Pusat pemesinan universal

HERMLE C 40 UP

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2016, nomor mesin/kendaraan: 306533, Fungsionalitas: berfungsi sepenuhnya, ketinggian potong (maks.): 350 mm, lebar pemotongan (maks.): 610 mm, berat keseluruhan: 550 kg, panjang mata gergaji pita: 4.700 mm, RINCIAN TEKNIS Diameter roda pengarah: 630 mm Dimensi alat: 13 x 0,65 x 24 ZpZ Panjang pita gergaji: 4.700 mm Tinggi pemuatan: 1.065 mm Tinggi potong: 350 mm Lebar potong tanpa penahan lebar: 610 mm Lebar potong dengan penahan: 150 mm Kecepatan pemotongan: 10 - 100 m/menit Perjalanan meja: 600 mm Kecepatan feed meja: 0,03 - 0,3 m/menit RINCIAN MESIN Diameter koneksi ekstraksi: 1 x 120 mm + 1 x 100 mm Kecepatan aliran yang diperlukan: minimal 25 m/s Debit udara yang diperlukan: 1.725 m³/jam Dimensi & Berat Dimensi (P x L x T): 1.850 x 1.200 x 2.300 mm Berat mesin: 550 kg Daya motor: 0,75 kW Tegangan operasi: 400 Volt / 50 Hz Dkjdpeyzy Drsfx Ahuek Jenis arus: 3 x 400 Volt Sekring: maksimal 16 Ampere Penampang minimum: 1,5 mm²

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2011, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 111146, jarak pergerakan sumbu X: 1.100 mm, jarak lintasan sumbu Y: 610 mm, jarak gerak sumbu Z: 610 mm, kecepatan rotasi (maks.): 10.000 rpm, model controller: Heidenhain 530, TECHNICAL DETAILS Travel X-axis: 1,100 mm Travel Y-axis: 610 mm Travel Z-axis: 610 mm Spindle nose to table: 120–730 mm Machine table: 1,250 x 610 mm T-slots in table: 5 T-slot width: 18 mm T-slot spacing: 100 mm Spindle speed: 60–10,000 rpm Torque: 332 Nm Power: 13 kW Spindle cooling: Oil-cooled Rapid traverse X/Y/Z: 32 m/min Feed rate: 1–12,000 mm/min Positioning accuracy: ±0.005 mm Repeatability: ±0.003 mm Tool holder: SK40 Pull stud: DIN 69871/72 Tool changer: 30 stations Tool-to-tool change time: 1.5 s Max. tool weight: 7 kg Max. tool diameter: 76 mm Max. tool diameter with free adjacent slot: 140 mm Max. tool length: 300 mm MACHINE DETAILS Control system: Heidenhain 530 Compressed air: 3/8", 6–8 bar Power supply: 400 V / 75 A / 35 kVA Hydraulic oil: R32 (ISO 32) Central lubrication: R68 (ISO 68) Coolant tank: 250 l Guideways X/Y/Z: Linear 45/45/45 mm Machine bed: Cast iron Dksdpfx Ahjyzxz Njujk Machine weight: 7,500 kg EQUIPMENT IKZ 22 bar (internal coolant supply) Tool changer with 30 stations Oil-cooled spindle Central lubrication Coolant tank Linear guideways X/Y/Z Chip conveyor Electronic handwheel Note: The machine is sold without tools and vise.

