Pusat pemesinan vertikal

HERMLE B 300 V

Kondisi: baik (bekas), Tahun pembuatan: 2007, Mesin bubut bekas OKUMA Psdjv S Svvspfx Anwegl - Model: LT200-M TwinStar - Tahun: 2007 - Termasuk konveyor serpihan - Tangki pendingin - Siap tersedia segera

Kondisi: baik (bekas), Tahun pembuatan: 2007, Die von Hand gezeigten Teile sind nicht enthalten. Technische Details siehe Abbildung. Pgedporpn Dvofx Anwel

Kondisi: bekas, Tahun pembuatan: 1996, spindeldurchlass-80-mm-traub-tna400 Podpoxbtqvefx Anwsgl

Kondisi: diremajakan ulang (bekas), Conventional parallel lathe MORANDO Model SR26 1300 X 7000 mm Machine fully reconditioned according to CE standards. New Turcite; new electrical and hydraulic systems. Bed regrinding performed. Safety features compliant with accident prevention regulations, including protective guards. Heavy-duty series with single-piece cast iron bed. Ways as good as new. Four-jaw chuck diameter: 1700 mm. No. 2 steady rests. Pgedpfswbfw Dex Anwol Maximum workpiece weight between centers, without steady rests: 25,000 – 30,000 kg. Maximum workpiece weight between centers, with steady rests and tailstock: 38,000 kg. Center height: 1300 mm. Swing over bed: 2615 mm. Swing over carriage: 2240 mm. Bed width: 1500 mm. Distance between centers: 7000 mm. Chuck diameter: 1700 mm. Spindle motor: 50 – 80 Hp. Number of speed ranges: 24. Spindle speed range: 1 – 200 Rpm. Dimensions: Length: 11,800 mm Height: 3,000 mm Approx. weight: 35,000 kg Machine can be inspected under power.

Kondisi: baik (bekas), Tahun pembuatan: 2010, ref-10646 Pgjdpsy Hrn Hofx Anwol

Kondisi: sangat baik (bekas), Tahun pembuatan: 2015, jam operasional: 32.000 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.000 mm, jarak lintasan sumbu Y: 1.000 mm, jarak gerak sumbu Z: 1.000 mm, gerak cepat sumbu X: 50 m/menit, pergeseran cepat sumbu Y: 50 m/menit, pergerakan cepat sumbu Z: 50 m/menit, model controller: Sinumerik 840Dsl, tegangan masuk: 400 V, jenis arus masuk: AC (pendingin udara), Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, 2x Heller H6000 + Fastems Container Automation Horizontal Machining Centers with Flexible Pallet Container Heller H6000 2 machines with identical specifications Traverse paths Feed force X 1000mm 15kN Y 1000mm 15kN Z 1000mm 20kN B 360°, 0.001° Direct path measuring system in all axes Rapid traverses: Axis dynamics Power X/Y/Z 50 m/min, 5 m/s² B 25 rpm Spindle – Power Cutting Interface: HSK100 Speed: 5–8000 rpm Power: 43 kW (40% duty cycle) Torque: 822 Nm (40% duty cycle) Last spindle replacement: 2020 Tool magazine Type: Rack magazine Number of magazine slots: 265 Max. tool length: 600 mm Max. diameter: 280 mm Tool coding: Balluf chip Second operator panel at setup station Setup station with 7 transfer stations Pallet changer system Pallets: 630 x 630 mm Max. interference circle: 1000 mm Max. height: 1200 mm Max. weight: 1000 kg Coolant system: Scraper belt chip conveyor Knoll coolant system Paper belt filter ICS 50 bar, frequency-controlled Work area flushing Emulsion mist extraction Window cleaning air blast for operator door Additional equipment: Facing slide unit (contouring axis/U-axis) 4 facing slides per machine Tangential control incl. NC cycles Radio touch probe (Renishaw) Space requirement: 7100 x 3750 x 4300 mm (L x W x H) Machine weight: 15600 kg Total power requirement: 44 kVA Control system: Sinumerik 840D sl Fast drill breakage detection Process-integrated tool monitoring Status lights 3D data for work area modeling Operating data acquisition (OPC/UA) Year of manufacture: 2015 Operating hours: approx. 32,000 h (Machines still in operation) Fastems Pallet Automation FPC1500 Base container with 2 setup stations Pjdpexxx Dcjfx Anwogl Extension container Total of 20 pallet stations on 2 levels Control: MMS Space requirement: approx. 18 x 2.4 x 4.2 m Total space requirement for the cell (2x Heller + Fastems) Approx. 18 x 10 x 4.5 m Machines are still in active production. Inspection by appointment. Relocation/transport of the machines can be organized.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2016, jam operasional: 8.737 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 800 mm, jarak gerak sumbu Z: 800 mm, gerak cepat sumbu X: 30 m/menit, pergeseran cepat sumbu Y: 30 m/menit, pergerakan cepat sumbu Z: 30 m/menit, Matec 30HV 3000x800x800 mm Kepala NC ayun dapat diputar +/- 105 derajat Heidenhain TNC640 Handwheel Spindel motor 15.000 rpm / 30 kW / 198 Nm Koneksi alat HSK 63A 48 posisi alat IKZ 40 Bar Sistem filter sabuk 450 liter Udara melalui spindel Penyedot kabut oli (kiri dan kanan) Sekat untuk operasi ayun Pintu samping untuk pemuatan Persiapan untuk sumbu NC tambahan Proba ukur 3D Renishaw RMP60 Pengontrol patah alat (laser) Pgjdpfx Ansyaa Sfswel Sistem hidrolik penjepit 100 Bar / 10 L./menit 2 x sirkuit penjepit, penjepitan, pelepasan, manual dan melalui fungsi M Antarmuka robot Mesin hanya beroperasi sangat sedikit dan selalu dirawat dengan sempurna. Riwayat (perawatan) lengkap tersedia pada kami. Alat dan ragum dapat diambil bersamaan dengan mesin.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2015, jam operasional: 12.244 h, kecepatan spindel (maks.): 4.500 rpm, jarak pergerakan sumbu X: 230 mm, jarak gerak sumbu Z: 740 mm, daya motor spindle: 11.000 W, tinggi total: 1.620 mm, berat keseluruhan: 4.200 kg, produsen pengendali: SIEMENS, model controller: 840D-SolutionLine, jumlah sumbu: 2, This 2-axis horizontal lathe SPINNER TC 600-65MC was manufactured in 2015 and is equipped with a Siemens 840D control system and a 16-station turret. It features a main spindle with speeds up to 4,000 rpm and a power output of 24 kW. The machine offers a swing diameter over the bed of 425 mm and a maximum turning diameter of 310 mm. Consider the opportunity to purchase this SPINNER TC 600-65MC horizontal lathe. Contact us for further details about this machine. Additional Equipment • Full enclosure splash guard + coolant system • Work area lighting + pneumatic equipment • Panoramic window for optimal visibility of the working area Machine Advantages Technical Advantages • Centre distance: approx. 600 mm • Maximum turning diameter: 310 mm • Spindle torque: main spindle (Fanuc, S6 40%) 178 Nm, main spindle (Siemens, S6 40%) 301 Nm • Quill stroke: 120 mm • Travel: 475 mm • Speed of driven tools: 6,000 rpm • Driven tool power: (Fanuc, 30 min) 3.7 kW, (Siemens, 40%) 6.0 kW Additional Information Media Pneumatics max. operating pressure: 10 bar Standard pressure: 6 bar Hydraulics max. operating pressure: 30 bar Control Control system: Standard Siemens 840D, Option Fanuc 21i Operating voltage: 400 V Mains frequency: 50/60 Hz Pgedpfx Anjx D E Hnowjl Control voltage: 24 V DC Interfaces: USB, Ethernet, SPINNER-UNIMAG bar feeder (electric)

