Pusat permesinan universal 5 sumbu

HELLER HF 3500

Kondisi: bekas, Tahun pembuatan: 2017, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 710 mm, jarak lintasan sumbu Y: 750 mm, jarak gerak sumbu Z: 710 mm, torsi: 201 Nm, produsen pengendali: Siemens, model controller: 840D SL, lebar meja: 500 mm, panjang meja: 400 mm, kecepatan rotasi (maks.): 12.000 rpm, kecepatan spindel (maks.): 12.000 rpm, pasokan pendingin: 50 batang, daya motor spindle: 46.000 W, jumlah spindel: 1, jumlah slot dalam magazin alat: 50, diameter pemasangan: 100 mm, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, Baujahr_2019 Dsdpfx Alsyk D U Seyekr

Kondisi: bekas, Tahun pembuatan: 1994, Cutting diameter: 520 mm Bandsaw blade length: 7239 mm Cutting width: 1.3 mm Control: POSIMOD Dksdpfxswm Rm Ie Alyer Square cutting capacity: 520 x 520 mm Feed length: 500 mm Multiple feed length: 4500 mm Minimum cut-off length: 6 mm Residual workpiece length min./max.: 10 / 100 mm Cutting speed: 20 - 130 m/min Bandsaw blade dimensions: 7239 x 50 x 1.3 mm Saw motor: 5.5 kW Total connected load: 10.0 kW Machine weight approx.: 3.8 t Machine dimensions (L x W x H): 3.42 x 2.30 x 2.40 m - 2-column guided - Accessories: Infeed roller conveyor, 2500 mm long, chip conveyor, coolant system

Kondisi: baik (bekas), Tahun pembuatan: 2005, Machine as per photos Condition: Very good, apart from a defective slot in the tool magazine. Dedpfxevf D Anj Alyekr Tool holders included.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, jam operasional: 40.255 h, Fungsionalitas: berfungsi sepenuhnya, For sale is a DMG DECKEL MAHO DMF 220 linear, a 5-axis universal machining center in traveling column design. The machine was built in 2008 and underwent a full retrofit in 2022 with modernization to Siemens Sinumerik 840D Solution Line. Equipped with a 5-axis simultaneous operation license, Siemens Sinamics drive technology, Siemens OP15 Black Operator Panel, MCP control panel, and electronic handwheel. Technical Data: Manufacturer: DMG DECKEL MAHO Model: DMF 220 linear Dkodpfx Alsyuzg Hjyjr Machine type: 5-axis universal machining center / traveling column machining center Year of manufacture: 2008 Control: Siemens Sinumerik 840D Solution Line Modernization / Full retrofit: Siemens CNC / Drive upgrade 2022 5-axis simultaneous operation: License available Serial number: 15115223244 Machine number: 2499093 Travel X: 2,200 mm Travel Y: 560 mm Travel Z: 720 mm Tool holder: SK 40 Table load capacity: 2,500 kg Main spindle speed range: 20 – 14,000 rpm Connected load: 80 kVA Max. rated current: 115 A Protection: 125 A Mains voltage: 400 V Frequency: 50 Hz Control voltage AC: 230 V Control voltage DC: 24 V On hours: approx. 40,255 h Spindle / operating hours: approx. 13,082 h CNC / Drive technology: X-axis: Siemens Sinamics 160 A, 2 x SMC20 encoder module Y-axis: Siemens Sinamics 50 A, 2 x SMC20 encoder module Z-axis: Siemens Sinamics 80 A, 2 x SMC20 encoder module B-axis: Siemens Sinamics 25 A, 2 x SMC20 encoder module A-axis: Siemens Sinamics 25 A, 2 x SMC20 encoder module Spindle axis: Siemens Sinamics 26 kW, 2 x SMC20 encoder module Control panel: Siemens OP15 Black Operator Panel MCP keypad: Siemens Electronic handwheel: Siemens Magazine technology: Magazine A: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine B: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Magazine C: 400 W servo drive, 400 W servo motor, 10 m power cable, 10 m encoder cable Software / Licenses: 5-axis simultaneous operation license Axis licenses Operator software license Equipment: Integrated swivel table / swivel bridge design Paper band filtration unit Coolant / filter unit Control cabinet Full enclosure Work area lighting Siemens operator panel Condition: Machine in well-maintained condition Upgraded Siemens control and drive technology 5-axis simultaneous operation available

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, kecepatan spindel (min.): 16.000 rpm, daya motor spindle: 5 W, jumlah spindel: 3, jumlah slot dalam magazin alat: 21, tegangan masuk: 380 V, 4 unit CNC Brother mod. S500X1/S700X1. Tahun pembuatan 2014 Dksdpsyap R Defx Alysr 1 unit dengan 3 sumbu 1 unit dengan 4 sumbu, dengan stasiun hidraulik, tanpa instalasi penyaringan uap 1 unit dengan 4 sumbu, dengan stasiun hidraulik, dengan instalasi penyaringan uap

