Pelurus dekoiler

HENSEL BRMS 4/500/10 / BSH 3-500

Kondisi: bekas, Tahun pembuatan: 2021, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: TET351P5-offAD-Bypass - 2200373733, kapasitas pendinginan: 66 kW (89,73 hp), jenis arus masuk: tiga fasa, jenis pendinginan: air, berat keseluruhan: 1.082 kg, suhu lingkungan (maks.): 46 °C, suhu lingkungan (min.): -5 °C, tegangan masuk: 400 V, tekanan: 6 batang, suhu: 7 °C, laju aliran volumetrik: 11,2 m³/jam, tekanan pompa: 4,68 batang, lebar total: 866 mm, panjang total: 2.250 mm, tinggi total: 2.054 mm, masa garansi: 3 bulan, frekuensi input: 50 Hz, Perlengkapan: Pelat tipe tersedia, Air-cooled process chiller / chiller unit Model: TAEevo Tech 351 P5-offAD-Bypass Manufacturer: MTA S.p.A. Chiller, cold water unit; cooler The TAEevo Tech 351 P5-offAD-Bypass is a compact, air-cooled water chiller suitable for outdoor installation down to -5°C. Includes crankcase heater, electronic expansion valves, phase monitoring, 350-liter buffer tank, and integrated P5 high-pressure pump. Special equipment: - Open filling system / tank mounted - Manual valve bypass between water inlet and outlet Chilled water outlet temperatures adjustable from -10°C to +30°C. Cooling capacity: 66 kW Chilled water temp. outlet/inlet (°C): 7 / 12 Flow rate (m³/h): 11.2 Available pump pressure (bar): 4.68 Ambient temperature (°C): 32 Refrigerant: R 410A Electrical data: Voltage (V): 400, Frequency (Hz): 50, Phases: 3 Max. power consumption (kW): 39 Max. current (A): 68 Starting current (A): 213 Protection class: IP54 Dimensions: Length (mm): 2250, Width (mm): 866, Height (mm): 2054 Weight (kg): 1082 Ksdpfswlt Raox Ag Reww Connection: Rp 2" Serial no.: 2200373733 Year of construction: 2021 Condition: Visual 2, Technically OK Used (Technical modifications and prior sale reserved!) Location: MTA Deutschland GmbH, 88131 Lindau Used machines may have cosmetic defects due to usage. (Technical modifications and prior sale reserved!)

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, This degreasing system operates under vacuum (pressure swing process) using either modified alcohols or hydrocarbons. (New machine) 12-month warranty Kwjdsqy H H Dspfx Ag Rjw Immediately available from St. Gallen Featuring vacuum-pressure swing technology System process: Spray, immersion, ultrasonic, and vapor degreasing, including vacuum drying. Specifications: Ultrasonic: 2 x 1000 W – 25 kHz Dual fine filter Chamber door made of armored glass 2-tank system, filling volume 400 L Double distillation, residual distillation Automatic oil discharge 3-stage water separation Electropolished chamber for ultra-fine cleaning Screw vacuum pump (latest generation) Loading trolley 2 washing baskets, mesh widths 7 mm and 12 mm 12" touch panel Prepared for automatic loading Max. basket size (480 x 320 x 200 h mm) Max. loading weight: 100 kg Machine dimensions: 2400 x 2400 x 3300 h mm Machine weight (basic version): 2500 kg Colour scheme: RAL 9003 (white) RAL 7021 (black)

Kondisi: baik (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2012, nomor mesin/kendaraan: 778 F 319, de-01 Kwsdpfjmx Rrljx Ag Rew

Kondisi: baik (bekas), Maschine Typ Hakenstrahlanlage 250 kg TOSCA TS-250 Typ: Hakenstrahlanlage Max. Werkstückdurchmesser: 1000 mm Max. Werkstückhöhe: 1500 mm Max. Werkstückgewicht: 500 kg Maschinenöffnungsbreite: mm Kedpfx Aovpgq Neg Roww Anzahl Turbinen: 2 Turbinen-Typ: 360 Turbinenraddurchmesser: 360 mm Turbinenleistung: 7,5 kW Max. Turbinenförderleistung: 105 kg/min Fördergleistyp: Y Reinigertyp: Luftabscheider Fundament: nicht erforderlich Gehäuseschutz: Mangan + Gummi Erforderlicher Luftdurchsatz: 3.000 m³/h Max. installierte Anschlussleistung: ca. 19 kW Gesamtgewicht der Maschine: 0 kg Gesamtbreite der Maschine: mm Gesamthöhe der Maschine: mm Gesamtlänge der Maschine: mm Die Maschine befindet sich in einer vollständigen Generalüberholung. Sämtliche beschädigten Komponenten werden durch Neuteile ersetzt, Turbinen werden komplett überholt, neue Lackierung RAL 7037/2000. Die Maschine wird in einem Zustand ausgeliefert, der einem Neugerät entspricht. !!! ZUSTAND WIE NEU !!!

