Menjepit piring

Homag Größe 10930/500/H262 mm

Kondisi: baik (bekas), Tahun pembuatan: 1998, Press force: 315.00 t Stroke: 500 mm Throat depth: 425 mm Daylight (Table - Ram, Stroke up): 1,000 mm Table surface: 1,200 x 815 mm Table height above floor: 800 mm Ram surface: 1,100 x 700 mm Speed down: 48 mm/s Return speed: 330 mm/s Working speed: 19 mm/s Oil capacity: 1,600 l Power requirement: 82.0 kW Weight: 23.00 t Dimensions (WxDxH): 2.4 x 2.8 x 4.0 m Permitted for manual loading according to CE regulations Oil-hydraulic drive, pressure/time and stroke-dependent control, front light barrier (Sick), Dcjdpfx Aov Rwu Uskajn two-hand operation

Tahun pembuatan: 1999, Kondisi: hampir baru (bekas), Fungsionalitas: berfungsi sepenuhnya, Manufacturer: Arthur Klink Year of manufacture: 1999 Type: Horizontal broaching machine Model: RIW 10x1600x400 Weight: 2,700 kg General Information / Technical Data: Horizontal hydraulic internal broaching machine in near-new condition with tool support system, ideal for use with flat broaching tools. Dcjdpfx Aksr A Hcbeajn Broaching stroke: 1,600 mm Tensile force: 10,000 kg (100 kN) Reception in the drawbridge: Ø 85 mm cylindrical Pass-through bore in clamping table: Ø 100 mm Workpiece diameter: max. 400 mm (depending on machine body/tool pan) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 9 m/min Return speed: hydraulically infinitely variable from 1 m/min to 24 m/min Machine footprint (L x W x H): approx. 6,400 mm x 1,450 mm x 1,600 mm (without working area) Power supply: 400 Volt 50 Hz Connected load: 9 kW Equipment: • The machine features electric control for broaching stroke movement with manual operation as well as automatic cycle. • Integrated coolant and cutting fluid system. • Tool lift system for flat broaching tools (no feed mechanism). • The broaching slide with drawhead mounting features flat guides on both sides. Accessories: • 1 universal drawhead for flat shanks from 3 mm to max. 25 mm width and a maximum tensile force of 10 kN (10,000 kg). • Complete machine documentation, including CE Declaration of Conformity. Remarks: The machine is ideal for producing keyways. Thanks to the combination of the machine’s rigid bed and tool lift system, it is especially suitable for easy and quick use with flat broaching tools. The machine has seen very little use and is in near-new condition. It is available for inspection in our warehouse and is ready for demonstration under power. You will find our direct contact details and further information on the machine in the attached PDF document.

Kondisi: bekas, Tahun pembuatan: 1988, Spitzenweite 1200 mm Drehzahl A) 70 - 380 U/min. Drehzahl B) 380 - 2000 U/min Gewicht 2,2 t Drechselbank Dcsdpfx Aek Sat Dskaon +++++ Bitte beachten Sie, dass die Maschine im demontierten und verladebereiten Zustand ist. Aus diesem Grund ist eine Vorführung unter Strom oder die Fertigung eines Videos nicht möglich. Darüber hinaus enthält unsere Anzeige die aussagefähigsten Fotos von bestmöglicher Qualität. Die Zusendung weiterer Bilder ist leider nicht möglich. +++++

Kondisi: sangat baik (bekas), Tahun pembuatan: 2020, jarak pergerakan sumbu X: 8.000 mm, jarak lintasan sumbu Y: 1.300 mm, jarak gerak sumbu Z: 2.500 mm, gerak cepat sumbu X: 35.000 m/menit, pergeseran cepat sumbu Y: 40.000 m/menit, pergerakan cepat sumbu Z: 40.000 m/menit, lebar total: 5.800 mm, tinggi total: 4.500 mm, panjang total: 13.500 mm, panjang meja: 10.000 mm, lebar meja: 1.250 mm, High-Performance Column-Type Milling Machine – Precision and Machining Power Linear RAM guidance combined with hydrostatic HDS guide ACD2 milling head with 5,000 rpm and 1,400 Nm torque Aitek ATC chain magazine with 60 tool positions, L = 400 and Ø 250, max. 35 kg Coolant filtration with 15 bar high-pressure internal coolant supply (IKZ) Chip conveyor BLUM 3D probing system Wide bed, linear guidance in X-axis, traverse path W = 930 mm Rotary table drive pre-installed in control cabinet X-axis travel: 8,000 mm Dcsdpfx Akjyr Dmdsaen Y-axis travel: 1,300 mm Z-axis travel: 2,500 mm Table length: 10,000 mm Table width: 1,250 mm Spindle power: 40 kW Spindle speed: 5,000 rpm Tool holder: ISO 40/BT/MK X-axis feed rate: 35,000 mm/min Y-axis feed rate: 40,000 mm/min Z-axis feed rate: 40,000 mm/min Auto-indexing milling head: 0.001 x 0.001 degree Operating hours: 3,800 H Machine dimensions: Length: 13,500 mm Width: 5,800 mm Height: 4,500 mm Weight: 45,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, sourced from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, no representation or contractual liability is assumed. We recommend verifying all important details.