Kondisi: baik (bekas), Tahun pembuatan: 2008, 10564 Dodpfx Aloxvw Izjyjkr

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 800 mm, jarak lintasan sumbu Y: 450 mm, jarak gerak sumbu Z: 510 mm, gerak cepat sumbu X: 40 m/menit, pergeseran cepat sumbu Y: 40 m/menit, pergerakan cepat sumbu Z: 40 m/menit, produsen pengendali: HEIDENHAIN, model controller: HEIDENHAIN TNC-620, tinggi total: 2.500 mm, panjang total: 3.600 mm, lebar total: 2.500 mm, lebar meja: 1.000 mm, panjang meja: 450 mm, beban meja: 600 kg, berat keseluruhan: 5.000 kg, kecepatan spindel (min.): 80 rpm, kecepatan spindel (maks.): 12.000 rpm, pasokan pendingin: 20 batang, hidung spindel: ISO 40, jumlah spindel: 1, jumlah slot dalam magazin alat: 30, panjang alat: 300 mm, diameter alat: 80 mm, berat alat: 8 g, tegangan masuk: 380 V, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, USATO vertical machining center "DOOSAN DNM 4500" with Heidenhain TNC-620 CNC control Dkodpew D Dy Nefx Alyjr

Kondisi: bekas, Tahun pembuatan: 1998, Panjang putar 322 mm Maks. swing di atas bed 510 mm Maks. diameter putar 279 mm Kecepatan spindle 60-6000 rpm Lubang spindle 53 mm Dksdsx N A N Hjpfx Alyer Revolver dengan 12 posisi Kontrol: Fanuc 21 T Dilengkapi dengan: Barfeeder Hatec Rapid Load 12 Tailstock Berbagai pemegang alat & collet Chuck tengah

Kondisi: sangat baik (bekas), Tahun pembuatan: 1998, Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 570 mm, lubang spindel: 62 mm, panjang pembubutan: 1.250 mm, diameter pembubutan di atas alas geser: 365 mm, tinggi pusat: 280 mm, berat keseluruhan: 4.000 kg, OFFER We can offer you, subject to prior sale and errors excepted, ex stock and without obligation: VDF - BOEHRINGER Cycle-Controlled Universal Lathe Type: DUS 560 Year of Manufacture: 1998 / completely overhauled in 2008 Dkodpfx Asyqw Eqslysr Centre height: 280 mm Max. swing diameter over bed: 570 mm Max. swing diameter over cross slide: 365 mm Cross slide/traverse slide travel: 345/125 mm Distance between centres / max. turning length: 1,250 mm Spindle bore: 62 mm Spindle speeds, 2-step, infinitely variable: 3-500/15 – 2,500 rpm Longitudinal and cross feeds, infinitely variable: 0.01-50 mm/rev Rapid traverse longitudinal/cross: 5 and 10 m/min Max. feed force, cross/longitudinal: 6.5 / 12.5 kN Max. workpiece weight between centres/with tailstock: 400/1,000 kg Thread pitches: 0.1 – 400 mm/pitch Spindle drive: 15/21 kW Total power: 25 kW - 400 V - 50 Hz Weight approx.: 4,000 kg Accessories / Special Equipment: • SIEMENS 2-axis cycle control, Type 805, with direct input of all turning parameters using interactive user interfaces and suitable software, control and monitor integrated in the sliding door, with extended memory and free-form contour programming, graphics, etc. • 2 electronic hand wheels for fine adjustment of slide movement in Z and X axes and new joystick for rapid traverse in +Z/-Z and +X/-X, joystick for the main spindle with stepless speed control, forward and reverse • Fitted 3-jaw chuck SCA model, Ø 300 mm, faceplate approx. Ø 500, 4-jaw chuck 315 mm Ø, driving plate approx. 250 mm, simple faceplate 500 mm, various jaws • Mounted MULTIFIX toolpost Type CD with 5 different Multifix holders • Separate tool holder block for mounting CAPTO toolholder with internal coolant supply, various holders, some with collets • Tailstock with air bearing for easy movement, work lamp • Mobile chip trolley with coolant pump and oil skimmer, 2 rear sliding doors • Separate control cabinet, adjustable spindle end stop, work lamp, etc. Condition: very good – guides in excellent condition, ready for demonstration under power Please click here for a video of the machine: Delivery: ex stock – as inspected Payment: strictly net before delivery We look forward to your order. Numerous other lathes in all sizes available in stock – please contact us for further offers.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, rentang pengukuran sumbu X: 700 mm, rentang pengukuran sumbu Y: 1.000 mm, rentang pengukuran sumbu Z: 600 mm, MCOSMOS dengan modul GEOPAK (evaluasi berbasis CAD). Perangkat lunak - MCOSMOS 3 CNC V4. Perlengkapan: Kepala pengukur PH10MQ (termasuk adaptor quick-change FCR25). Sistem pengukuran pemindaian SP25M dengan set modul probe 5 bagian. MCOSMOS 3 CNC V4 termasuk dongle (Wibu-Box). CAT1000PS V4 (perbandingan dan evaluasi CAD). Upgrade perangkat lunak MCOSMOS-1 dari V2 ke V4. Modul tambahan GEO-EDM untuk komponen erosi. Part-program Generator dan Asisten GEO-EDM. Dkedpfx Asx H Nn Relyor