Kondisi: diremajakan ulang (bekas), Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, jenis arus masuk: AC (pendingin udara), tegangan masuk: 400 V, lebar kerja: 1.100 mm, berat keseluruhan: 1.300 kg, lebar benda kerja (maks.): 600 mm, sambungan udara terkompresi: 6 batang, ketebalan lembaran (maks.): 40 mm, jumlah pemilik sebelumnya: 1, jenis penyesuaian ketinggian: listrik, panjang meja: 3.000 mm, tinggi meja: 850 mm, lebar meja: 600 mm, masa garansi: 3 bulan, Translation into English: Operating mode: dry Application description: Deburring of steel and stainless steel components Year of manufacture: 2007 Standards: CE, EC Machinery Directive 98/37/EC, VDE Units: mm, bar Operating manual: 1x manual Paint finish: RAL 9002 white (textured), outfeed table RAL 5010 gentian blue Planetary head station with 3 units: Planetary head version with 6 tools each, drive 1.3 kW per unit; speed frequency-controlled 100–300 rpm, disc station with electric height adjustment. Technical data: Working width: 1100 mm Table height adjustment: 0.55 kW Planetary head adjustment drive: 0.18 kW Feed drive: 1.3 kW (Lenze Motec) Conveyor belt dimensions: 1100 x 3000 mm (high-wear resistant version) Workpiece thickness: 0.8 – 40 mm Kwjdpfxjw U A Dme Ag Rjw Constant working height: 850 mm Compressed air connection: 6–7 bar Operating voltage: 3x400 Volt/N/PE/50 Hz Control voltage: 24 Volt DC Stepless feed 0.5–5 m/min, frequency-controlled, automatic workpiece thickness adjustment with starting switch (Joucomatic), 400 mm outfeed table with integrated brush for conveyor belt, drive 0.25 kW, DC brake Height adjustment gearbox, vacuum blower, unit lock, belts replaced – Machine is fully operational and in very good technical condition. Set according to manufacturer's specifications/standards. Delivery includes a mechanical functional warranty of 3 months from delivery date.

Tahun pembuatan: 2002, Kondisi: bekas, Press force 63 t Throat depth 315 mm Stroke 8–100 mm Strokes per minute 140 spm Ram adjustment 63 mm Table size 1200 x 630 mm Ram surface 800 x 315 mm Passage opening in table Ø 110 mm Table height 820 mm Ram bore Ø 50 mm Shut height 335 mm Total power requirement 7.5 kW Machine weight approx. 5 t Kodpfslp U D Tex Ag Rsww Pneumatic clutch/brake combination Central oil lubrication Hydraulic overload protection Manual stroke adjustment Manual ram adjustment Two-hand control Foot control Roller block rails in table Hydraulic clamp on ram Compensating cylinder Approved for manual loading operations

Kondisi: bekas, Tahun pembuatan: 2007, nomor mesin/kendaraan: 001669, Lg 33121 Single-Sided Decoiler ARKU AH 3000/ST-M Year of manufacture: 1995 Maximum strip width: 600 mm Maximum load capacity: 3,000 kg Maximum coil outside diameter: 1,800 mm Expansion: hydraulic Hold-down arm: hydraulic Pay-off reel with auxiliary drive and brake Fixed coil loading stand + decoiler traversing device Includes: Lg 33221 High-Performance Strip Straightening Machine LORENZ BRM 50/620.9 Year of manufacture: 2007 Machine no.: 001669 Maximum pass-through width: 620 mm Number of straightening rollers: 9 Straightening roller diameter: 50 mm Material thickness: 0.7 to 6.0 mm Straightening rollers are multi-supported to prevent deflection All rollers driven via distribution gearbox and cardan shafts Used, as-is, ex-stock, immediately available. Overhaul possible upon request. Delivery time by arrangement. Kwsdpfohigmbsx Ag Rjw Further data will follow shortly or upon request.

