Pusat pemesinan 5 sumbu

HERMLE C22U

Kondisi: bekas, Tahun pembuatan: 2013, Travel X: 450 mm Travel Y: 600 mm Travel Z: 330 mm Control: iTNC 530 HSCI Heidenhain Max. spindle speed: 18,000 rpm Main spindle drive power: 31 / 17 kW Max. torque: 98 / 54 Nm Tool holder: HSK A63 Rotary table diameter: 320 mm Swivel range A-axis: +/- 135° Rotation C-axis: 360° Max. table load: 300 kg Rotational speed A-axis: 25 rpm / C-axis: 40 rpm T-slots: 4 x 14H7 Number of tool positions: 55 Tool holder: HSK A63 Max. tool diameter: 80 mm Max. tool diameter with free adjacent slot: 125 mm Max. tool length: 250 mm Max. tool weight: 8.0 kg Max. total tool weight: 220 kg Tool change time (chip-to-chip): 4.5 sec Acceleration: 8 m/sec² Feed force: 4.5 kN Rapid traverse (X / Y / Z): 30 m/min Total power requirement: 40 kVA Machine weight approx.: 9.0 t Space requirement approx.: 6.5 x 6.5 x 3.5 m 5-axis CNC universal machining centre HERMLE - C 22 U - Good condition! Ledpfx Ast Syf Usdnorh - Linear axes XYZ and drives renewed - New spindle Q1/2024 - Optional: Retrofitting of high-pressure coolant system (IKZ) by Hermle possible at extra cost - Additional tank with paper band filter incl. level monitoring - Modification of coolant tank to lift pump incl. level monitoring

Kondisi: sangat baik (bekas), Tahun pembuatan: 2008, Fungsionalitas: berfungsi sepenuhnya, SPINDEL UTAMA: Ujung Spindel: A2-8 Daya penggerak spindle utama: 18,5 kW Kecepatan maksimum spindle utama: 4.000 rpm Diameter tembus spindle maksimum: 80 mm Diameter maksimum yang dapat dikerjakan: 366 mm Sumbu C 0,001 derajat REVOLVER: Jumlah posisi: 12 unit Jumlah alat pemotong berpenggerak: 12 unit Jarak gerak sumbu X/Z: 280 / 785 mm Jarak gerak sumbu Y: +/- 50 mm Lodpfxsx Rvgzj Adnorh Kecepatan maksimum alat pemotong berpenggerak: 6.000 rpm Daya alat pemotong berpenggerak: 5,5 kW EKOR MESIN: Kepala Morse: MK5 Jarak antar puncak: 705 mm SUPLAI LISTRIK: Daya total penggerak: 39 kVA BOBOT DAN DIMENSI: Kebutuhan ruang: 3.800 x 2.143 mm Tinggi mesin: 2.232 mm Berat mesin: 6.100 kg AKSESORIS: Kontrol: MORI MSX-850 II Alat pengukur alat Pengeluar bagian Konveyor serpihan Tangki pendingin Pemegang alat dan alat pemotong berpenggerak

Kondisi: bekas, Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 0728, en-23060701 Lrjdpfoxgnfxjx Adneh

Kondisi: baik (bekas), Tahun pembuatan: 2002, Fungsionalitas: berfungsi sepenuhnya, DE Lredpjr Hr Arefx Adnjh

Kondisi: bekas, Tahun pembuatan: 2017, jam operasional: 1.400 h, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.450 mm, jarak lintasan sumbu Y: 700 mm, jarak gerak sumbu Z: 550 mm, gerak cepat sumbu X: 42 m/menit, pergeseran cepat sumbu Y: 42 m/menit, pergerakan cepat sumbu Z: 42 m/menit, kecepatan spindel (maks.): 14.000 rpm, CNC: Heidenhain 640 AREA KERJA Sumbu X: 1.450 mm Sumbu Y: 700 mm Sumbu Z: 550 mm Pergerakan cepat (X/Y/Z): 42 m/menit Kecepatan maksimum spindle: 14.000 rpm Tipe shank alat: SK 40 Kapasitas rak alat: 30 Dimensi meja: 1.760 × 750 mm Beban maksimal meja: 2.000 kg PERLENGKAPAN: • CNC HEIDENHAIN 640 • Pembaca file DXF Lodpfsya Imqjx Adnjrh • Persiapan untuk sumbu keempat • Presetter alat • Probing pengukuran benda kerja Heidenhain • Sistem pendingin tekanan tinggi melalui spindle 40 bar dengan tangki filtrasi kertas, kapasitas 600 liter • Meja berpendingin • Unit pendingin udara • Rak alat 30 posisi • Buku manual dan deklarasi CE

