Pusat mesin

Hermle U1130

Kondisi: baik (bekas), Tahun pembuatan: 2005, Hermle U 1130 / 5 sumbu simultan, tahun pembuatan 2005, kontrol Heidenhain iTNC 530, perjalanan sumbu X/Y/Z 1300/720/630 mm, penukar alat 28 posisi, holder HSK 63, ukuran meja 1000 x 800 mm, meja putar NC terintegrasi 360°, sumbu B tanpa langkah pada kepala frais NC, kecepatan spindle hingga 12.000 rpm, pendingin internal 80 bar, PLC expansion, ekstraksi kabut oli, total jam spindle 11.000. Itsdpfxjx D U Dcs Aaher

Kondisi: bekas, TECHNICAL DATA - Maximum workpiece dimensions: 650 x 420 [mm] Isdpfx Asuhcbceahstr - Maximum workpiece thickness: 160 [mm] - Maximum weight: 350 [kg] - Travel (X, Y, Z): 320 x 220 x 180 [mm] - Table feed rate: 900 [mm/min] - Wire feed speed: 0 - 10 [m/min] - Wire tension: 80 to 2500 [g] - Wire guide: Ø 0.25 [mm] - Tank capacity: 260 [l] - Dimensions: 3,200 x 2,200 x 2,000 [mm] - Weight: 1,900 [kg] EQUIPMENT - CNC FANUC 16W control - Cooling unit - Lubrication tank with pump - Automatic threading

Kondisi: sangat baik (bekas), Tahun pembuatan: 2000, DESCRIPTION Hermle C 800 V CNC Vertical Machining Center, built in 08/2000 in Germany. This milling center operates on three axes, with maximum X / Y / Z travels of 800, 600, and 500 mm, respectively. The machine is equipped with a Sinumerik 840D CNC control, connected via LAN cable to an external computer. Additionally, the machine is fitted with a chip conveyor, hydraulic clamping, a magazine for 87 tools, a swivel finder, and a control cabinet air conditioning unit. The spindle reaches a maximum speed of 15,000 rpm. Spindle hours approx. 4,500 hrs. The total weight of the machining center is approx. 7 tons. Technical Data of Hermle C 800 V CNC Machining Center: – Travel X / Y / Z axes: 800 / 600 / 500 mm – Rapid traverse: 35 m/min – Maximum spindle speed: 15,000 rpm – Oil mist extraction – Spindle power: 19 kW – Operating voltage: 400V; 3PH; 50Hz – Control voltage: 220V AC; 24V DC – Machine dimensions (L x W x H): 2.3 x 3 x 2.65 m – Total weight: 7,000 kg Equipment of the Hermle C800V CNC Machining Center: – CNC control: Sinumerik 840D – Tool magazine capacity: 87 slots – Toolholder type: SK40 – Coolant pump through the tool: 40 bar – Control cabinet air conditioning unit – Swivel finder – Chip conveyor Separately available as shown in the photos! – Tool presetting device – Various SK40 tool holders – Heidenhain TS32 probe, as new Itjdpfx Aeiva Dkoahjr

Kondisi: bekas, Tahun pembuatan: 2007, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.270 mm, jarak lintasan sumbu Y: 508 mm, jarak gerak sumbu Z: 635 mm, gerak cepat sumbu X: 35.600 m/menit, pergeseran cepat sumbu Y: 35.600 m/menit, pergerakan cepat sumbu Z: 35.600 m/menit, diameter benda kerja (maks.): 127 mm, jumlah slot dalam magazin alat: 31, panjang alat: 330 mm, Haas VF-4SSHE – Vertical Machining Center The Haas VF-4SSHE is a high-performance vertical machining center, built in 2007 and equipped with a Haas CNC control. Ideal for fast and precise machining operations, it offers generous work capacity in a compact footprint. Main technical specifications: Axis travels: X = 1,270 mm, Y = 508 mm, Z = 635 mm Spindle: ISO 40, 12,000 rpm, 22.4 kW Spindle-to-table distance: 107 – 742 mm Rapid traverses: 35,600 mm/min Working feeds: 21,200 mm/min Table: Size: 1,321 x 495 mm Load capacity: 800 kg Tool changer: Tool type: BT-40 Magazine capacity: 24 positions Max tool diameter (adjacent tool empty/filled): Ø64 / Ø127 mm Max tool length: 330 mm Max tool weight: 5.4 kg Additional equipment: Haas 4th axis rotary table Ø 310 mm High-pressure coolant system through the spindle Itedpfxowt Rips Aahor Washdown tank with pump Spindle chiller unit Auger-type chip conveyor Manuals, electrical diagrams, and CE declaration Machine dimensions: L 4,100 mm × W 2,600 mm × H 2,690 mm – Weight: 6,250 kg

Kondisi: baik (bekas), Tahun pembuatan: 2020, Fungsionalitas: berfungsi sepenuhnya, jarak pergerakan sumbu X: 1.000 mm, jarak lintasan sumbu Y: 550 mm, jarak gerak sumbu Z: 550 mm, CNC control Heidenhain TNC620 4th axis (NC rotary table) electronic handwheel 24-position tool changer internal coolant supply (IKZ) chip conveyor extraction unit Technical data: X-travel: 1000 mm Y-travel: 550 mm Z-travel: 550 mm Spindle taper: SK40 Spindle speed range: 10,000 rpm Table clamping area: 1000 x 600 mm Number of tool magazine positions: 24 Spindle drive capacity 40% duty cycle: 13.5 kW Itsdpfx Aotqd E Eeaher Weight approx.: 6,000 kg Technical data, accessories and machine description are subject to change and not binding.