Kondisi: baru, Cutting capacity at 90°: round 510 mm Cutting capacity at 90°: square 450 mm Cutting capacity at 90°: rectangular 650 x 450 mm Band speed: 15 - 100 m/min Kwsdpfx Ajd Iipmeg Row Table height: 844 mm Saw blade dimensions: 5320 x 34 x 1.1 mm Total power requirement: 3.0 kW Machine weight: approx. 2.1 t Space requirement: approx. 1.9 x 2.87 x 1.3 m SPECIAL OFFER PRICE!!! 2-column double miter band saw K-tech DG 62/45 HA-I • 2-column miter saw • Sturdy yet easy to operate • Material height sensor (automatic cut start detection) • Smooth operation thanks to oblique cut, feed controller, and cutting pressure controller • Heavy-duty material infeed roller • Removable chip tray (for cleaning) • Energy-saving and low vibration due to oblique cutting • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 -100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vise • LEDs for monitoring all safety functions • Large-dimensioned flywheels (520 mm) each • Clear miter adjustment up to 60° Semi-automatic function: 1. Clamp material 2. Start saw 3. Rapid feed down to material start or for serial cutting, direct sawing 4. Saw blade off 5. Raise frame just above the material 6. Vise opens

Kondisi: baik (bekas), Tahun pembuatan: 2017, In this offer, you are purchasing used office furniture in good condition. The items were delivered in 2017 and, having seen little use, remain in overall excellent shape. Items for Sale: We also offer complete workstation sets for €450 each. 1x Desk - Manufacturer: FM - 160 x 80 x 76 cm (continuously height-adjustable from 68 cm to 76 cm) - Grey desktop - Aluminium frame 1x Office Chair "Dauphin MagicShape elan" - With armrests - Fully adjustable - Upholstery: Polo grey/black 1x Mobile Pedestal Drawer Unit - Manufacturer: FM - 43.4 x 80 x 59 cm - One materials drawer Kwsdpfoiiv Iksx Ag Row - 3 steel drawers with soft-close - Lockable, key included Desks: • Approx. 10x desks, Manufacturer FM, 1600 x 800 x 680 to 760 mm (continuously height-adjustable), in light grey. Frame made of aluminium • Approx. 10x folding tables (usable as desks), 1600 x 800 x 720 mm on castors, in light grey. Frame made of aluminium • Approx. 2x round meeting tables, 1000 mm diameter, in light grey. Frame made of aluminium • Approx. 4x high tables, 1600 x 800 x 1300 mm, in arctic white. Frame in white, made of aluminium Chairs: • Approx. 10x Dauphin swivel chairs MagicShapeS elan with armrests and fully adjustable. Upholstered in Polo black, black plastic base • Approx. 44x Interstuhl Hero 550H cantilever chairs with armrests. Upholstered in ruby red, chrome metal frame • Approx. 52x Interstuhl Hero 550H cantilever chairs with armrests. Upholstered in ocean blue, chrome metal frame • Approx. 10x Interstuhl Kinecticis5 710K bar stools with footrest. Upholstered in black, frame in silver • Approx. 16x Interstuhl Kinecticis5 710K bar stools with footrest. Upholstered in ocean blue, frame in silver • 12x Interstuhl Kinecticis5 710K bar stools with footrest. Upholstered in red, frame in silver • 16x Interstuhl Kinecticis5 710K bar stools with footrest. Upholstered in ruby red, frame in silver Storage: • Approx. 16x FM mobile pedestal units, 434 x 800 x 590 mm, with one materials drawer and 3 steel drawers. Body in light grey, aluminium handles Meeting table with 4 conference chairs – €750 net High table with 6 bar stools – €1,500 net Prices may vary slightly depending on the quantity purchased. We are happy to provide a suitable offer upon request. Each item can also be purchased individually. Condition: Please note, these are used furniture items and may show signs of wear (minor scratches or discolorations). Packaging and Shipping: You are welcome to inspect all items during our business hours by appointment! Seaworthy packaging and worldwide shipping available on request! For more information, please feel free to contact us directly.

Tahun pembuatan: 2003, Kondisi: bekas, Press force 100 t Stroke 10-130 mm Strokes per minute 30-90 spm Throat depth 330 mm Ram adjustment 100 mm Table area 950x660 mm Ram area 540x440 mm Passage opening in table Ø 230 mm Table height 1000 mm Ram bore Ø 50 mm Total power requirement 7.5 kW Machine weight approx. 7 t Pneumatic clutch-brake combination Beutler Datatech press control Centralized oil lubrication Hydraulic overload protection in ram Manual stroke adjustment Manual ram adjustment Ksdpfx Agora Rr Ee Rsww Two-hand operation Foot operation GSW straightening and feed machine VRMA 40/78, year of construction 2003 Feed controller HDS 50 BSA decoiler NO20/400V-AP