Feed

Holzkraft VSA 2048L

Kondisi: baru, Feed Unit VSA 2048 L Holzkraft - Demonstration Machine - - Number of feed rollers: 4 - Feed speed: 2 - 33 m/min - Speed settings: 2 / 4 / 5.5 / 6.5 / 11 / 13 / 16.5 / 33 m/min - Maximum outreach: 1050 mm - Roller diameter: 120 mm - Roller width: 60 mm - Roller spring travel: 20 mm Dimensions and Weights: - Length (product) approx.: 1665 mm - Width/Depth (product) approx.: 220 mm - Height (product) approx.: 540 mm - Weight (net) approx.: 73.5 kg - Weight notes (net) approx.: including stand Electrical Data: - Drive motor power: 0.75 kW - Connection voltage: 400 V Giedpfx Aswfhg Njh Dep - Mains frequency: 50 Hz - new demonstration machine -

Kondisi: baru, mit Hobelwelle Typ: R-R-RP1300 Arbeitsbreite: 1300 mm Mindest-Arbeitslänge: 538 mm Arbeitshöhe: 3–110 mm Vorschubgeschwindigkeit: 6–30 m/min Godpod H Sc Eofx Ah Djip Gesamtmotorleistung: 77,12 kW Motorleistung, erste Einheit: 22 kW Motorleistung, zweite Einheit: 30 kW Motorleistung, dritte Einheit: 18,5 kW Schleifbandabmessung: 1330 x 2200 mm Arbeitsluftdruck: 0,55 MPa Absaugleistung: 12.000 m³/h Transportmaße: 3090 x 2020 x 2260 mm Gewicht: 4.700 kg

Kondisi: baik (bekas), Tahun pembuatan: 1988, Weiler lathe Model: Condor B 2-axis digital readout Centre height: 165 mm Centre distance: 750 mm Swing over bed: 330 mm Swing over cross slide: 185 mm Spindle bore: 40 mm Connected load: 3 kW Speed range: 22–2800 rpm Tailstock Morse taper: MK 3 Gjdpovgmbvsfx Ah Doip Coolant pump (not connected) Work light automatic longitudinal and cross feed Spindle brake - Hinged chuck guard - Splash guard Weight approx. 1,040 kg 3-jaw chuck Multifix B quick-change tool post Live centre

Kondisi: baru, Technical data: Gisdpfx Ahogtm U Aj Djp Working width: 1100 mm Abrasive belt size: 1120x2150 mm Max working height: 160 mm Steel calibration roller diameter: 150 mm Rubber roller diameter: 150 mm Sanding pad width: 50 mm Total motor power for both sanding units: 11 kW Abrasive belt speed: 16/18 m/s Feed motor power: 0.55 kW Continuously adjustable feed belt speed: 4-20 m/min Work table lift motor power: 0.25 kW Pneumatic pad, lifting/lowering: YES

Kondisi: sangat baik (bekas), sliding table saw Robland 3200 Silver Line scoring unit with separate motor, carriage length: 320 cm main motor: 7 kW 3 spindle speeds max. blade diameter: 450 mm Giedpjv S Hy Aofx Ah Djp blade tilt: 0–45° electrically adjustable with digital readout blade height adjustment: electric, without readout rip fence on the right, motorized adjustment up to 1240 mm digital readouts for the fence on the carriage angle cutting device included Brand-name machine in very good condition,

Kondisi: baik (bekas), 0302 Gisdoylhmzepfx Ah Djp

Kondisi: baru, Tahun pembuatan: 2026, Technical Data: • Extraction capacity ~ 5,200 m³/h • Motor power 3.0 kW Gioded H Rf Tepfx Ah Dsp • Speed 3,000 rpm • Voltage 400 V, 50 Hz • Extraction connection 250/200mm • Filter surface area 13.7 m² • Air velocity 28 m/sec • Number of filters 28 • Dimensions 752 x 1,982 x 2,144 mm • Weight 300 kg • Filter category G • Filter material: polyester • Noise level: 80 dB without connection, 65 dB when connected to the machine via ductwork Scope of delivery: • Complies with H-2 standard • Polyester filters, 5 microns • 2 containers • Chassis • Filter cleaning via vibratory system with control panel + €850 for models with fire extinguisher (Safe System)

Kondisi: sangat baik (bekas), Four-sided planer Weinig Maximum planing width: 230 mm Maximum planing height: 120 mm 5 heads: bottom - 5.5 kW; left and right - 11 kW each; top - 11 kW; bottom - 5.5 kW Feed motor: 4 kW Fully adjustable heads Electrically adjustable planing height and width Spindle diameter: 40 mm Feed via cardan shaft rollers, stepless adjustment Robust planer by WEINIG Machine length: 415 cm The machine has been inspected and is in original condition Giedjrigxyopfx Ah Dep

Kondisi: seperti baru (mesin pameran), Tahun pembuatan: 2025, en-GB Gsdpfxodqzcxe Ah Djip

Kondisi: baru, Saw blade diameter 420 x Ø 40 mm Cutting diameter 170 mm Cutting length 410 mm Saw blade dimensions 420x3.2/2.4x40 mm Speed 3,500 rpm Extraction port diameter 100 mm Total power requirement 3.0 kW Machine weight approx. 120 kg Space requirement approx. 1300 x 800 x 1600 mm - Cross-cut and mitre circular saw for cross-cutting applications * Drive motor 3.0 kW - 400 Volt - Double-sided mitre adjustment (60° / 45°) with fixed stops - Compound mitre cuts on both sides at 45°, with fixed stops - Robust cast iron construction - Precision recirculating ball bushing guide of the tool carriage on hardened and ground steel shafts - Manual saw feed - Continuously height-adjustable saw blade - Port for optional dust extraction Cutting data: - Cutting length at 90° = 410 mm - Cutting height at 90° = 170 mm - Cutting length at 45° = 290 mm - Cutting height at 45° = 115 mm Gedpfsxabztsx Ah Dsip Special accessories included: - Compound mitre adjustment via handwheel, adjustable on both sides (45°/45°) - Carbide-tipped circular saw blade 420x3.2/2.6x40 mm * Z = 108 FTZ negative, for aluminium and plastics - Continuously adjustable hydraulic feed brake - Pneumatic material clamping from above, standard equipment: * 2 vertical clamping cylinders, adjustable, with manual lever valve - 1x machine stand - More powerful drive motor (3.0 kW)