table with T-slots and coolant channel - Central lubrication - Height-adjustable safety screen with microswitch for maximum operator protection against flying chips and parts - Large, heavy-duty cross table, precision-machined surface with T-slots MF 4-B: - Cross table load capacity 300 kg - Large travel distances: X / Y / Z axis: 740 mm / 330 mm / 320 mm Dimensions and Weights Length: 2400 mm Width/Depth: 2160 mm Height: 2300 mm Weight: 1200 kg Drilling/Milling Capacity Max. face mill size: 76 mm Max. shank-type end mill: 25 mm Drilling capacity in steel (S235JR): 24 mm Continuous drilling capacity in steel (S235JR): 20 mm Electrical Connection Total connected load: 3 kW Supply voltage: 400 V Phases: 3 Ph Power type: AC Mains frequency: 50 Hz Milling Table (Horizontal) Length: 254 mm Width: 1370 mm Vertical spindle to milling table max.: 405 mm T-slot size: 16 mm Number of T-slots: 3 T-slot spacing: 63 mm Max. load capacity: 300 kg Horizontal Spindle Overhang: 0–420 mm Dsdpsd H Hhzsfx Abhekh Coolant System Coolant pump drive power: 90 W Motors Vertical spindle power (standard operation): 2.2 kW Standards and Approvals Standard: DIN EN 55011 EMC class: C2 Travel X-axis manual: 820 mm Y-axis manual: 410 mm Z-axis manual: 400 mm X-axis automatic: 740 mm Y-axis automatic: 330 mm Z-axis automatic: 320 mm Vertical Spindle Overhang: 0–420 mm Spindle taper: ISO 40 DIN 2080 Speed range: 60–4200 rpm Number of speed ranges: 2 Speed control: mechanical, stepless Swivel range, milling head X–Y plane: 90° Swivel range, milling head Z–X plane: 45° Quill diameter: 86 mm Quill travel: 127 mm Quill feed: 0.04/0.08/0.15 mm/rev Milling head vertical travel (Z-axis): 470 mm PU: 1

Kondisi: bekas, Tahun pembuatan: 1990, Technical details: X-axis travel: 185 mm Y-axis travel: 95 mm Z-axis travel: 200 mm Control unit: EMCOtronic TM02 Spindle mount: SK 30 Speed range: 10 - 4000 rpm, stepless Feed rate, stepless: 1 - 2000 mm/min, stepless Rapid traverse: approx. 3.0 m/min Tool turret - number of stations: 10 Interface: RS 232 Table size: approx. 420 x 125 mm Total power requirement: 0.8 kW Machine dimensions (LxWxH): 2.1 x 0.9 x 2.0 m EMCOTRONIC TM 02 control panel Dsdpfevc Awrox Abhokh Operating modes: Manual and/or automatic operation Coolant system (coolant supply to the milling spindle) Operation via control panel mounted on 3 swiveling wheels Pneumatic door guard

Kondisi: baru, Drilling capacity in steel (diameter): 40 mm Throat depth: 275 mm Drilling stroke: 120 mm Spindle taper: MT 4 Speed range: 75 - 3200 rpm Table cross travel: 190 mm Table longitudinal travel: 490 mm Clamping surface of table: 730 x 210 mm Supply voltage: 400 V Feed rates: 0.1 - 0.18 - 0.26 mm/rev Total power requirement: 1.1/1.5 kW Dedpfx Aeupw T Debhekh Machine weight approx.: 0.35 t Required space approx.: 0.8 x 0.75 x 1.85 m Drill/milling machine equipped with: • Drilling capacity 40 mm • Milling capacity 32 mm • Tapping device • Cross table with adjustable guides • Quill feed • Change-gear transmission

Kondisi: baru, Bandsaw NEBES TM 275 – 400 V Three-phase NEW “CE” Induction motor Cast iron frame Adjustable cutting angle from 0° to 60° Entirely cast iron structure Electric pump for blade lubrication and cooling Oil-bath blade tension gauge Front-mounted controls and two cutting speeds Coolant pump exclusion switch Blade guide with hard metal (H.M.) pads Round cutting capacity 0°: 220 mm Square cutting capacity 0°: 200 x 200 mm Rectangular cutting capacity 0°: 230 x 185 mm Round cutting capacity 45°: 150 mm Square cutting capacity 45°: 150 x 150 mm Rectangular cutting capacity 45°: 150 x 200 mm Round cutting capacity 60°: 90 mm Square cutting capacity 60°: 90 x 90 mm Dkjdpfxeh Nm Ncs Abheh Rectangular cutting capacity 60°: 90 x 120 mm Power: 1.3 HP Voltage: 400 V Blade dimensions: 2450 x 27 x 0.90 mm Weight: 265 kg

