Mesin bor kontinu

HOMAG BST440/30/D

Kondisi: bekas, Tahun pembuatan: 2006, Technical Details: X-axis travel: 800 mm Y-axis travel: 800 mm Z-axis travel: 800 mm Spindle speed: 12,000 rpm Tool holder: SK 50 Control system: SIEMENS 840D ShopMill Tool changer: 240 positions Pallet size: 630 x 630 mm Spindle power: 52 kW / 430 Nm Total power requirement: 87 kVA Approx. machine weight: 15 t Horizontal machining center with pallet storage, NC rotary table, 2-station pallet changer, Internal coolant supply (IKZ) 40 bar, Prepared for Renishaw MP 10 infrared probe (probe not included), Mechanical tool breakage monitoring, Lsdpfopumdcsx Aa Ujhg Minimum quantity lubrication (MQL), Compressed air through spindle center, Electric oil mist extraction, Electronic handwheel, TRANSMIT function, High-precision package, BA 4, Laminated safety glass panel on the right door, Including FASTEMS FPC 1000 pallet system for a total of 14 pallets, including setup station, stacker crane, central controller, and 10 pallets Approx. 98,500 operating hours (main switch ON) Approx. 45,500 spindle hours

Kondisi: baik (bekas), Studer S30-12 Cylindrical Grinding Machine TECHNICAL DATA Main Dimensions Centre height: 125 mm Centre distance: 400 / 700 / 1025 mm Maximum longitudinal slide travel: 400 / 700 / 1000 mm Longitudinal Slide Table speed: 50 – 5000 mm/min Reversal delay: 0-6 s Minimum automatic feed: 1.5 mm Maximum travel: 400 / 700 / 1020 mm Maximum table swivel angle: 12 / 30 / 78° Lhjdpfx Aasvca Ize Uog Cross Slide Swivel range: ±45° Rapid traverse: 40 mm Handwheel feed travel: 20 mm Maximum plunge depth: 1.7 mm Grinding Spindle Headstock Grinding wheel diameter x width x bore: 450 x 80 x 203 mm Rotational speed: 1340 / 1500 / 1625 / 1800 / 2000 / 2200 rpm Coarse adjustment: 210 mm Workpiece Spindle Headstock Swivel range: 0 – 90° Speed range: 30 – 675 rpm Mounting taper: Morse 5 Collets: W25 Tailstock Mounting taper: Morse 3 Quill stroke: 30 mm Total power requirement: 5 / 8.25 kW No guarantee is given for the correctness, completeness, or currency of the information provided.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2019, Kolbus AutoBox AB tahun 2019 mesin untuk produksi kotak pengoperasian mudah kendali servo pergantian pekerjaan cepat cocok untuk kotak bergelombang memungkinkan produksi kotak sesuai permintaan MC MultiCut Modul modul PR beragam jenis kotak (FEFCO) Lhedpfx Aex El N Isa Ueg skoring, pemotongan melintang dan linear, penyayatan termasuk beberapa peralatan (lem, pisau baru) bagian pengiriman siap digunakan kondisi baik tersedia segera

Kondisi: baik (bekas), Tahun pembuatan: 2006, de-1 Ljdpsxtxi Ijfx Aa Uehg

Kondisi: sangat baik (bekas), Tahun pembuatan: 2005, Heidenhain digital readout Fehlmann cross table KS 322 D Working area: Quill stroke Z-axis 110 mm Travel of machine head 450 mm Table to spindle nose 0 – 527 mm Quick-change system SF 32 Ljdpfxswkrp Ee Aa Uohg Work spindle 2.9 kW Steplessly adjustable speed range 50 - 6300 rpm Clamping surface 320 x 670 mm Dimensions and weight: Space requirement (W x D x H) 1.5 m x 1.35 m x 2.1 m Weight approx. 850 kg

