Crane yang terpasang pada truk

HIAB KM 604

Kondisi: seperti baru (mesin pameran), Fungsionalitas: berfungsi sepenuhnya, diameter putar di atas sled silang: 330 mm, lubang spindel: 78 mm, diameter pembubutan di atas alas geser: 520 mm, tinggi pusat: 260 mm, panjang pembubutan: 1.000 mm, gores kuas bulu: 127 mm, diameter quill: 68 mm, panjang total: 2.160 mm, lebar total: 810 mm, kecepatan spindel (maks.): 2.000 rpm, kecepatan spindel (min.): 20 rpm, lebar tempat tidur: 300 mm, berat keseluruhan: 1.810 kg, penjepit rumah spindel: MK 4, Perlengkapan: kecepatan rotasi dapat diubah tanpa batas, Centre height: 260 mm Centre distance: 1000 mm Spindle bore: 78 mm Spindle nose according to DIN 55029 Camlock D8 Spindle speed range: 20-2000 rpm Drive power: 7.5 kW Equipment includes, among others: - Infinitely variable speed control - Hardened and precision-ground Z-axis guideways - Turcite coatings (on mating surfaces) for the carriage and cross slide - Manual central lubrication with a pump for longitudinal and cross slides - Complete coolant system with rear splash guard and splash guard on the carriage - Chuck guard - Shift bar with 3 adjustable cams - Machine lamp Ksdpfx Aaoh Rvxhe Njdg - Fixed centre - Set of machine levelling plates

Kondisi: bekas, Tahun pembuatan: 2015, nomor mesin/kendaraan: A2536805, Pressure: 40 t Stroke: 250 mm Retracting Force: 6.3 t Motor: 5.5 kW Max. Working Height: 450 mm Max. Approach Speed: 90 mm/sec Pressing Speed: 10 mm/sec Travel Distance (w): 250 mm Ram Plate: 500 x 200 mm Table Plate: 600 x 650 mm with T-slots Table Cut-out: 200 x 170 mm Table Height: 850 mm Oil Tank: 200 l The described machine can be custom-built for you. Production time is approximately 5 months from receipt of payment. Approach: The press moves to the zero point at up to 90 mm/second. The positioning accuracy is 0.5 mm or better. Return: The press moves back to the end point at up to 90 mm/second. The accuracy here is 0.5 mm or better. The dwell time is adjustable from 0 to 10 seconds (in increments of 0.1 seconds). The press force can be adjusted between 10 and 40 tons (in bar). Further control details: The control system can be locked with a key switch. The key switch for the control system has the following functions: - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stops at any desired position when the switches are released.) - Manual operation for bending tasks at up to 9.5 mm/sec using two-hand control and automatic return to top dead center when both two-hand buttons are released. - Automatic operation with secure tooling at up to 200 mm/sec. This function is labeled with a warning on the control panel. Kdsdpfsfxyhfex Aa Njg In automatic mode, the machine may only be used with fully enclosed, secure tooling—this information is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via the two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. A key selector switch is used to toggle between automatic and manual operation. Position adjustment for top and bottom dead center as well as switching position for speed reduction is managed via sensors that are adjustable on a chrome-plated rod. A clamping thread allows for fine sensor adjustment—accuracy is +/- 0.5 mm. The press can be equipped with a bending blade and, using the two-hand control, can perform sheet metal bending as well as punching, notching, and bending in automatic mode with secure tooling.

Kondisi: baru, Pizzaofen mit zwei Ebenen, Haube und Gärkammer GMG Backkammer vollständig aus Schamottstein gefertigt Temperaturbereich: 50 bis 400°C Frontseite aus Edelstahl Digitale Steuerung Ober- und Unterhitze separat einstellbar Digitale Überwachung der Ober- und Unterhitze Digitales Fehlermeldesystem Schwere, temperaturbeständige Tür mit Spannfeder Doppelverglaste Tür für verstärkte Isolierung und Luftzirkulation Außenmaße: 149x110x194 cm Innenmaße: 105x70x15 cm Kdedsuu H Alspfx Aa Nsg Elektrische Leistung: 2 x 8 kW – 3NAC I 400 V Gärkammer: 149 x 93 x 90 cm – 3 kW und 230 V Gewicht: 500 kg

Kondisi: bekas, Tahun pembuatan: 1976, drehdaten-2024-1 Ksdpfx Aajxu Nrcs Nsdg

Kondisi: bekas, Tahun pembuatan: 2015, ukuran ban depan: 540/65R30, ukuran ban belakang: 650/65R42, Perlengkapan: rem angin bertekanan,

Tahun pembuatan: 1995, Kondisi: baik (bekas), Kuper veneer zig-zag splicing machine, model FW/1200-E Year of manufacture: 1995 Kedpfx Ajhbp Ifsa Nsdg S/N 3508 3179 Special features of the KUPER FW 1200 E: - High feed speed of 60 m/min - Electronically steplessly adjustable zig-zag width of the glue thread cutting device Max. veneer thickness: 3.0 mm Min. veneer thickness: 0.3 mm Glue thread with hot air heating Compressed air generation Disc for transporting the veneer across the veneer table Foot pedal control Feed speed: 35-60 m/min Voltage: 400 V, 50 Hz Total power: 1.35 kW Working height: 915 mm Weight approx.: 440 kg Dimensions: 2.12 m x 0.73 m x 1.55 m

Kondisi: sangat baik (bekas), Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Technical Specifications for Pallet Rack Beam: Racking System: Jung Heinrich Type: T Scope of Delivery: 01x Pallet rack beam, used Material color: orange Beam type: HN 120|20 Box profile: 120 x 50 mm Connector: 3 HK (hooks) Clear span: 2,700 mm Max. load capacity per pair of beams: 2,700 kg with evenly distributed load 02x Safety pins, used Design: fully galvanized For securing the cross beams against accidental lifting General information about the item: This item is offered for collection only. Any additional transport or shipment requested for this item will incur extra costs, which can be quoted separately according to the delivery location and volume. Our range of services at a glance: (Prices on request) Assembly and installation Our general assembly conditions apply Racking inspection Racking inspection according to DIN EN 15635 carried out in accordance with the requirements of BGR 234 Visual Inspection for all racking systems Delivery with our own fleet (without unloading) Kodpsixqirsfx Aa Nedg

Kondisi: sangat baik (bekas), Electrically powered wire rope winch Brand: Pfaff Model: Beta SL 2 Lifting capacity: 400 kg Year of manufacture: 2008 Length: 980 mm Width: 470 mm Height: 470 mm Kdodpfx Aaowf E Tas Nog

Kondisi: bekas, Tahun pembuatan: 1990, de-to-hu-001 Ksdehmribspfx Aa Nodg

Kondisi: baik (bekas), Tahun pembuatan: 1994, Fungsionalitas: berfungsi sepenuhnya, Steinert Electromagnetic Belt Separator Length: 1500 mm Width: 900 mm Year of manufacture: 1994 Protection class of magnet housing: IP44 Magnet output: 2.2 kW Material throughput speed: 1.8 m/s Drive power: 2.2 kW Control voltage: 230 V Kedpfx Aaovyuy Ho Nodg Operating voltage: 3x400 V Frequency: 50 Hz Weight: 2200 kg