Mesin penempaan

HEBÖ Schmiedemaschine

Kondisi: baru, Mesin Tekuk Horizontal Fastech FP 30 Deskripsi: • Tekanan: 30t • Langkah: 285mm • Tinggi alat maksimum: 250mm • Plat baja sisi tinggi: 200 x 18mm • Kecepatan kerja: 10,0mm/dtk • Kecepatan balik: 10,0mm/dtk • Tinggi kerja: 930mm • Meja: 660 x 1250mm • Kebutuhan daya total: 3,0kW • Motor: 400 Volt 50Hz • Berat: 850kg • Dimensi P-L-T: 1250 x 650 x 1250mm • Kapasitas oli: 40,0l Perlengkapan: Crodpfjfg Eu Usx Aarjk • Mesin tekuk horizontal hidrolik • Area kerja kokoh dari baja stabilisasi • Mesin dari baja tempa yang dikeraskan dan diasah • Tampilan digital untuk pengaturan langkah • 1x set perkakas • Sakelar kaki ganda

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: A2536805, Pressure: 40 t Stroke: 250 mm Retracting Force: 6.3 t Motor: 5.5 kW Max. Working Height: 450 mm Max. Approach Speed: 90 mm/sec Pressing Speed: 10 mm/sec Travel Distance (w): 250 mm Ram Plate: 500 x 200 mm Table Plate: 600 x 650 mm with T-slots Table Cut-out: 200 x 170 mm Table Height: 850 mm Oil Tank: 200 l The described machine can be custom-built for you. Production time is approximately 5 months from receipt of payment. Approach: The press moves to the zero point at up to 90 mm/second. The positioning accuracy is 0.5 mm or better. Return: The press moves back to the end point at up to 90 mm/second. The accuracy here is 0.5 mm or better. The dwell time is adjustable from 0 to 10 seconds (in increments of 0.1 seconds). The press force can be adjusted between 10 and 40 tons (in bar). Cedpfx Ajfxyhfoarork Further control details: The control system can be locked with a key switch. The key switch for the control system has the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stops at any desired position when the switches are released.) - Manual operation for bending tasks at up to 9.5 mm/sec using two-hand control and automatic return to top dead center when both two-hand buttons are released. - Automatic operation with secure tooling at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine may only be used with fully enclosed, secure tooling—this information is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via the two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A key selector switch is used to toggle between automatic and manual operation. Position adjustment for top and bottom dead center as well as switching position for speed reduction is managed via sensors that are adjustable on a chrome-plated rod. A clamping thread allows for fine sensor adjustment—accuracy is +/- 0.5 mm. The press can be equipped with a bending blade and, using the two-hand control, can perform sheet metal bending as well as punching, notching, and bending in automatic mode with secure tooling.

Kondisi: baru, Tahun pembuatan: 2025, Centre lathe swing over bed: 330 mm Swing over cross slide: 210 mm Crsdpfx Aaowp Tq Uersk Turning length: 1000 mm Centre height: 167 mm Spindle bore: 40 mm Drive power: 2.2 kW - New machine - with 3-axis ACU-RITE digital readout and MULTIFIX quick-change tool post size MA * For further information regarding the exact standard equipment and available options, please visit our website or contact us directly *

Kondisi: bekas, Glaser flat steel bender HAWE HC4L/3.0 hydraulic see pictures Crodju Da Afepfx Aarjk

Kondisi: bekas, Fungsionalitas: berfungsi sepenuhnya, tinggi total: 1.715 mm, lebar total: 735 mm, panjang total: 1.475 mm, daya: 3,3 kW (4,49 hp), berat keseluruhan: 3.300 kg, Palunya tempa dalam kondisi sangat baik dan dapat diuji dalam keadaan menyala kapan saja. Codpfsxwuv Eox Aarork Massa nominal bagian jatuh, kg: 75 Energi pukul, kJ: 1,4 Jumlah pukulan maksimum per menit: 210 Jarak kerja (daylight), mm: 300 Ukuran cetakan dies, mm: 130 x 63 Daya motor, kW: 3,3 Dimensi palu, mm: 1475 x 735 x 1715 Berat palu dengan landasan, kg: 3300

Kondisi: bekas, Kran mit Säulenbefestigung DEMAG Typ PK1 N-F Tragfähigkeit: 125 kg Ausladung: 3.500 mm Hakenhöhe: 2.200 mm Gesamthöhe der Säule: 3.150 mm Crjdpfx Asxpubxearjk Unterkante Ausleger: 2.700 mm Mit Elektro-Kettenzug Kettenabgang: Länge 2.100 mm Guter Zustand Spannung: 380 V Gewicht: ca. 250 kg

Kondisi: bekas, CINCINNATI PTC 20 Säulenbohrmaschine Spindelaufnahme: CM3 Spindelausladung: 150 mm Spindeldrehzahl: 100–3800 U/min Drehtisch Tischgröße: 430 x 430 mm Ausladung: 280 mm Spindelmotor: 1,5 kW Bohren/Gewindeschneiden-Funktion Spannung: 380 V Breite: 600 mm Tiefe: 1100 mm Gesamthöhe: 1900 mm Cjdpfx Aowt N I Dearsrk Gewicht: ca. 400 kg

Kondisi: bekas, Ring-shaped horn, forged horn, ring horn, cone, forging tool, pylon sheet metal processing - Handover: in as-is condition as inspected - Damages: see photos Cedpfxji Dbz Ds Aarsrk - Pylon: steel cone for sheet metal processing - Height: 1165 mm - Dimensions: see drawing in the photos - Overall dimensions: Ø 368 x 1165 mm - Weight: approx. 70 kg