Dymatrix 106 CSB

Heidelberg Dymatrix

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, Fungsionalitas: berfungsi sepenuhnya, gaya punching: 330 t, Die Maschine ist zum Stanzen, Prägen, Ausbrechen von Abfall und Nutzentrennen konzipiert – verkauft im Ist-Zustand (as is). Das System verfügt über einen Hochleistungs-Bogenanleger, der für einen vollautomatischen NON-STOP-Betrieb ausgelegt ist: • Für vollautomatisches Stanzen, Rillen und Prägen mit oder ohne Greiferrand • Zum Ausbrechen von Innenabfall sowie seitlichen und hinteren Bogenrändern • Für die stapelförmige Ablage gestanzter und ausgebrochener Bogen mit vorhandenen Greiferrändern oder • Für das Abtrennen der Greiferränder mit anschließender stapelförmiger Restbogenablage • Patentiertes Greiferwagen-Registersystem garantiert höchste Passergenauigkeit • Paketstapelmaschine ermöglicht vollautomatische Trennbogenzuführung sowie NON-STOP-Ablage, ohne Umrüstung selbst bei kleinformatigen Zuschnitten (Wechseltisch mit Kammstruktur) • Trennbogenmagazin mit elektrischer Vorratsüberwachung, während des Betriebs nachfüllbar • Centerline-Ausrüstung • Automatische Palettenwechselvorrichtung im Ablagebereich Spezifikationen: - Max. Bogenformat: 760 x 1060 mm - Min. Bogenformat: 350 x 400 mm - Maximale Stanzkraft: 3,3 MN (330 t) - Geschwindigkeit: 9.000 Bogen/h Verarbeitbare Materialien: - Papier ab 80 g/m² - Karton bis 2000 g/m² - Wellpappe bis 3 mm (max. Bogenkrümmung 4 %) Ausstattung: - Optische Bogenanlage (Dyset) - Automatischer Non-Stop Anleger - Ausbrechstation - Nutzentrennstation - Centerline Hjdpfx Aeww E Nrohvjh - Vollautomatische Palettenwechseleinrichtung Ablage - Inklusive Podest - Schnellspannrahmen in allen Werkzeugstationen

Kondisi: bekas, Tahun pembuatan: 1988, Bobst Flexo 1604 printing press, four-color, bottom printing, anilox rollers 120l/cm and 80l/cm Bobst Transfer BOBST SPO 1600 flatbed die-cutter, max format 1100 mm x 1600 mm / 43.3" x 63" with four printing units plus bottom MPA, sheet feeder with conventional roller transport Hjdpfxjv Ifpue Ahveh - Anilox rollers 120l and 80 lines - Open steel doctor blade chamber - Vacuum feeder - Die-cutting section - Waste stripping section - Centerline II - High-pile delivery with two elevating tables - Max sheet size: 1100 mm x 1600 mm / 43.3" x 63" - Min sheet size: 520 mm x 600 mm / 20.5" x 23.6" - Cutting force: 400 t - Materials: E, B, C, CB, BE flute - Maximum speed: 6,000 sheets/hour Possibility to sell the machines separately.

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2009, Fungsionalitas: berfungsi sepenuhnya, berat keseluruhan: 52.000 kg, gaya punching: 600 t, kebutuhan tinggi: 3.520 mm, persyaratan ruang panjang: 12.150 mm, lebar yang dibutuhkan: 9.340 mm, Machine for Die Cutting, Embossing, Waste Stripping, and Blank Separation Used machine, overhauled at QTM Schwalmtal Hjdpfx Aet E Nthohvsh System equipped with high-performance sheet feeder designed for NON-STOP operation ⦁ For fully automatic die cutting, creasing, and embossing with or without gripper edge ⦁ For removal of internal waste as well as side and rear sheet edges ⦁ For stacking of die-cut and stripped sheets with attached gripper edges ⦁ For separating gripper edges and subsequent stacking of remaining sheets ⦁ With patented gripper carriage registration system for maximum register accuracy ⦁ With package stacker enabling fully automatic separator sheet feeding and NON-STOP stacking, without the need for adjustment even for the smallest blanks (exchange table with comb structure) ⦁ Separator sheet magazine with electronic stock monitoring, refillable during production ⦁ With Centerline equipment ⦁ With automatic pallet changing device at delivery ⦁ Modem ⦁ Standard machine height increase by 600 mm Specification Maximum sheet size: 1060 x 1450 mm Minimum sheet size: 500 x 700 mm Maximum die cutting force: 6.0 MN (600t) Speed: 8,000 sheets/h Processable materials: Paper min. 80 g/m² Cardboard up to 2000 g/m² Corrugated board up to 5 mm (max. sheet warp 4%) Equipment: Patented QTM rail system Manual non-stop feeder Stripping station Blank separation station Centerline Fully automatic pallet changer at delivery Including platform Control upgrade to Siemens S7 Completely overhauled machine drive Quick-lock frames in all tooling stations

