Kartu kendali

Homag 2

Kondisi: siap digunakan (bekas), Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 0-200-03-8334, kecepatan pemakanan sumbu X: 24 m/menit, tinggi benda kerja (maks.): 60 mm, model controller: Power Control Pc 22, TECHNICAL DETAILS Panel height: 60 mm Solid wood: 20 mm PVC / ABS: 3 mm Feed speed: 24 m/min MACHINE DETAILS Control system: Power Control PC 22 Supply voltage: 480 V Frequency: 60 Hz Phases: 3~ + N Operating current: 51 A Protection: 63 A Phase circuit: 3~ Control voltage: 24 V EQUIPMENT Working height electronically adjustable via CNC Motorized rubberized belt with increased pressure Panel support guide Side roller conveyor with idler rollers for panel support Sanding unit Lamps for heating the panel edge 6-position coil holder magazine with automatic edge change via CNC Glue unit for EVA hot-melt adhesive with pre-melter and glue pot Edge pressure unit for straight profiles with electronically adjustable pressure rollers via CNC End trimming unit with 2 motors and automatic tilt adjustment Dsdpfx Aboydiymohscc Overlapping trimming/milling unit with 2 motors Glue/milling unit with 2 tilting motors, electronically adjustable via CNC Multifunctional 4-motor contouring unit (smoother + corner rounding) with numerical control, automatic adjustment Provision for the possible installation of an additional working group Edge scraper unit Oscillating brush unit

Kondisi: baik (bekas), de-to-hu Dedpecczlcofx Abhscc

Kondisi: belum diuji (bekas), Tahun pembuatan: 2008, jam operasional: 33.000 h, Fungsionalitas: belum diuji, kecepatan pemakanan sumbu X: 25 m/menit, tinggi benda kerja (maks.): 60 mm, tinggi kerja: 950 mm, model controller: Power Control PC22, TECHNICAL DETAILS Feed rate: 18 - 25 m/min Working height: 950 mm Minimum working width at workpiece thickness 22 mm: 55 mm Minimum working width at workpiece thickness 60 mm: 100 mm Workpiece overhang: 30 mm Workpiece thickness: 8 (12) - 60 mm Edge material strips max.: 0.4 - 20 mm Edge cross-section strips max.: 900 mm² Edge material coil: 0.3 - 3 mm Edge cross-section max. for PVC: 135 mm² Edge cross-section max. for veneer: 100 mm² Maximum coil diameter: 830 mm MACHINE DETAILS Control system: Power Control PC22 Pneumatic connection: 7 - 8 bar Operating hours: approx. 33,000 h EQUIPMENT Continuous machine frame for mounting processing units Dcjdpfjyc Sr Aox Abhsc Workpiece support with extendable roller rail, approx. 800 mm Glue roller drive at feed stop Glue pot lift-off at feed stop Workpiece-actuated glue pot clamping Automatically adjustable infeed fence Pneumatically controlled infeed stop 2-roller infeed device Infeed extension 500 mm Automatic adjustment of pressure zone Sliding carriage Boomerang ZHR05 return system pre-installed Workpiece support in extended scissor type Operating data acquisition Electric height adjustment Fixed stop side left Workpiece transport device Top pressure unit Release agent spraying unit Jointing milling unit, 2 x 3 kW A20 Basic gluing unit for coil material up to 3 mm and strip material up to 20 mm, with melting unit, granulate hopper, and quick-change system End trimming unit, 2 x 0.8 kW, with pneumatic adjustment Slip agent spraying unit Pre-milling unit 1.5 kW, pneumatically adjustable Contour milling unit FK13, 2 x 0.4 kW Universal milling unit 4 kW, controlled, with stepless axis Multi trim unit MN21 automatic Finishing unit FA11, with trimming unit, cleaning agent application, and buffing unit, pneumatically adjustable Noise protection Provision for additional processing units Note: The machine is sold without working tools. Container loading and seaworthy packaging by the seller is not possible.