Kondisi: sangat baik (bekas), Tahun pembuatan: 2014, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 3.000 mm, jarak lintasan sumbu Y: 1.700 mm, jarak gerak sumbu Z: 1.500 mm, Heidenhain 530 Kepala frais diagonal dengan pengindeksan 2,5° x 2,5° Kecepatan hingga 6.000 rpm Penjepit alat SK50 Pendinginan internal dengan 36 bar Ledpfox I A Hvox Adnjrh Konveyor serpihan memanjang + konveyor melintang

Kondisi: baik (bekas), Tahun pembuatan: 2004, jam operasional: 77.711 h, jarak pergerakan sumbu X: 650 mm, jarak lintasan sumbu Y: 600 mm, jarak gerak sumbu Z: 500 mm, model controller: Heidenhain iTNC530, pergerakan cepat sumbu Z: 45.000 m/menit, gerak cepat sumbu X: 45.000 m/menit, pergeseran cepat sumbu Y: 45.000 m/menit, Perlengkapan: dokumentasi / manual, kecepatan rotasi dapat diubah tanpa batas, konveyor serpihan, Hermle C30 U Siemens 840D Jam kerja mesin: 77.711 jam, jam kerja spindle: 16.294 jam - Spindle HSK-A63, 10.000 rpm - 32 tempat alat - Meja putar SRT 280 mm dengan sistem penjepit terintegrasi SK50 (jika tidak diperlukan, dapat ditutup atau diubah menjadi sistem penjepit titik nol) - Pendinginan eksternal dengan cairan pendingin - Pendinginan internal dengan filter pita kertas, tekanan 80 bar - Pistol pembilas serbuk - Konveyor serbuk - Modul pengoperasian manual - Pintu kabin otomatis - 32 tempat alat ditambah 87 tempat tambahan (ZM87) - Kompensasi suhu Lredpsxcp R Iefx Adnjh - Pengukuran alat BLUM sisi - Probe ukur Renishaw - Wadah serbuk - Lampu status Mesin telah diperiksa sepenuhnya, tersedia protokol geometri dan pengukuran uji kebulatan. Mesin dapat dilihat dan diuji dengan listrik kapan saja. Kondisi sangat terawat.