Kondisi: diremaj di bengkel (bekas), Tahun pembuatan: 2007, jam operasional: 22.605 h, Fungsionalitas: berfungsi sepenuhnya, gaya penekanan: 100 t, lebar bukaan pengisian: 1.100 mm, panjang bukaan pengisian: 1.600 mm, lebar bal: 1.100 mm, tinggi bal: 1.100 mm, berat bal: 1.400 kg, berat keseluruhan: 36.000 kg, kapasitas tangki oli: 1.300 l, tahun perombakan terakhir: 2025, For sale is a refurbished baler with 100 t press force, large-format bales 1100 x 1100 mm, 75 kW drive power and 10-way cross-tying. Technical specifications baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main press force: 100 t Pre-press force: 50 t Operating hours: 22,605 h Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Connected load: 126 kW Total current consumption: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 16 t/h Ledpsvf E Avefx Aa Uohg - 50 kg/m³: approx. 25 t/h - 100 kg/m³: approx. 47 t/h Bale weight up to 1,400 kg, depending on material and bale length Hydraulic oil tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operating panel: Schneider MAGELIS Touch Baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions without baler: 11,765 x 2,500 x 3,450 mm (L x W x H) Baler weight: approx. 36 t Remarks: The baler has been partially overhauled, serviced in our workshop, and tested after completion of work before being stored. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment works have been carried out: - Descaling and partial repainting of the baler. - Hydraulic oil tank drained, oil and air filters replaced. - New hydraulic oil filled. - All hydraulic hoses renewed. - Main hydraulic cylinder, two cylinders of the pre-press flap and the channel cylinder disassembled, dismantled, inspected, cylinder tubes honed, all seal kits replaced and final pressure tested. - Pre-press flap with bearings and bearing blocks disassembled. First and third circular arc segments removed and newly welded in. - Both shaft bearings for the pre-press flap renewed. - Upper material guide on the frame for the pre-press flap renewed. - Plunger disassembled, inspected and both front roller guides renewed. - Material guides and wear strips at the sides and on the bottom of the plunger cut out and newly welded in. - Horizontal and vertical needle and tying units disassembled, dismantled, inspected, plastic slide plates, bearings on twister shafts, and wire divert rollers with bearings in the needle heads renewed. - Both bronze slide rails left and right in the frame cover for the plunger renewed. - Both wire divert units left and right, including bale retaining clamps, fully renewed. - Wire infeed unit including hydraulic cylinder below the needle passes fully renewed. - Wire mark/scoring in the bottom and sidewalls of the channel welded up and smoothed. - General maintenance and service work carried out in line with manufacturer specifications. - Baler tested in manual and automatic mode, accepted and stored after completion of refurbishment works. We assume no liability for the technical details or possible errors.

Kondisi: bekas, Tahun pembuatan: 2010, en-overview-this-bottle-washing-machine-arcade-gel-6-was-built-i n-2010-by-the-german-manufacturer-gm-gera-the-machine-is-still-in -operation-and-can-be-inspected-at-any-time-the-arcade-gel-6-is-f ully-functional-and-is-being-replaced-due-to-an-increase-in-produ ction-capacity-technical-details-nominal-capacity-33-000-bph-adju stable-range-13-200-36-300-bph-chain-pitch-169-mm-cell-pitch-110- mm-bottle-cells-per-row-30-units-total-bottle-cells-7-860-units-l oaded-bottle-cells-7-680-units-consumption-compressed-air-1-m-3-s team-operation-489-kg-h-steam-heating-4-430-kg-h-electrical-power -48-4-kw-water-7-35-m-3-h-tank-volumes-pre-soak-2-263-l-alkaline- pre-wash-7-240-l-alkaline-tank-1-31-755-l-alkaline-tank-2-350-l-h ot-water-tank-1-350-l-hot-water-tank-2-350-l-cold-water-350-l Lodpfxst Ul Exj Aa Ujhg

Kondisi: baik (bekas), Tahun pembuatan: 2000, Fungsionalitas: berfungsi sepenuhnya, Cambio 500 debarking system consisting of: Infeed centering unit. Cambio 500 debarker: Rotor opening 495 mm. Minimum log diameter 90 mm. Drive motor 55 kW. Feed motor 11 kW. 80 m/min. Hydraulic rotor and feed rollers. Discharge control unit. Lhjdpewxdimefx Aa Ueg Tipping trough for long logs. Spare parts.