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 2008, nomor mesin/kendaraan: 611080402022, Perlengkapan: pengumpan batang, TECHNICAL DETAILS Axis Speeds Positioning speed X-axis: 2,000 mm/s Bending speed Y-axis: 400 °/s Rotational speed Z-axis: 900 °/s Rotational speed R-axis: 110 °/s Positioning speed T-axis: 400 mm/s Tolerance X-axis: ±0.05 mm Tolerance T-axis: ±0.05 mm Tolerance Y-axis: ±0.05° Tolerance Z-axis: ±0.05° Tolerance R-axis: ±0.05° Bending Capacity Round profile (R = 35 kg/mm²): min. Ø 4 mm, max. Ø 22 x 1.5 mm Round profile stainless steel: min. Ø 4 mm, max. Ø 20 x 1.5 mm Round profile (brass/aluminum/copper): min. Ø 4 mm, max. Ø 28 x 1.5 mm Average output: 1,700–2,000 bends/hour Dedpfxeyzya Ts Ahuokk MACHINE DETAILS Hydraulic system Tank capacity: 80 l Pump displacement: 13 l/min Pressure MR200E: max. 140 bar Ambient Conditions Ambient temperature: 5 to 40 °C Storage temperature: max. 70 °C, 24 h Relative humidity: 5 to 75%, 24 h Electrical Data Supply voltage: 400 V ±5 % Supply type: three-phase without neutral Frequency: 50 Hz ±0.1 % Connected load: 9.5 kVA Rated current: 15 A Dimensions & Weight Dimensions (L x W x H): 3,400 x 1,100 x 1,530 mm Machine weight: 1,850 kg EQUIPMENT BLM bar loader BLM CARM 7 Bar loader weight: 650 kg Conveyor belt Note: The machine is sold without protective guard.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 635949, kapasitas angkut: 210 kg, jangkauan lengan: 2.696 mm, akurasi pengulangan: 0,06 mm, jumlah sumbu: 6, DETAIL TEKNIS Kapasitas angkat: 210 kg Dodpoyzyvhjfx Ahuekk Jangkauan lengan: 2.696 mm Overhang: 2.696 mm Sumbu: 6 Repeatability: 0,06 mm DETAIL MESIN Dimensi panel kontrol (P x L x T): 800 x 560 x 1.060 mm PERLENGKAPAN Robot Panel kontrol Kabel Teachbox

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, Tahun pembuatan: 1997, nomor mesin/kendaraan: 605970300001, model controller: DOC 85C, jumlah sumbu: 5, berat keseluruhan: 1.500 kg, Perlengkapan: pengumpan batang, en-001 Dsdsyzyh Depfx Ahuokk

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2018, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: H18/X2090/202/00162, kapasitas angkut: 14 kg, jangkauan lengan: 1.000 mm, akurasi pengulangan: 0,03 mm, TECHNICAL DETAILS Payload: 14 kg Arm reach: 1,000 mm Repeatability: 0.03 mm Dedpfoyzyxcjx Ahuskk Maximum rotation angle: 350° Maximum speed (angular): 16.8°/s Maximum speed (linear): 0.6 m/s Platform positioning accuracy: 10 mm MACHINE DETAILS Dimensions & Weight Dimensions (without robot arm, W x D x H): 890 x 1,120 x 1,000 mm Total weight: 730 kg Power supply: 1 x 230 V / 16 A Battery capacity: 5.8 - 8.7 kWh Number of laser scanners: 3 Scan plane height: 150 mm Compressed air tank: 0.75 l / 7 bar Wrist protection rating: IP67 Arm protection rating: IP65 System protection rating: IP20 Maximum average surface pressure on the floor: 10 N/mm² Drive type: Differential drive EQUIPMENT Tool tray: 4 tools per tray Tool changer system: MPS032 Navigation: laser scanner-based Interfaces: WLAN, LAN, fieldbus Multi-coupling: compressed air, power supply, 2x Cat5e, 26 x 1 mm contacts Optical and acoustic signaling: 4 LED units, storage for up to 16 audio files

Kondisi: bekas, Tahun pembuatan: 2010, USED MACHINING CENTER HERMLE MODEL C 40 UP Year of manufacture: 2010 Control unit: HEIDENHAIN iTNC 530 Travel: X 850 mm, Y 700 mm, Z 500 mm Linear axes (X-Y-Z) Dynamic Version Dedpfxsxvq Iue Ahuekk Milling spindle: 18,000 rpm Spindle taper: HSK-A63 Tool magazine with 38 positions NC-controlled rotary-tilting table, diameter 800 mm, for PALLET CHANGER C-axis with torque motor, A-axis with tandem drive Includes pallet clamping system, hydraulic and pneumatic expansion, bed wash, automatic cabin door opening/closing (Load capacity 1,400 kg) Pallet changer device PW 800 for SRT 800 PW - 630 x 630 Load capacity: 800 kg Swiveling loading/unloading station for PW 800 Auxiliary control for clamping system operation for PW 800 Internal coolant supply 80 bar, including: Paper filter, Standard coolant unit, Linear scale pressurization, bed wash Chip conveyor Air blast cleaning device Manual cabin cover opening/closing Polycarbonate safety windows HEIDENHAIN thermal compensation Electronic handwheel Renishaw measuring probe incl. preparation Laser system - Blum Chip wash gun Signal tower No. 2 pallets 630x630 Additional articulated arm