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2022, Oil-hydraulic Double-Column Press 400 T with Sliding Table Press Type: Double-Column Press Thermally Neutral Range: 80 – 120 °C Number of Operator Sides: 1 side Forces: - Pressing Force max.: 4,000 kN - Free Tearing Force max.: 400 kN - Pressure Build-Up Time (Closed Tool, Steel on Steel): Max. 4 sec. Dimensions: - Length: 3,800 mm - Width: 4,475 mm - Max. Opening: 800 mm - Stroke: 800 mm - Table Height above floor: 1,100 mm - Total height above floor (overall height): approx. 4,300 mm - Minimum hall height: 5,500 mm - Parallelism deviation at 20°C: +/- 0.1 mm Deflection: - Determined at max. closing force with 70% coverage: ≤ 0.2 mm/m Weight: - Total weight of the press (without operating fluids and table plate): approx. 28 t Press Table: - Table size: 1,500 x 1,500 mm Speeds: - Fast closing speed: 100 mm/s - Pressing speed: 8 – 3 mm/s Noise Level: - Sound pressure level measured at 1.5m height at control panel according to DIN 45635-T16-KL3: max. 78 dB(A) Hydraulics: - Number of main cylinders/ram cylinders: 1 pc. - Operating pressure: max. 300 bar - Pressure build-up time (press): 4 sec. - Pressure accuracy during ram stroke: +/- 3 bar - Main pump: BOSCH REXROTH axial piston pump approx. 145 L/min - Oil volume: approx. HLP 46 MW, 1,000 liters - Ambient temperature: max. 40 °C - Oil temperature: max. 55 °C - Auxiliary pump: BOSCH REXROTH gear pump 10 L/min for pressure maintenance up to 300 sec. Electrical System: - Main supply: 400 V AC - Control voltage: 24 V DC Lredpfx Ajph Uk Njdnoh - Frequency: 50 Hz - Hydraulic main motor connection: 40 kW Features: - Sliding table press with 400 T capacity - Closing speed up to 100 mm/s (adjustable via touchscreen) - Opening speed up to 100 mm/s (adjustable via touchscreen) - Pressing speed start at 10 mm/s (adjustable via touchscreen) - Table plate size: 1,500 x 1,500 mm - Ram size approx. 1,600 x 1,500 mm - Oil temperature monitoring: 55°C warning, 60°C shutdown - Automatic lubrication (adjustable via touchscreen) - Free positioning of ram (adjustable via touchscreen) - SICK/PILZ light curtains 14 mm, front, up to 1,800 mm height - Hydraulic and mechanical ram locking - Circulation oil cooling (adjustable via touchscreen) - Ejector in table, 20 T press force, 350 mm stroke - Ejector travels outward with table - Table plate precision milled, with DIN 22 T-slots - Pressure setting from 60 T to 400 T (adjustable via touchscreen) - Travel limit optionally by pressure or position - Setup, single stroke, and automatic cycle operation (adjustable via touchscreen) - Swivelling control panel on cabinet - Two-hand safety operation, with open button, selector switch for manual/single stroke/automatic cycle - Assembly, commissioning, and training available at extra charge - Control system supplied by SIEMENS (S7 1200), with 9-inch touchscreen monitor. Scope of delivery includes SECOMEA Ethernet-based remote maintenance unit. - The press features two side windows, each 1,000 mm high and 800 mm wide, with double doors. (Sliding Table Press, Hydraulic Press, Double-Column Press)

Kondisi: hampir baru (bekas), Tahun pembuatan: 2019, CMZ TD45Y (2019) CNC LATHE WITH LIVE TOOLING AND “Y” AXIS Z 2,250 CNC FANUC 32i B 15” Color LCD Manual-Guide -Swing over bed: 950mm -Swing over carriage: 715mm -Max. turning diameter: 550mm -Max. turning length: 2,200mm -Axis travels: X: 380mm Y: +80 / -60mm Z: 2,200mm -Chuck diameter: 315/400mm -Bar capacity: 127mm -Spindle nose: ASA 11” A2 -Turning head: 2,200 rpm - 51kW (S3 25%) / 39kW (S1) -Max. torque: 3,600 Nm (Max), 3,000 Nm (S2 25%), 2,000 Nm (S1) -Powered turret: 12 stations (16 total) (1-station index in 0.25 sec) -Tool size: 25 x 25mm (diameter 50mm) -Live tools power: 13.7 / 11kW, 12,000 rpm -C-axis indexing: 0.001mm INCLUDED EQUIPMENT: -3-jaw hydraulic chuck CGH-21, Ø530mm -C axis 360° (0.001° indexing) -Tool presetter -Integrated tailstock -Programmable tailstock -High-pressure pump 30 bar -Chip conveyor -Preparation, base and logic for steady rest -Programmable hydraulic steady rest SMW AUTOBLOK SLU-X-4-ZS (30–245 mm) -Set of internal/external tool holders and powered tool holders -Set of CMZ and FANUC manuals Ljdpfoyklzmex Adnsrh CONDITION: Machine in excellent (like-new) condition. Can be seen in operation. Immediate delivery.

Kondisi: sangat baik (bekas), X 885, Y 800, Z 500 mm, A 30-120°, C 360°. HSK 63 Big Plus, 15.000 rpm, ATC 60 posisi, probe Renishaw, Heidenhain TNC 530. Lredpfx Aewzv Igsdnjh