Kondisi: bekas, Tahun pembuatan: 2004, Fungsionalitas: berfungsi sepenuhnya, Heidelberg Dymatrix 113 CSB Pro – FULLY REFURBISHED Machine Type: Embossing and Die-Cutting System / Automatic Sheet Die-Cutter Machine Number: 400018 Year of Manufacture: 2004 Machine Specifications Max. Cycles per Hour: 9,000 sheets/hour Length without Feeder: approx. 5,190 mm Length with Feeder: approx. 7,770 mm Max. Width: approx. 2,400 mm Max. Height: approx. 3,200 mm Max. Height with Opened Window: approx. 3,930 mm Weight without Feeder: approx. 30,400 kg Feeder W4 Weight: approx. 3,000 kg Internal Chase Size: 820 x 1,134 mm Max. Die Format Size: 816 x 1,130 mm Max. Cutting Area: 800 x 1,120 mm with gripper margin Adjustable gripper margin: - Standard: 11–17 mm with 13 mm wood before 1st knife - Option: 8–14 mm with 10 mm wood before 1st knife Cutting Rule Height: 23.8 mm Max. Feeder Pile Height incl. Pallet: 2,000 mm Max. Delivery Pile Height incl. Pallet: 1,700 mm Max. Feeder Pile Weight: 1,000 kg Max. Delivery Pile Weight: 1,000 kg Max. Feeder Make-Ready Stack Height: 450 mm Max. Feeder Make-Ready Stack Weight: 450 kg Max. Delivery Auxiliary Stack Height: 200 mm Max. Delivery Auxiliary Stack Weight: 200 kg Hsdjv T T N Hspfx Ahvsh Pallet Sizes Feeder: max. 800 x 1,200 mm (EURO Pallet) Delivery: max. 800 x 1,200 mm (EURO Pallet) Max. Pallet Height: 170 mm Drive and Power Supply The machine is powered by a frequency-controlled motor via a flywheel. Between the flywheel and the machine, with a spring-loaded brake, is a pneumatic clutch for engaging and disengaging the machine. The motor runs continuously. The control cabinet at the machine contains—except for a few exceptions—all control devices for the die-cutter and feeder. Command and indicator devices are located on the machine and are distributed across the control panels as needed. Control Cabinet Equipment: Power input, main switch, fuses, motor protection device, PLC control Power supply: 3-phase 400 V, 50 Hz, 63 A Control voltage: 24 V DC; 230 V; 50 Hz Dimensions: 2,800 x 600 x 2,200 mm The machine is in excellent condition. A test run is possible at any time. Various accessories are available. Patented QTM chain guide rails have already been retrofitted. Price: Negotiable

Kondisi: baik (bekas), Tahun pembuatan: 1987, Fungsionalitas: berfungsi sepenuhnya, Bobst SP 142 ER Year 1987 Max. sheet size: 1020x1420 mm Hsdpevhcgqofx Ahvsh Min. sheet size: 700x520 mm Max. speed: 6,000 sheets/hour Max. cutting force: 600 t Centerline system Micrometric adjustment Currently in production

Tahun pembuatan: 2007, Kondisi: baik (bekas), en_US__• Model: BOBST Autoplatine® SPanthera 106 LER • Machine Type: Automatic flatbed die-cutting machine with stripping and blanking • Manufacturer: BOBST • Category: High-performance die-cutter for folding carton & packaging • Year of Manufacture: 2007 • Production Status: Machine under power _____ Format & Substrate Capabilities • Max. Sheet Size: 760 × 1,060 mm • Min. Sheet Size: approx. 350 × 400 mm • Max. Cutting Size: 745 × 1,055 mm • Gripper Margin: approx. 8–10 mm • Paperboard Thickness: 0.1 – 2,000 g/m² (paper to heavy board) • Corrugated Board: up to N-flute / F-flute (depending on tooling) • Max. Cutting Pressure: up to 260 t (BOBST Autoplatine standard) _____ Production & Performance • Maximum Mechanical Speed: up to 9,000 sheets/hour • Automatic register system: Included • Blanking Capability: Yes (LER = Logistics, Extraction, Removal = full blanking section) • Stripping Section: Fully automatic 3-frame stripping Hedpfxjxzr Hpo Ahvsh • Non-Stop Functionality: o Non-stop feeder (continuous pile logistics) o Non-stop delivery (automatic pile change)