Kondisi: sangat baik (bekas), Tahun pembuatan: 2006, Fungsionalitas: berfungsi sepenuhnya, nomor mesin/kendaraan: 7213, Country of manufacture: Switzerland Net weight: approx. 2,550 kg Customs tariff code: 8458.11 20 Dcodpfxew T Tcwo Akasn Dimensions: 2,000 x 1,260 x 1,950 mm TECHNICAL SPECIFICATIONS 10-axis machine – standard version 10 axes, 6 spindles: Axes and spindle designation - 1 sliding headstock: Z1, S1 - 2 independent vertical tool carriers: X1Y1, S6 – X2Y2, S2 - 1 unit with 4 rotating spindles: X3Z3, S3 - 1 independent sub-spindle: Y4Z4, S4 - 1 independent secondary-operation rotating axis: X4, S5 Bar feed position: right of operator Machine axis height: 1,100 mm Main spindle stroke: max. 255 mm Bar capacity: 1 to 16 mm Spindle speed: 12,000 rpm Spindle feed rate: max. 20 m/min Bar capacity, min./max.: 13 mm / 16 mm Maximum workpiece length Guide bushing machining: 180 mm Collet machining: 30 mm Sub-spindle speed: 12,000 rpm Main spindle drive power: 2.2 kW (continuous) / 3.7 kW (intermittent) Sub-spindle drive power: 1.5 kW (continuous) / 2.2 kW (intermittent) Clamping collet, type: F20 (no. 76-201) Guide bushing: fixed / rotating Collet for guide bushing, type: Meister 605 Number of combined side tools: fixed: 2 x 5 / rotating: 3 + 3 Number of combined front tools: fixed: 4 / rotating: 3 Number of combined rear tools: fixed: 3 + 3 / rotating: 3 + 3 Tool section: 12 x 12 mm Rotary tool holder collet: standard ESX 20 Bar feeder: yes Parts catcher: yes All technical data provided without obligation and subject to errors or omissions.

Tahun pembuatan: 1995, Kondisi: bekas, nomor mesin/kendaraan: 18891, Towing capacity: 10 tons. Lift: 1000 mm Dodpfebrcmkox Akascn 3 broaching stations With chip conveyor + platform for above-floor installation and safety door

Kondisi: hampir baru (bekas), Tahun pembuatan: 2021, Offered is a double-spindle pick-up lathe, EMAG VSC 500 DUO. The machine is equipped with 2 independent work spindles and 2 EMAG turrets. It is capable of machining either two identical components with the same operation simultaneously, or processing a single workpiece in two consecutive machining steps. According to requirements, the machine can be equipped with additional peripherals (chip conveyor, coolant system, external automation, etc.). CONTROL UNIT Siemens 840 Dsl TECHNICAL DATA Max. workpiece diameter: 440 mm Max. workpiece height: 250 mm Chuck diameter: 450 mm Swing diameter: 550 mm X-axis travel: 925 mm Z-axis travel: 400 mm TOOL CARRIERS 2 x EMAG disc turrets, 12 x CDI 68, with driven tools Price, delivery time and machine configuration upon request. Djdpfjt Du Tdsx Akaecn

Kondisi: bekas, Tahun pembuatan: 1999, translation_de_hu_001 Dcodpfevxwqfjx Akaen

Kondisi: bekas, Tahun pembuatan: 1972, Maximum pulling force: 10 t Maximum stroke: 1250 mm Maximum cutting speed: 10 m/min Maximum return speed: 25 m/min Broaching stations: 3 units Passage width: 470 mm Station pitch: 125 mm Table: 400 x 400 mm Special features: Chip removal via permanent magnetic chip conveyor Dedpecdtnhofx Akaecn 1 hydraulic system, 1 working platform, electric hydraulic shank and end-piece clamping confirmation, automatic loading device

Kondisi: baru, Load capacity: 15,000 kg Height: 790 - 1,150 mm Width: 1,200 mm Height adjustable (yes/no): yes Height adjustment: 790 - 1,150 mm Support surface: 120 x 1,200 mm Jack stand, assembly stand, steel trestle, welding table, assembly table, steel trestle, work trestle Dcjdpfx Akegvkaqoajn - Our jack stands are characterized by their robust construction, high load-bearing stability, and extremely durable lifespan. - Powder-coated in RAL 5010 gentian blue - CE marking - Transport on request