Roller conveyor

HOLZMA Rollenbahn | Drive palletrollenbaan

Kondisi: bekas, SANDWICH PANEL PRODUCTION LINE FOR DOORS AND WALLS UP TO 610 MM WIDTH, manufactured by METECO This sandwich panel production line is designed for manufacturing door and wall panels up to 610 mm wide, with an annual capacity of 1,500,000 m of panels per year. MAIN PRODUCTION DATA Width: 500 - 610 mm Thickness: 40 - 80 mm Capacity: 1,500,000 m panel/year TECHNICAL SPECIFICATIONS Line speed: 12 m/min Maximum coil weight: 10 tons Maximum coil outer diameter: 1,400 mm Coil inner diameter: 508 mm Maximum sheet width: 610 mm Maximum producible panel thickness: 80 mm Power supply: 400 V Frequency: 50Hz SUPPLY SCOPE Hjdpfx Aasvtpcis Njng 1. Upper sheet processing section - 10 T upper decoiler with coil car - Rollers and pinch roll - Upper coil steel frame - Polyethylene film applicator - Embossing machine for texture patterns - Press for decorative patterns - Upper forming machine with rollers (12 stands) - Upper forming steel frame - Upper sheet guide 2. Lower sheet processing section - Double lower decoiler 10 T with coil car - Polyethylene film applicator - Corona treatment machine - Embossing machine - Lower roll forming machine (12 stands) - Roller conveyor - Operator’s entry desk 3. Panel forming section - Hot air preheating oven - Sheet guiding unit - Steel reinforcement machine - High-pressure foaming plant - Foaming portal - Foaming booth - Side sealing system and tape applicator - Double-belt conveyor press - Double-belt heating system - Double-belt press - Roller output conveyor - Cutting saw - Soundproof cabin - Dust extraction unit - Operator control station 4. Stacking section - Automatic panel tilting unit - Stacking conveyor - Discharge conveyor - Packing section - Polystyrene spacer feeding system - Entry conveyor - Wrapping machine - Discharge conveyor - Packing machine 5. Panel production tools - Upper roll forming tools - Lower roll forming tools 6. List of additional machinery - Container station for polyol, isocyanate and additives - Pentane tank and accessories Width: 500 - 610 mm Line speed: 12 m / min Thickness: 40-80 mm Maximum coil weight: 10 Tons Maximum coil outer diameter: 1,400 mm Coil inner diameter: 508 mm Maximum sheet width: 610 mm Maximum producible panel thickness: 80 mm Power supply: 400 V Frequency: 50 Hz Capacity: 1,500,000 m panel/year

Kondisi: baik (bekas), Tahun pembuatan: 1992, JAESPA bandsawing machine, model W400 AZ Control: Minipos 807, Year of manufacture: 1992 Maximum cutting diameter (round material): 400 mm Blade dimensions: 5500 x 32 x 1.1 mm Automatic feed, minimum cut-off length: 20 mm Chip conveyor Total connected load: 4 kW Approx. weight: 2500 kg Hsdpfx Ajgf H Saoa Neng Accessories: 2x saw blades, 6 m roller conveyor with motorized drive, machine documentation available. Space requirements: 2.8 x 2.8 x 2 m

Kondisi: baru, Tahun pembuatan: 2023, The B-Series is suitable for bending your reinforcing steel into the desired shape. B-Series: B26, B36, B45X1, B50 BS-Series (double bending): BS36, BS45, BS50, BS60 (MG65 PRO) Product information: - Voltage: 380 V (16 A) - Motor power: 2.2 kW - 6 kW - Ideal for construction companies or on-site applications - Left and right bending possible (on BS models) - In addition to single-bend operations, bending sequences can be programmed - Inserts for different rebar diameters included in the accessories (including accessories) - Usable in automatic or manual mode Hnodpem Shffjfx Aa Nog - Bending capacities depend on steel strength as per table (see images) - Optionally available with digital control panel - Net weight: 215 kg - 850 kg Shipping: Europe-wide (self-collection also possible) If you have any questions, we will be glad to assist you!