Kondisi: diremaj di bengkel (bekas), Modernized machine with new LTG-StoreControl P control system Control system expansion optionally available External dimensions: Construction height: 8,700 mm Construction width: 3,500 mm Construction depth: 1,580 mm 51 carriers, each with a load capacity of 350 kg Itedpfx Aajd Spf Rehor with usable clear dimensions: Height: 255 mm Width: 3,050 mm Depth: 520 mm Chain pitch: 305 mm 51 galvanized intermediate shelves Total load capacity up to 19,000 kg Deposit table at 990 mm above finished floor level (FFL) with stainless steel worktop, 315 mm deep Color: grey Drive motor power: 1 x 3.8 kW / 400 Volt Subject to errors and technical modifications. Surfaces cleaned, signs of use and minor deformations possible. Delivery and assembly currently primarily in Germany, Austria and other neighboring countries.

Kondisi: bekas, Tahun pembuatan: 2008, vekt0a7i Ijdpjwvl Aiefx Aahstr

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2005, jam operasional: 9.400 h, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 8662, panjang pembubutan: 380 mm, diameter pembubutan: 400 mm, lubang spindel: 55 mm, kecepatan spindel (maks.): 5.000 rpm, kecepatan spindel (min.): 100 rpm, jarak pergerakan sumbu X: 160 mm, jarak lintasan sumbu Y: 440 mm, jarak gerak sumbu Z: 380 mm, daya motor spindle: 11 W, gerak cepat sumbu X: 20 m/menit, pergeseran cepat sumbu Y: 12 m/menit, pergerakan cepat sumbu Z: 20 m/menit, tinggi total: 1.900 mm, panjang total: 3.500 mm, lebar total: 1.650 mm, jenis arus masuk: tiga fasa, berat keseluruhan: 3.300 kg, saluran batang: 45 mm, hidung spindel: ASA 5", daya pompa pendingin: 75 W, diameter poros tailstock: 85 mm, Jumlah stasiun alat di turret alat 1: 12, Perlengkapan: dokumentasi / manual, CNC Lathe Biglia B301 – Used & Refurbished in Excellent Condition Year 2005, used and reconditioned, ideal for precision machining of small and medium-sized components. Robust, reliable, and compact machine equipped with a 12-position bidirectional turret, automatic tailstock, and belt-type chip conveyor. Perfect for machine shops and companies seeking a high-quality, ready-to-use CNC lathe. Main Technical Specifications: - Model: Biglia B301 - Year: 2005 Capacity: - Max swing diameter: 400 mm - Max bar working diameter: 45 mm Isdpfx Aajvw Agvshetr - Max chuck work diameter: 220 mm - Max turning length: 380 mm Spindle: - Spindle nose: ASA 5” - Spindle bore: 55 mm - Chuck: 3-jaw Autoblok 210 BH - Spindle speed: 100 – 5000 rpm - Spindle motor power: 11 – 15 kW Travels: - X-axis travel: 160 mm - Z-axis travel: 380 mm - B-axis travel: 440 mm Feeds: - Rapid traverse X/Z axes: 20 m/min - Rapid traverse B axis: 12 m/min Turret and Tailstock: - Turret: bidirectional, 12 positions - Automatic tailstock: yes - Tailstock quill diameter: 85 mm - Taper: MT4 Weight and Dimensions: - Machine weight: 3300 kg - Dimensions: 3500 × 1650 × 1900 mm (h) Included Accessories: - Belt-type chip conveyor - 12 static toolholders - Part catcher Condition and Availability: - Used machine, tested and in perfect operating condition - Ready for delivery - Available for inspection by appointment at our facility - Motion testing available by appointment at our facility Ideal for: precision machining, batch production, and applications on steel, aluminum, brass, and engineering plastics.

Kondisi: baru, Tahun pembuatan: 2024, New machine Year of manufacture: 2024 Equipment and technical data: Right-hand version Technical data: Overall dimensions: 1,900 x 1,410 mm Hopper opening: 1,044 x 1,044 mm Hopper height: 1,010 mm Hopper volume: 1.1 m³ Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput performance: up to 50 kg/h (depending on material) Paint finish: Weima standard Connected load: 400 V +/- 5% / 50 Hz Including: Press mechanism with filler cylinder, main cylinder, clamp cylinder Itedpfst Hagnsx Aahor Connector for transport pipe Chromed clamp Hydraulic tank 160 l with pump motor + valve control Safety switch for oil temperature Base plate 1,040 x 1,040 mm with agitator + motor and screw discharge chute + motor Side walls standard height 1,010 mm Base frame with rubber feet Control cabinet on hopper and electrical control Briquette length monitoring Automatic end position for all cylinders Manual control Automatic "On/Off" with level limit switch Material: planer shavings, sawdust from solid wood, loose, clean and free of foreign matter*/ Dimensions: max. 12 mm Throughput performance: approx. 50 m³/year/ * Foreign matter specification: Anything other than wood, wood pieces larger than 12 mm. Throughput is highly material-dependent. Listed figures are average values. Depending on mix ratio, moisture content, and material characteristics! Application case not or not fully known/specifed. Machine is sold appropriately and solution-oriented by a specialist dealer. With heat buildup in the hopper, running time may be drastically reduced depending on heat development. Availability: promptly Location: Solingen

Tahun pembuatan: 2001, Kondisi: hampir baru (bekas),