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, diameter pembubutan: 290 mm, panjang pembubutan: 750 mm, panjang total: 1.400 mm, lebar total: 700 mm, tinggi total: 1.030 mm, kecepatan rotasi (maks.): 1.800 rpm, penjepit spindle: MK 3, The following features and specifications make the G2930 combination lathe unique and highly competitive on the market: 1. V-shaped guideways provide enhanced stability and are solidly anchored. 2. The gearbox is fixed for maximum stability and offers comprehensive feed and thread cutting functions. 3. State-of-the-art tapered roller bearings support the D1-4 spindle with utmost precision. 4. Automatic vertical feed enables maximum threading capability. 5. Cross-slide equipped with T-slots for enhanced versatility. 6. Guideways are effectively controlled via adjustable gibs. 7. Advanced gearbox design for maximum functionality. 8. Maximum working area due to recessed bed section. 9. Carriage-mounted spindle operated via lever arm. 10. Two feed rods integrated for optimal operation. 11. User-friendly forward/reverse interface with zero backlash. 12. Versatile tailstock, adjustable for taper turning operations. 13. Emergency stop, load switch, and process controls are installed for safety and control. TECHNICAL DATA Max. turning diameter over bed: 290 mm Max. turning diameter over cross slide: 165 mm Distance between centers: 750 mm Spindle taper: MT5 Spindle bore: 38 mm Max. tailstock quill travel: 80 mm Tailstock taper: MT3 Carriage travel (longitudinal): 560 mm Compound travel: 140 mm Tool post travel (cross): 80 mm Dkjdpfx Abjxb Up Tehsh Cross feed: 0.017~0.25 mm/rev, 15 steps Longitudinal feed: 0.07-1.0 mm/rev, 15 steps Metric threads: 0.2-3.5 mm, 18 steps Imperial threads: 8-56 TPI, 21 steps Spindle speed range/steps: 50~1800 RPM, infinitely variable Motor power: 1.5 kW Other dimensions and weights: Overall dimensions: 1400 x 700 x 1030 mm Packing dimensions: 1450 x 750 x 970 mm Net weight: 290 kg Gross weight: 310 kg

Kondisi: baru, Tahun pembuatan: 2025, The ZX7045 B1 DRO milling-drilling machine is an advanced tool designed for precise metalworking. It excels in drilling, reaming, and enlarging holes up to 45/40 mm in cast iron, as well as thread tapping for screws up to M12 mm. With a milling capacity of up to 80 mm (width) and keyway cutting up to 22 mm, this machine offers versatile applications. The ZX7045 B1 DRO version features an automatic spindle feed, increasing work efficiency. Additionally, it is equipped with a digital readout for enhanced precision and a coolant system to maintain optimal temperature during machining. This machine is ready for immediate use and available directly from stock. It is ideal for professionals who demand high quality and performance in metalworking. Product Features: - HEAVY-DUTY, STABLE CAST IRON CONSTRUCTION - AUTOMATIC SPINDLE FEED - MILLING HEAD HEIGHT ADJUSTED ON THE SUPPORT, NOT THE COLUMN Dedpfx Asud H H Uebhokh - ADDITIONAL LIQUID COOLING - MASSIVE CROSS TABLE WITH PRECISELY GROUND SURFACE - DOVETAIL GUIDES - QUIET OPERATION THANKS TO GROUND GEARS - LEFT AND RIGHT SPINDLE ROTATION - ROTARY HEAD +/- 90° - ADJUSTABLE HEAD HEIGHT - DIGITAL READOUT - Base available as an optional accessory TECHNICAL DATA: - DRILLING CAPACITY IN STEEL: 32 mm - DRILLING CAPACITY IN CAST IRON: 45 mm - FACE MILLING CUTTER DIAMETER: 80 mm - END MILL DIAMETER: 28 mm - SPINDLE SPEEDS: 50, 95, 100, 180, 190, 355, 360, 655, 710, 1260, 1310, 2520 rpm (6/12) - SPINDLE TAPER: MT 4 - SPINDLE STROKE (AUTOMATIC FEED): 125 mm - WORK TABLE DIMENSIONS: 820 mm x 240 mm - BASE DIMENSIONS: 580 x 600 mm - MAX. DISTANCE SPINDLE TO TABLE: 445 mm - DISTANCE SPINDLE TO COLUMN SURFACE: 260 mm - TRAVEL X/Y/Z: 515/175/430 mm - QUILL FEED RATE: 0.12; 0.18; 0.25 mm/rev - HEAD ROTATION LEFT/RIGHT: 90° - MOTOR POWER: 1.8 kW (2.5 HP) - POWER SUPPLY: 400 V - WEIGHT: 350 kg Available Accessories: - MK4/B18 drill chuck arbor - Digital readout - Service tools - Drill chuck 3–16 mm/B18 - Reducing sleeve MK4/MK3 - Reducing sleeve MK3/MK2 - Operating manual in English

Kondisi: baru, Centre distance ----- 1000 mm Centre height ----- 180 mm Swing over bed ----- 360 mm Spindle bore ----- 40 mm Bed width ----- 260 mm Spindle speed ----- 40-1800 rpm Motor ----- 2.4 kW Weight ----- 1000 kg INCLUDES * 3-axis digital readout, brand SINO * Quick-change tool post type Multifix TOOE5 with 4 tool holders * 3-jaw chuck 200 mm * 4-jaw chuck 200 mm Dedjga Ty Espfx Abhekh * Faceplate 250 mm * LED work lamp and cooling system * Fixed and travelling steady rest HEAVY-DUTY VERSION WITH CAST IRON BASE