Kondisi: siap digunakan (bekas), Tahun pembuatan: 2009, Mesin pelapis tepi diproduksi tahun 2009. HOMAG PROFI KAR310/11/A20/S2 ini dilengkapi dengan sistem pengembalian benda kerja BARBARIC. Pertimbangkan kesempatan untuk membeli mesin pelapis tepi HOMAG PROFI KAR310/11/A20/S2 ini. Hubungi kami untuk detail lebih lanjut. • Kondisi: Bekas Dodpfx Abeyhqi Djhscc Perlengkapan tambahan • Sistem pengembalian benda kerja BARBARIC

Kondisi: bekas, Tahun pembuatan: 2008, Used machine Year of manufacture: 2008 Condition: well-maintained, regularly serviced (last service by Homag in 11/2024) Equipment and technical data: - Minimum workpiece thickness: 12 mm - Maximum workpiece thickness: 60 mm - Minimum workpiece size (L×W): 240 × 55 mm (with 22 mm thickness) / 100 mm (with 60 mm thickness) - Edge thickness min: 0.3 mm (coil material) / 0.4 mm (strip material) - Edge thickness max: 3 mm (coil material) / 20 mm (strip material) - Feed speed: infinitely variable, 18–25 m/min (frequency-controlled) Dedpfxowx Aaqj Abhjcc - Adhesive type: EVA hot-melt glue - Glue application (trough / cartridge / nozzle): melting unit with granulate container - Glue volume / cartridge size: granulate container, melting capacity 18–35 kg/h, level regulated - Heat-up time: approx. 8–10 min - Edge magazine (positions): 2 coils (automatic coil change) - Automatic edge change: yes (automatic via PC22, manual override possible) - Pre-milling: 2 × 1.5 kW, 200 Hz, 12,000 rpm, pneumatically adjustable - Pressure zone: 1 pre-press roller Ø 150 mm + 6 post-press rollers Ø 70 mm, automatic adjustment - End trimming: HL84 trimming unit, 2 × 0.8 kW, pneumatically adjustable (bevel/straight) - Flush trimming: via pre-milling unit, pneumatically adjustable - Radius milling: profiling unit FK13, automatic 8-position tool changer (R = 2 mm) - Bevel/profile milling: yes, via FK13, pneumatically adjustable - Scraper: integrated in multi-finishing unit MN21 - Polishing: buffing unit in finishing aggregate FA11 - Jointing unit: jointing milling unit KAL310/A20/S2, 2 × 3 kW - Workpiece preheating: available - Release agent spray unit: top/bottom, type 2929 (F.01) - Extraction nozzles: multiple Ø 100 mm (individual extraction per unit) - Control: power control PC22 (industrial PC, woodCommander under Win XP embedded) - Operating voltage: 400 V, 50 / 60 Hz - CE / standards: CE-compliant according to EC Directive 98/37/EC Dimensions / space requirement: approx. 8,000 × 1,400 × 1,600 mm Weight: approx. 3,000 kg The return conveyor shown in the photos is not included in the scope of delivery! Availability: short notice Storage location: 63934 Röllbach

Kondisi: bekas, nomor mesin/kendaraan: 006042, Jenis tepi yang terpasang: tepi tipis, tepi tebal Sistem lem: EVA Dodpfx Aswacqljbhscc Edge join milling: ya Unit multifungsi: ya Unit milling atas: ya Kecepatan umpan maksimum: 25 m/menit Ketebalan papan maksimum: 40 mm Unit kerja: 9 unit

Kondisi: bekas, nomor mesin/kendaraan: 004592, Jenis tepi yang diaplikasikan: tepi tipis, tepi tebal, kayu solid Sistem lem: EVA Pre-milling: ya Unit multifungsi: ya Kecepatan maju maksimum: 24 m/menit Ketebalan panel maksimal: 60 mm Unit kerja: 8 unit Dcedpfjwcmxlox Abhsc

Kondisi: bekas, nomor mesin/kendaraan: 005321, Jenis tepi yang diaplikasikan: tepi tipis, tepi tebal Sistem lem: EVA, Laser Milling sambungan: ya Dsdpowcyavjfx Abhocc Kecepatan maju maksimum: 35 m/menit Ketebalan papan maksimum: 40 mm Unit kerja: 8 unit

Kondisi: bekas, nomor mesin/kendaraan: 008105, Jenis pinggiran terpasang: pinggiran tipis, pinggiran tebal, kayu solid Sistem lem: EVA Penyambungan penggilingan: ya Unit multifungsi: ya Unit penggilingan atas: ya Kecepatan makan maksimum: 18 m/menit Ketebalan papan maksimum: 60 mm Dcjdpsw Idgpofx Abhsc Unit kerja: 9 buah

Kondisi: bekas, nomor mesin/kendaraan: 008107, Posisi 1: Mesin edge banding satu sisi HOMAG + LIGMATECH-KAR 310/9/A20/S2 Dcjdpfjw U Rqzex Abhoc Posisi 2: Mesin pengembali panel HOMAG + LIGMATECH-KAR 310/9/A20/S2

Kondisi: bekas, Tahun pembuatan: 2005, en-001 Dcodeyfw Syopfx Abhjc