Kondisi: bekas, Tahun pembuatan: 1987, x-travel 500 mm y-travel 380 mm z-travel 300 mm Control: FANUC Total power requirement: 12 kW Machine weight approx. 2300 kg Space requirement approx. ... m S T A M A (FANUC) Vertical 3-axis CNC machining center Model: MC 010 Year of manufacture: 1987 # KMH 010 1110 Work area: Longitudinal travel X-axis: 500 mm Vertical travel Z-axis: 300 mm Cross travel Y-axis: 380 mm Table size / working area: 650 x 380 mm Table load capacity approx.: 200 kg Installation height between table/spindle: 240-540 mm Distance to spindle center approx.: 350 mm Tool holder: SK 30 Spindle speeds: 1,500 - 6,000 rpm Feed rates / rapid traverse max.: up to 1,000-4,000 mm/min / 15 m/min Drilling/milling capacity in steel: 20 mm / 130 cm³ Milling in aluminium: 500 cm³ AC main drive approx. 3.7 / 5.5 kW Total power approx. 12 kW - 380 V - 50 Hz Weight approx. 2,300 kg Accessories / special equipment: • Original FANUC control with screen and all modern subroutines, error diagnosis, electronic handwheel, RS 232, easy and fast programming, directly at the machine, etc. • Vertical turret head with 10 tool stations ISO 40, fast tool change time approx. 7 seconds chip-to-chip, • CNC-controlled rotary table mounted on the table (not a CNC axis), ideal as an indexing table, hydraulic, Type RST 2 • Separate coolant system • Various tool holders with and without tools Ideal machine for productive drilling, tapping, and milling in steel and aluminium. Psdpfxet Hw H Eo Anwjgl Condition: good to very good – demonstration-ready, under power. Delivery: immediate ex stock, loaded free onto truck. Payment: strictly net – upon receipt of invoice. We look forward to your order. We always have a large selection of all types of CNC machining centers in stock – please ask for alternatives!

Kondisi: bekas, Tahun pembuatan: 2001, de-hu-01 Pgjdpoxwdw Eofx Anwol