Kondisi: baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, BRAUSSE 1450 SE Baujahr: 2008 Max. Format: 1.055 x 1.450 mm Max. Stanzkraft: 400 t Max. Geschwindigkeit: 5.500 Hübe/Stunde Quicklock-System Centerline in Produktion Hedpfx Ahet D Ncajvoh

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, lebar total: 6.400 mm, panjang total: 7.800 mm, tinggi total: 2.500 mm, berat keseluruhan: 30.000 kg, Brand new machine Machine for die-cutting, embossing, waste stripping and blank separation Hedpfxjt H Nhhj Ahvoh Specification: Max. sheet size: 830 x 1,150 mm Min. sheet size: 450 x 550 mm Maximum die-cutting force: 3.0 MN (300 t) Speed: 7,000 sheets/h Processable materials: Paper: min. 80 g/m² Cardboard: up to 2,000 g/m² Corrugated board: up to 4 mm Equipment: Manual non-stop feeder Automatic stack alignment at feeder 10" display at feeder Automatic non-stop roll-up delivery Stripping station Blank separation station Centerline Automatic separator sheet inserter for stack stabilization Quick-clamping frame for top stripping tool and central stripping board Quick-clamping frame for blank separation station upper and lower tool Pneumatic locking frames and die-cutting plate locking APC 1 – automatic die-cutting pressure system APC 2 – platen tilting at platen exit 1x 4 mm die-cutting plate incl. 10x 1 mm make-ready plates 2x 5 mm die-cutting plates 1x Quicklock locking frame 2x locking frames without Quicklock QTM fine adjustment for make-ready plate Sheet monitoring in each station with 2 sensors Incl. platform 1 tool set (Bobst system) Delivery time: 6-8 months

Kondisi: baik (bekas), Tahun pembuatan: 2014, Nur ca. 150 Mio. Impressionen Ausstattung CX-Paket Logistik – mit manuellem Non-Stop-Anleger FAPC (vollautomatischer Plattenwechsel) Preset Ergotronic Steuerpult WallScreen Display Colortronic Farbwerkdosiereinrichtung Varidamp Registerregelung lateral, zirkumferentiell, diagonal Technotrans Beta c 220L (luftgekühlt) Farbtemperaturregelung CleanTronic Synchro – Walzen-/Gummituch-/Druckzylinder-Wascheinrichtung DriveTronic Anleger SIS (Sensoric Infeed System) Hodpfxex Sdn Ae Ahveh Non-Stop Anleger – manuell, nicht vollautomatisch Non-Stop Auslage – Rollo Maschine auf Sockel erhöht (420mm) Farbrührwerke (UV) EES CleanTronic Simultaneous Blanket- & Druckzylinderwäsche CleanTronic UV – separater Platz für UV-Wäsche im Schrank UV-Zwischentrockner – 6x UV-Kassetten, an jeder Position installierbar UV-Zwischentrockner – Positionen an allen 6 Druckwerken, an den Trockentürmen und 3 Positionen in der Auslage Lackwerk 1: Harris & Bruno Dispersions- und UV-Lackierpumpen mit Vorlagetanks (beheizt) Trockenturm 1: VariDry IR-/Heißlufttrockner (plus Interdeck-Position) Trockenturm 2: VariDry IR-/Heißlufttrockner (plus Interdeck-Position) Lackturm 2: Harris & Bruno Dispersions- und UV-Lackierpumpen mit Vorlagetanks (beheizt) Drivetronic SFC Simultaneous Form Change (bei Lackwerken) KBA VariDry IR/Heißluft/UV – Am Pressenausgang ALV3 verlängerte Auslage

Kondisi: baik (bekas), Tahun pembuatan: 2000, jam operasional: 23.000 h, Bobst SP 142 CER II Hedpfjxxypysx Ahvsh