HELLER MC 20

HELLER MC 20

en: This 4-axis HELLER MC 20 was manufactured in 2019. It is equipped with a Siemens 840D sl control system, providing X, Y, and Z travel of 800 mm, 750 mm, and 800 mm, respectively. The spindle offers a speed range of 5–16,000 rpm with a drive power of 34 kW. The machine features a tool magazine with 44 positions and a rotary table diameter of 520 mm. Consider the opportunity to purchase this HELLER MC 20 horizontal machining center. Contact us for further information.

• Work Area:
• Feed forces (X/Y/Z): 10,000 N
• Speeds and Dynamics:
• Rapid traverse X/Y/Z: 60,000 mm/min
• Acceleration: X = 7 m/s², Y = 8 m/s², Z = 6 m/s²
• Spindle / Machining Unit (HSK-A63):
• Tool interface: HSK-A63
Podjyf Nntopfx Abuopl
• Spindle diameter at front bearing: 70 mm
• Tool Management:
• Tool magazine type: HSK-A63
• Number of tool stations: 44
• Max. tool weight (all positions filled): 6 kg
• Maximum tool length: 550 mm
• Maximum tool diameter:
• With all pockets occupied: 120 / 80 / 80 mm
• With adjacent pockets free: 150 mm
• Minimum chip-to-chip time (VDI): approx. 3.3–4.4 s
• Rotary Axis:
• A-axis with rotary table diameter: 520 mm
• Interference circle diameter (A-axis): 1260 mm
• A-axis speed: 17 rpm
• Indexing resolution: 360,000 × 0.001°
• Dividing accuracy (VDI/DGQ 3441): 12 arcseconds
• Measuring System: Direct, absolute linear scales
• Utilities:
• Power supply: 400 V / 50 Hz
• Total connected load: approx. 27–30 kVA
• Compressed air supply: 4.5–6 bar
• Condition and Documentation:
• Machine is in very good technical condition
• Complete service documentation available

Additional Equipment

• Special loading and unloading system

Iklan ini diterjemahkan secara otomatis. Kesalahan terjemahan mungkin terjadi.