Kondisi: baru, Tahun pembuatan: 2026, Crosscut and Mitre Saw Type: ZS 200 N – 5 kW Motor with machine stand, Saw tiltable via handwheel and worm gear (rear) Saw blade diameter: 520 mm, blade bore: 50 mm Blade speed: 2800 rpm 400 volt / 5 kW (S6/40%) motor with brake and automatic star-delta motor switching Cutting width at 90°: 420 mm Cutting width at 45° (swiveled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm Saw can be swiveled on one side up to approx. 25° for acute angles and tilted to the left up to 30° TCT circular saw blade 520x4.0/2.8 x 50 mm, 60 ATB teeth, negative hook angle, for wood RLH-ST60 measuring length 6.0 m, mounting side: left Length stop / roller conveyor, heavy-duty version, Stop carriage adjustable from operator position via handwheel, electronic-digital measuring display, stop carriage pneumatically clamped, stop flap folds away to the rear, with steel rollers, 60 mm diameter, roller pitch 200 mm, 400 mm roller width, with 4 support legs and connector, total length: 6.7 m Surcharge for digital electronic display unit Type: FIAMA EP6 for 230-volt mains operation, with electric ON/OFF switch and socket. Powerful dark red LED display. Higher precision than the battery-powered crystal display RO-ST60 4.0 m long infeed roller conveyor Mounting side: right Heavy-duty version, steel rollers: 60 mm diameter, roller pitch: 200 mm Hedpek H Ic Usfx Aa Nsng 400 mm roller width, 3 support legs and connector Location: Ex stock 54634 Bitburg - Immediately available - Image: similar. Machine still in original packaging

Tahun pembuatan: 2011, Kondisi: hampir baru (bekas), For sale: 1 roller conveyor, each including a geared motor. Hsdpfxjihpn Ns Aa Njng Technical data: Year of manufacture: 2011 Length: 12.75 m Width: 1.40 m Height: 1.00 m Load capacity: up to 4 tons Geared motor per roller conveyor: SEW-EURODRIVE R87 DREE90L4 (for further details, see type plate image) Three out of four roller tracks are equipped with a wooden side wall along the entire length. One roller track has a wooden side wall for a length of 5.20 m. Two out of four roller tracks are each equipped with 3 lateral removal systems (see pictures).

Kondisi: baik (bekas), Various heavy-duty roller conveyors, suitable for use as casting or cooling lines, immediately ready for operation. Hnjdpfx Aed Tx Ahja Neg

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, lebar kerja: 260 mm, tinggi penyerutan: 170 mm, diameter spindel: 40 mm, lebar perataan: 260 mm, tinggi kerja: 170 mm, daya motor pengumpan: 4.000 W, kecepatan spindel (maks.): 6.000 rpm, kecepatan spindel (min.): 6.000 rpm, jenis penyesuaian ketinggian: listrik, jumlah spindel: 5, frekuensi input: 50 Hz, Perlengkapan: kabin, rem mesin, Weinig Profimat 23 E Working width: 260 mm Working height: 170 mm 5 spindles Spindle diameter: 40 mm Spindle arrangement: 1- Bottom - 5.5 kW Hnedpfxsvgnb Re Aa Njg 2- Right + 3- Left - 11 kW 4- Top - 5.5 kW 5- Bottom - 11 kW Feed speed: 6 – 24 m/min - 4 kW Air cushion table Driven roller at outfeed table Supplied with tooling.

Kondisi: baru, Tahun pembuatan: 2025, Fungsionalitas: berfungsi sepenuhnya, de Hnedpowq Izwsfx Aa Nsg

Kondisi: baik (bekas), Tahun pembuatan: 2003, Manufacturer: KUKA Model: KR 210 L 180 Hsdeh Dw Dqopfx Aa Nsng Year of manufacture: 2003 Maximum load capacity: 150 kg

Kondisi: sangat baik (bekas), Coating and packaging line with thermoregulatable film, consisting of: a) Double conveyor belt (3000 mm x 1100 mm) for the application of corner protection devices. - Adjustable feed speed from 3 to 15 m/min. b) Stretch wrapping machine Model Compact 250/6R with motorized conveyor belt - Total machine length (with motorized belt) approx. 7600 mm - Spool holder (6 upper spools, max. width 2450 mm + 6 lower spools, max. width 1450 mm) - Cutting and cross-sealing machine (2500 mm) - Max. usable height 700 mm - Installed power 12 kW - With automatic device for packaging lightweight parts (from 1 to 5 kg) via sealing bar c) Thermal shrink tunnel - Total length approx. 4700 mm (of which approx. 3700 mm is the tunnel) with hot air circulation (heating by electric resistances and fan), installed total power kW ? - Conveyor with metal bars (width approx. 1500 mm) - Max. usable height 700 mm - Adjustable feed speed from 4 to 20 m/min (approx.) Hnjdpfx Asgp Diaja Nog d) ELME outfeed roller conveyor (idler rollers) for cooling (from approx. 3000 x 1500 mm)