Kondisi: bekas, 3176 Planer and Moulder WEINIG Hydromat 1000 Used, Year of manufacture: 2007 6 spindles: bottom - right - left - top - top - bottom Electronic feed: 6 - 60 m/min Working width: 80 - 150 mm Working height: 23 - 65 mm Lamella finished width: 4 - 15 mm Max. number of lamellae: 16 pieces Lamella lengths: 400 - 4,000 mm 1st spindle horizontal bottom Brake motor 11 kW, 6,000 rpm Spindle diameter: 45 mm Tool diameter: 125 - 180 mm 2nd spindle vertical right Brake motor 7.5 kW, 6,000 rpm Diameter: 45 mm Tool diameter: 112 - 250 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm 3rd spindle vertical left 7.5 kW, 6,000 rpm Diameter: 45 mm Tool diameter: 112 - 250 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Pressure shoe in front of spindle, swiveling, pneumatic roller pressure 4th spindle horizontal top 15 kW, 6,000 rpm, diameter: 45 mm Tool diameter: 112 - 250 mm Max. profiling depth: 35 mm Axial adjustment: 45 mm Split pressure shoe in front of top spindle, adjustable and swiveling, pneumatic 5th spindle horizontal top as saw spindle Brake motor 37 kW, 5,000 rpm Diameter: 45 mm Axial adjustment reduced to 25 mm Tool diameter: 112 - 250 mm Max. saw depth: 35 mm Axial adjustment: 45 mm Split pressure shoe in front of top spindle, adjustable and swiveling, pneumatic 6th spindle horizontal bottom as saw spindle Lhodpfsu Agh Sox Aa Uog Brake motor 30 kW, 5,000 rpm Axial adjustment reduced to 25 mm Diameter: 45 mm Tool diameter: 112 - 250 mm Max. saw depth: 35 mm Axial adjustment: 45 mm All moulding spindles with high-performance bearings Electronic feed 7.5 kW Feed roller adjustment relative to left spindle, axial 35 mm Shortened roller spacing relative to right spindles Linear meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 powered rollers over table 1 powered, serrated roller in the table, side pressure roller Automatic Waxilit/lubricant pump Machine with 4-roller outfeed, oscillating shafts extended to 200 mm 2 powered, serrated rollers in outfeed table 2 powered, serrated rollers in the machine table Pressure beam before and discharge after top spindle with mechanical digital display DigiSet (digital dual display) for left and top spindles Electric height adjustment for top spindles and feed Machine already dismantled and stored Sale on behalf of customer, ex site near South Tyrol, without transport and installation Description and price subject to change Transport and loading by us optionally possible To avoid possible misunderstandings, inspection on site by appointment is possible and recommended Sale is as-is Technical specifications, condition description, year of manufacture, and delivery scope as per manufacturer’s brochure or previous owner, without guarantee Subject to prior sale No warranty is provided for used machines; it is sold as seen Images and videos serve as examples and do not constitute the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to collection or shipment Delivery terms: ex location

Kondisi: bekas, Tahun pembuatan: 2005, Machine weight approx. 7,800 kg Space requirement approx. 3,380 x 3,950 x 3,015 mm Workpiece with external gear: - Largest module (steel approx. 600 N/mm²): 3 mm - Maximum width: 26 mm - Maximum diameter: 100 mm Workpiece with internal gearing: - Largest module (steel approx. 600 N/mm²): 3 mm - Maximum width: 26 mm - Maximum swing diameter: 150 mm - Maximum internal diameter: 100 mm Tool: - Spindle taper in milling spindle: HSK-D63 - Milling spindle diameter: 85 mm - Maximum stroke length: 30 mm Machine travel distances: - Radial (X axis): 180 mm - Column swivel (B axis): -1 to +11 degrees Machine - workpiece table: - Outer diameter: 220 mm - Clamping diameter: 160 mm - Bore: 63 mm Speeds: - X-axis feed rate: 12,000 mm/min - Workpiece table (C axis): 0-400 rpm - Cutter (C2 axis): 0-300 rpm - Spindle stroke (A axis): 500-3,000 rpm Electrical equipment: - Operating voltage: 480V - Supply voltage: 115V - Control voltage: 24V - Frequency: 60 Hz - Connected load of the machine: 35 kVA - Cable cross-section: 35 mm² Lhsdpfeudc S Hjx Aa Ujg - Fusing: 80 A